Homolytic displacement at carbon: XI. Intramolecular homolytic displacement as a route to cyclopentane and tetrahydrofuran derivatives from hex-5-enyl- andhex-3-oxo-5-enylcobaloximes

5-Methylhex-5-enylcobaloxime reacts with carbon tetrachloride and with fluorotrichloromethane at 80–100°C to give substantially pure 1-methyl-1-(β,β,β-trichloroethyl)- and 1-methyl-1-β-fluoro-β,β-dichloroethyl)-cyclopentane. Hex-5-enylco-baloxime also gives trichloroethylcyclopentane from carbon tetrachloride, but the yield is dependent on the concentration of carbon tetrachloride. Similar cyclisation to give trichloroethyl- or fluorodichloroethyltetrahydrofuran is observed in the reactions of hex-3-oxo-5-enylcobaloxime with carbon tetrachloride and fluorotrichloromethane. However, no cyclisation was observed in the reactions of the ester, hex-2-one-3-oxo-5-enylcobaloxime, with carbon tetrachloride. These reactions are believed to take place by attack of a polyhalogenomethyl radical at the terminal unsaturated carbon of the organic ligand, followed either by an intramolecular homolytic displacement in which the carbon radical at position-5 attacks carbon-1 with displacement of cobaloxime(II), or by a halogen atom abstraction.     

Regio- and stereoselective synthesis of Nor-nonactinic acid derivatives--kinetic reaction control in the Lewis acid mediated domino reaction of 1,3-dicarbonyl dianions with 1-bromo-2,3-epoxypropanes

Reaction of 1,3-dicarbonyl dianions with epibromohydrin derivatives results in formation of functionalized 2-alkylidene-5-hydroxymethyltetrahydrofurans. These reactions proceed by chemoselective attack of the dianion onto the carbon attached to the bromine atom and subsequent nucleophilic attack of the resultant monoanion onto the epoxide. The cyclization products, which were formed with very good regio- and stereoselectivities, are of pharmacological relevance and represent versatile building blocks for the synthesis of natural products.     

Comment: 2004's fastest organic and biomolecular chemistry!

In January 2003, the Royal Society of Chemistry launched Organic & Biomolecular Chemistry (OBC)--a journal promising to provide high quality research from all aspects of synthetic, physical and biomolecular organic chemistry. The journal was set to build upon the foundations laid down by its predecessor publications (J. Chem. Soc., Perkin Trans. 1 and J. Chem. Soc., Perkin Trans. 2) as well as complement the subject coverage already published in prestigious general chemistry journals such as Chemical Communications and Chemical Society Reviews. Nearly two years on, just how is the programme developing and what can the community expect to see from the Royal Society of Chemistry (RSC)?     

Cell docking inside microwells within reversibly sealed microfluidic channels for fabricating multiphenotype cell arrays

We present a soft lithographic method to fabricate multiphenotype cell arrays by capturing cells within an array of reversibly sealed microfluidic channels. The technique uses reversible sealing of elastomeric polydimethylsiloxane (PDMS) molds on surfaces to sequentially deliver various fluids or cells onto specific locations on a substrate. Microwells on the substrate were used to capture and immobilize cells within low shear stress regions inside channels. By using an array of channels it was possible to deposit multiple cell types, such as hepatocytes, fibroblasts, and embryonic stem cells, on the substrates. Upon formation of the cell arrays on the substrate, the PDMS mold could be removed, generating a multiphenotype array of cells. In addition, the orthogonal alignment and subsequent attachment of a secondary array of channels on the patterned substrates could be used to deliver fluids to the patterned cells. The ability to position many cell types on particular regions within a two dimensional substrate could potentially lead to improved high-throughput methods applicable to drug screening and tissue engineering.     

Reaction of N-phenyl maleimide with aminosilane monolayers

Reaction of N-phenyl maleimide (NPM) with silica surfaces modified with a self-assembled monolayer of (aminopropyl)triethoxysilane (APTES) was investigated using infrared spectroscopy (FTIR), elemental analysis, and titration assays. This reaction is of interest as a test case for using amine-maleimide coupling for immobilization of biomolecules. Addition of NPM to surface APTES residues was consistently sub-stoichiometric, with typical yields of about 75% on monolayers with a coverage of 1.15 APTES residues/nm2. Titration analysis found negligible presence of imide alkene C=C bonds in modified supports, indicating that addition of NPM to APTES proceeded via amine attack at the imide olefinic bond. FTIR measurements also revealed presence of amide bands which intensified over periods of 10 h. These observations were attributed to a slower secondary process in which APTES amines attack imide carbonyls to produce amide linkages. Stability of NPM-modified surfaces was examined under room temperature storage in pH 7 buffer up to 72 h and for 2 h exposure to buffer at temperatures up to 90 degrees C. It was found that stability was determined by robustness of APTES-silica attachment, with about 30% loss under the harshest conditions investigated.     

