Retention behaviour of some high-intensity sweeteners on different SPE sorbents

The objective of this paper is to provide information about application of solid-phase extraction (SPE) for isolation of nine high-intensity sweeteners (acesulfame-K, alitame, aspartame, cyclamate, dulcin, neotame, saccharin, sucralose and neohesperidin dihydrochalcone) from aqueous solutions. The influence of several types of LC-MS compatible buffers (different pH values and compositions) on their recovery has been studied and discussed. A number of commercially available SPE cartridges, such as Chromabond C18ec, Strata-X RP, Bakerbond Octadecyl, Bakerbond SDB-1, Bakerbond SPE Phenyl, Oasis HLB, LiChrolut RP-18, Supelclean LC-18, Discovery DSC-18 and Zorbax C18 were tested in order to evaluate their applicability for the isolation of analytes. Very high recoveries (better than 92%) of all studied compounds were obtained using formic acid-N,N-diisopropylethylamine buffer adjusted to pH 4.5 and C₁₈-bonded silica sorbents. Behaviour of polymeric sorbents strongly depends on their structure. Strata-X RP behaves much like a C₁₈-bonded silica sorbent. Recoveries obtained using Oasis HLB were comparable with those observed for silica-based sorbents. The only compound less efficiently (83%) retained by this sorbent was cyclamate. Bakerbond SDB-1 shows unusual selectivity towards aspartame and alitame. Recoveries of these two sweeteners were very low (26 and 42%, respectively). It was also found that aspartame and alitame can be selectively separated from the mixture of sweeteners using formic acid-triethylamine buffer at pH 3.5.     

Improvement of the Water Resistance of a Narrow‐Band Red‐Emitting SrLiAl3N4:Eu2+ Phosphor Synthesized under High Isostatic Pressure through Coating with an Organosilica Layer

A SrLiAl₃N₄:Eu²⁺ (SLA) red phosphor prepared through a high‐pressure solid‐state reaction was coated with an organosilica layer with a thickness of 400–600 nm to improve its water resistance. The observed 4f⁶5d→4f⁷ transition bands are thought to result from the existence of Eu²⁺ at two different Sr²⁺ sites. Luminescence spectra at 10 K revealed two zero‐phonon lines at 15377 (for Eu(Sr1)) and 15780 cm^?1 (for Eu(Sr2)). The phosphor exhibited stable red emission under high pressure up to 312 kbar. The configurational coordinate diagram gave a theoretical explanation for the Eu^2+/3+ result. The coated samples showed excellent moisture resistance while retaining an external quantum efficiency (EQE) of 70 % of their initial EQE after aging for 5 days under harsh conditions. White‐light‐emitting diodes of the SLA red phosphor and a commercial Y₃Al₅O₁₂:Ce³⁺ yellow phosphor on a blue InGaN chip showed high color rendition (CRI=89, R9=69) and a low correlated color temperature of 2406 K.     

Stability of 47Sc-complexes with acyclic polyamino-polycarboxylate ligands

The aim of this study was to evaluate acyclic ligands which can be applied for labeling proteins such as monoclonal antibodies and their fragments with scandium radionuclides. Recently, scandium isotopes (⁴⁷Sc, ⁴⁴Sc) are more available and their properties are convenient for radiotherapy or PET imaging. They can be used together as “matched pair” in theranostic approach. Because proteins denaturize at temperature above 42 °C, ligands which efficiently form complexes at room temperature, are necessary for labelling such biomolecules. For complexation of scandium radionuclides open chain ligands DTPA, HBED, BAPTA, EGTA, TTHA and deferoxamine have been chosen. We found that the ligands studied (except HBED) form strong complexes within 10 min and that the radiolabelling yield varies between 96 and 99 %. The complexes were stable in isotonic NaCl, but stability of ⁴⁶Sc-TTHA, ⁴⁶Sc-BAPTA and ⁴⁶Sc-HBED in PBS buffer was low, due to formation by Sc³⁺stronger complexes with phosphates than with the studied ligands. From the radiolabelling studies with n.c.a. ⁴⁷Sc we can conclude that the most stable complexes are formed by the 8-dentate DTPA and EGTA ligands.     

Helicenophyrins: Expanded Carbaporphyrins Incorporating Aza[5]helicene and Heptacyclic S‐Shaped Aza[5]helicene Motifs

Incorporation of phenanthrene into a hexaphyrin(1.1.1.1.1.0) frame resulted in intramolecular ring fusion, thus giving rise to chiral helicenophyrins. These molecules contain helicene and porphyrin features by incorporating either an aza[5]helicene or heptacyclic S‐shaped aza[5]helicene.     

