Reaction of N-phenyl maleimide with aminosilane monolayers

Reaction of N-phenyl maleimide (NPM) with silica surfaces modified with a self-assembled monolayer of (aminopropyl)triethoxysilane (APTES) was investigated using infrared spectroscopy (FTIR), elemental analysis, and titration assays. This reaction is of interest as a test case for using amine-maleimide coupling for immobilization of biomolecules. Addition of NPM to surface APTES residues was consistently sub-stoichiometric, with typical yields of about 75% on monolayers with a coverage of 1.15 APTES residues/nm2. Titration analysis found negligible presence of imide alkene C=C bonds in modified supports, indicating that addition of NPM to APTES proceeded via amine attack at the imide olefinic bond. FTIR measurements also revealed presence of amide bands which intensified over periods of 10 h. These observations were attributed to a slower secondary process in which APTES amines attack imide carbonyls to produce amide linkages. Stability of NPM-modified surfaces was examined under room temperature storage in pH 7 buffer up to 72 h and for 2 h exposure to buffer at temperatures up to 90 degrees C. It was found that stability was determined by robustness of APTES-silica attachment, with about 30% loss under the harshest conditions investigated.     

Substitution reactions of [Fe(4)S(4)Cl(4)](2-) with Bu(t)NC or Et(2)NCS(2)(-): trapping intermediates and detecting new pathways

Kinetic studies on the substitution reaction between [Fe(4)S(4)Cl(4)](2-) and Bu(t)NC or Et(2)NCS(2)(-) are reported. The binding of small molecules and ions to Fe-S clusters is a fundamental step in substitution reactions but can be difficult to follow directly because these reactions are rapid and often associated with small spectroscopic changes. A novel kinetic method is reported which allows the time course of molecule and ion binding to Fe-S clusters to be followed by monitoring the lability of the cluster. Using a stopped-flow, sequential-mix apparatus, [Fe(4)S(4)Cl(4)](2-) and L (L = Et(2)NCS(2)(-) or Bu(t)NC) are rapidly mixed, and after a known time (delta) the resulting solution is mixed with a solution of PhS(-). The thiolate substitutes for the chloro ligands on the cluster, in a reaction which is easy to follow because of the large change in the visible absorption spectrum. The rate of this substitution is extremely sensitive to whether L is bound to the cluster or not. By correlation of delta with the rate of the reaction with PhS(-), the time course of the reaction between [Fe(4)S(4)Cl(4)](2-) and L can be mapped out. In studies where L = Bu(t)NC this technique has allowed the detection of an intermediate ([Fe(4)S(4)Cl(4)(CNBu(t))](2-)) which cannot be detected spectrophotometrically. In further studies, the substitution reactions of [Fe(4)S(4)Cl(4)](2-) with PhS(-), Et(2)NCS(2)(-), or Bu(t)NC are all perturbed by the addition of Cl(-). In all cases a common pathway for substitution is evident, but with Et(2)NCS(2)(-) an additional, slower pathway becomes apparent under conditions where the common pathway is completely inhibited by Cl(-).     

Synthesis of 3-hexahelicenol and its transformation to 3-hexahelicenylamines,diphenylphosphine, methyl carboxylate,and dimethylthiocarbamate

A nonphotochemical synthetic route to 3-hexahelicenol is reported. It involves a key [2+2+2] cycloisomerization of CH(3)O-substituted triyne that is readily available from 1-methoxy-3-methylbenzene and 1-bromo-2-(bromomethyl)naphthalene. Further functional group transformations led to 3-CO(2)CH(3), 3-NH(2), 3-PPh(2), and 3-SC(O)N(CH(3))(2) substituted hexahelicenes.     

Metallocycle synthesis accelerated by high pressure

Reaction of cis-[FeH₂(dmpe)₂](1) with diphenylbutadiyne results in an insertion into both of the iron-hydride bonds to form an iron metallocycle. Spectroscopic and crystallographic data of [Fe(PhHCC₂CHPh)(dmpe)₂] (3) show 1,4-diphenylbutatriene is symmetrically bound to the metal via the central double bond. The reaction to form the metallocyclic complex is greatly accelerated by application of external pressure. A 41% yield of (3) is isolated after two days at atmospheric pressure or after approximately 75 min at 800MPa.     