Substitution reactions of [Fe(4)S(4)Cl(4)](2-) with Bu(t)NC or Et(2)NCS(2)(-): trapping intermediates and detecting new pathways

Kinetic studies on the substitution reaction between [Fe(4)S(4)Cl(4)](2-) and Bu(t)NC or Et(2)NCS(2)(-) are reported. The binding of small molecules and ions to Fe-S clusters is a fundamental step in substitution reactions but can be difficult to follow directly because these reactions are rapid and often associated with small spectroscopic changes. A novel kinetic method is reported which allows the time course of molecule and ion binding to Fe-S clusters to be followed by monitoring the lability of the cluster. Using a stopped-flow, sequential-mix apparatus, [Fe(4)S(4)Cl(4)](2-) and L (L = Et(2)NCS(2)(-) or Bu(t)NC) are rapidly mixed, and after a known time (delta) the resulting solution is mixed with a solution of PhS(-). The thiolate substitutes for the chloro ligands on the cluster, in a reaction which is easy to follow because of the large change in the visible absorption spectrum. The rate of this substitution is extremely sensitive to whether L is bound to the cluster or not. By correlation of delta with the rate of the reaction with PhS(-), the time course of the reaction between [Fe(4)S(4)Cl(4)](2-) and L can be mapped out. In studies where L = Bu(t)NC this technique has allowed the detection of an intermediate ([Fe(4)S(4)Cl(4)(CNBu(t))](2-)) which cannot be detected spectrophotometrically. In further studies, the substitution reactions of [Fe(4)S(4)Cl(4)](2-) with PhS(-), Et(2)NCS(2)(-), or Bu(t)NC are all perturbed by the addition of Cl(-). In all cases a common pathway for substitution is evident, but with Et(2)NCS(2)(-) an additional, slower pathway becomes apparent under conditions where the common pathway is completely inhibited by Cl(-).     

Synthesis of 3-hexahelicenol and its transformation to 3-hexahelicenylamines,diphenylphosphine, methyl carboxylate,and dimethylthiocarbamate

A nonphotochemical synthetic route to 3-hexahelicenol is reported. It involves a key [2+2+2] cycloisomerization of CH(3)O-substituted triyne that is readily available from 1-methoxy-3-methylbenzene and 1-bromo-2-(bromomethyl)naphthalene. Further functional group transformations led to 3-CO(2)CH(3), 3-NH(2), 3-PPh(2), and 3-SC(O)N(CH(3))(2) substituted hexahelicenes.     

Metallocycle synthesis accelerated by high pressure

Reaction of cis-[FeH₂(dmpe)₂](1) with diphenylbutadiyne results in an insertion into both of the iron-hydride bonds to form an iron metallocycle. Spectroscopic and crystallographic data of [Fe(PhHCC₂CHPh)(dmpe)₂] (3) show 1,4-diphenylbutatriene is symmetrically bound to the metal via the central double bond. The reaction to form the metallocyclic complex is greatly accelerated by application of external pressure. A 41% yield of (3) is isolated after two days at atmospheric pressure or after approximately 75 min at 800MPa.     

Polystyrene nanoparticles based on poly(butyl methacrylate-g-methoxypoly(ethylene glycol)) and poly(methyl methacrylate-g-methoxypoly(ethylene glycol)) graft copolymers

The solubilization of styrene by poly(butyl methacrylate-g-methoxypoly(ethylene glycol)) and poly(methyl methacrylate-g-methoxypoly(ethylene glycol)) graft copolymers has been examined. From turbidity measurements the solubility limit of the monomer in the micelles was obtained and the distribution coefficients were evaluated. Dynamic light scattering revealed that below the solubility limit, solubilization leads to a slight increase in micelle size, while above the solubility limit, there is a dramatic increase in particle size and turbidity as oil-in-water emulsions are formed through coalescence of monomer-swollen micelles. Polymerizations carried out below the solubility limit using the graft copolymer micelles as templates resembled microemulsion polymerizations in nature and led to very fine sterically stabilized polystyrene latex particles. Through careful control of the monomer concentration and the polymerization temperature it was possible to obtain spherical nanosize latex particles with similar size to those of the micelle precursors (10 nm) up to 11% monomer by weight. Polymerizations above the solubility limit, on the other hand, showed similarities with emulsion polymerizations and resulted in larger particles with higher polydispersity.