Metal(II) Ion Complexes with 5‐(Pyrazin‐2‐yl)‐2,4‐dihydro‐3H‐1,2,4‐triazole‐3‐thione; Synthesis,Structural Characterization,Acid‐base,and Complexing Properties in Solution

The study reports the synthesis of complexes Co(HL)Cl₂ ( 1 ), Ni(HL)Cl₂ ( 2 ), Cu(HL)Cl₂ ( 3 ), and Zn(HL)₃Cl₂ ( 4 ) with the title ligand, 5‐(pyrazin‐2‐yl)‐1,2,4‐triazole‐5‐thione (HL), and their characterization by elemental analyses, ESI‐MS (m/z), FT‐IR and UV/Vis spectroscopy, as well as EPR in the case of the Cu^II complex. The comparative analysis of IR spectra of the metal ion complexes with HL and HL alone indicated that the metal ions in 1 , 2 , and 3 are chelated by two nitrogen atoms, N(4) of pyrazine and N(5) of triazole in the thiol tautomeric form, whereas the Zn^II ion in 4 is coordinated by the non‐protonated N(2) nitrogen atom of triazole in the thione form. pH potentiometry and UV/Vis spectroscopy were used to examine Co^II, Ni^II, and Zn^II complexes in 10/90 (v/v) DMSO/water solution, whereas the Cu^II complex was examined in 40/60 (v/v) DMSO/water solution. Monodeprotonation of the thione triazole in solution enables the formation of the L:M = 1:1 species with Co^II, Ni^II and Zn^II, the 2:1 species with Co^II and Zn^II, and the 3:1 species with Zn^II. A distorted tetrahedral arrangement of the Cu^II complex was suggested on the basis of EPR and Vis/NIR spectra.     

Effect of composition and drying method on glass transition temperature,water sorption characteristics and surface morphology of newly designed β-lactoglobulin/retinyl palmitate/disaccharides systems

Epoxy-based nanocomposites containing different concentrations (0–3%) of surface-modified graphene nanosheets (GNS) with 3-aminopropyltriethoxysilane were prepared and their thermal and mechanical properties including dynamic mechanical analysis, tensile strength, hardness, and abrasion tests were evaluated in order to have a database for thermo-mechanical properties of epoxy nanocomposites. The main aim of this study was to understand the optimum percentage of GNS which would perform the best reinforcing influence on mechanical and physical performance of an epoxy nanocomposite. The results explain how applying the analysis of variance (ANOVA) method as a useful tool in optimization of GNS concentration in preparation of high-performance epoxy-based nanocomposites.     

Formation of Intermediate Layers for Immobilization of Biomacromolecules by Self‐Assembling and Reduction of Phenyldiazonium Salts. A Comparative Study

Two types of biomolecules were tested in the comparison of usefulness of two ways of formation of the intermediate layers at electrodes: a 20‐nucleotide DNA sequence and glucose oxidase. Chronocoulometric, amperometric, electrochemical impedance and PM‐IRRAS experiments proved that the layers obtained by electroreduction of diazonium salts are much more stable and more efficient in the accumulation of biomolecules compared to layers obtained by self‐assembling of appropriate thiols.     

Determination of nonsteroidal antiinflammatory drugs in water samples using liquid chromatography coupled with diode-array detector and mass spectrometry

An analytical method for the determination of trace levels of six different nonsteroidal antiinflammatory drugs (NSAIDs) in water samples has been developed and validated. Environmentally relevant pharmaceuticals were chosen according to human consumption in Poland. Final analysis of the target compounds was performed by RP LC-diode-array detection-MS, whereas sample preparation included an SPE step. For this SPE step, a number of packing materials, such as LiChrolut RP-18, calixarene, Strata-X, BAKERBOND Narc-2, BAKERBOND Polar Plus, BAKERBOND styrene divinylbenzene-1, and Discovery DSC-18, were used, and their respective advantages and disadvantages in this study were discussed. The RP-18 phase was found to be the most retentive for all analytes. The detection limits for compounds in surface waters were varied from 0.005 for diflunisal to 0.095 microg/L for ibuprofen. The average recoveries of NSAIDs from the surface water samples ranged from 80 up to 103%. RSD value is relatively low (from 4% for fenoprofen up to 8% for ibuprofen). The performance of the method was tested with several environmental water samples.