Polystyrene nanoparticles based on poly(butyl methacrylate-g-methoxypoly(ethylene glycol)) and poly(methyl methacrylate-g-methoxypoly(ethylene glycol)) graft copolymers

The solubilization of styrene by poly(butyl methacrylate-g-methoxypoly(ethylene glycol)) and poly(methyl methacrylate-g-methoxypoly(ethylene glycol)) graft copolymers has been examined. From turbidity measurements the solubility limit of the monomer in the micelles was obtained and the distribution coefficients were evaluated. Dynamic light scattering revealed that below the solubility limit, solubilization leads to a slight increase in micelle size, while above the solubility limit, there is a dramatic increase in particle size and turbidity as oil-in-water emulsions are formed through coalescence of monomer-swollen micelles. Polymerizations carried out below the solubility limit using the graft copolymer micelles as templates resembled microemulsion polymerizations in nature and led to very fine sterically stabilized polystyrene latex particles. Through careful control of the monomer concentration and the polymerization temperature it was possible to obtain spherical nanosize latex particles with similar size to those of the micelle precursors (10 nm) up to 11% monomer by weight. Polymerizations above the solubility limit, on the other hand, showed similarities with emulsion polymerizations and resulted in larger particles with higher polydispersity.     

Comment: 2004's fastest organic and biomolecular chemistry!

In January 2004, the Royal Society of Chemistry launched Organic & Biomolecular Chemistry (OBC) - a journal promising to provide high quality research from all aspects of synthetic, physical and biomolecular organic chemistry. The journal was set to build upon the foundations laid down by its predecessor publications (J. Chem. Soc., Perkin Trans. 1 and J. Chem. Soc., Perkin Trans. 2) as well as complement the subject coverage already published in prestigious general chemistry journals such as Chemical Communications and Chemical Society Reviews. Nearly two years on, just how is the programme developing and what can the community expect to see from the Royal Society of Chemistry (RSC)?     

Controlled peak wavelength shift of Ca1−xSrx(SySe1−y):Eu phosphor for LED application

The highly efficient red-orange-yellow-emitting phosphor (Ca_1−xSr_x)(S_1−ySe_y):Eu²⁺ in combination with commercial green phosphor SrGa₂S₄:Eu²⁺ and blue LED are proposed for a three-band white LED. The luminescence mechanism and optimization parameters are discussed on the basis of proposed peak wavelength diagram.     

Helicity‐Encoded Molecular Strands: Efficient Access by the Hydrazone Route and Structural Features

Control over the folding of molecular strands may be achieved by appropriate choice of the constituting subunits, in particular for chains of specific heterocycles such as sequences of directly connected pyridine (py) and pyrimidine (pym) rings, which are known to fold into extended helical structures. Since the hydrazone (hyz) group represents an isomorphic analogue of a py site, the condensation of hydrazine and carboxaldehyde derivatives of pym offers a very efficient approach to strands incorporating hyz instead of py units and constituted by sequences of alternating hyz and pym groups. A series of such strands of different lengths, up to ten hyz units, i.e., 1 – 7 , were synthesized. Their spectral properties indicate that they fold indeed into helical shapes. Extensive characterization was performed in solution by ¹HNMR spectroscopy and in the solid state by determination of the crystal structures of eight such strands. They all display the expected helical geometry with up to 3 ¹/₃ turns and direct stacking contacts. The efficiency and flexibility of the synthetic approach as well as its wide potential for generation of diversity through lateral decoration make the (hyz? pym) subunit a particularly attractive helicity codon.     

Maximum overlap symmetry molecular orbital model

This paper provides a brief and systematic presentation of the basic principle and method of the maximum overlap symmetry molecular orbital (MOSMO ) model and its application to simplification of molecular orbital calculation and to calculation of molecular structures and properties, together with some new results about the MOSMO calculation and new insights concerning the further extension of the principle and method. It has been shown that the theoretical method of the MOSMO model is very simple, reliable, and useful and can be employed to study the structure–property relation in even very large molecular systems. The numerical results obtained from the MOSMO calculation on various semiempirical molecular orbital approximation levels show that when the same parametrization, such as one of those employed in EHMO , CNDO /2, and HMO methods, is adopted, the MOSMOS are very close to the canonical molecular orbitals obtained from the customary LCAO method and the MOSMO calculation requires less computing time than does the LCAO method. The MOSMO calculation can be used for rapidly obtaining reasonably good molecular geometries, vibrational frequencies, and other properties of molecules by employing a simple improved semiempirical parametrization. Equilibrium geometries, vibrational frequencies, and other results are in good agreement with the experimental data and the results obtained from ab initio molecular orbital calculation. The basic calculational procedure of the MOSMO model can be extended further and has been employed to give some new results, to propose some new theoretical schemes and principles, and to introduce some new interesting theoretical problems that deserve to be studied further.     

Reversible $$G^k$$ G k -codes with applications to DNA codes

Designs, Codes and Cryptography - In this paper, we give a matrix construction method for designing DNA codes that come from group matrix rings. We show that with our construction one can obtain...