Flow-injection single-point titration of acids with biamperometric detection at polarized platinum electrodes

Flow-injection single-point titration of acids is based on biamperometric measurement of iodine formed quantitatively in the reaction of iodide with iodate. Results are presented for determination of sulphuric, hydrofluoric, monochloroacetic, formic and acetic acids. The slopes of the calibration plots, which are linear for about 1–10 rum acid, depend on the strength of the acid, decreasing from sulphuric acid to acetic acid. With microcomputer on-line data processing, relative standard deviations were about 0.2%.     

Technological quality determination of pharmaceutical disintegrant by DSC cooling and DSC photovisual

A number of disintegrants are available on the market. They improve tablets’ disintegration. The objective of this work is the comparison of the technological quality parameters of disintegrants using different analytical techniques. Three batches of disintegrants and their binary mixtures (water:disintegrants) were investigated. Cooling experiments were used from –30 up to 200°C. The data obtained showed calorimetric differences between the samples. In the binary mixtures water showed different crystallization behaviour from the one found in the literature. According to the results DSC technique helped the quality control of different disintegrants.     

Thermodynamic characterization of different actin isoforms

Summary The thermodynamic properties of the cardiac and skeletal a-actin isoforms were studied to characterize the molecular bases of the functional differences between them with the method of differential scanning calorimetry (DSC). The thermal properties of the actin filaments were described in the presence of calcium and magnesium ions as well. Based on the calculated free energy changes the α-cardiac actin filaments appeared to be more stable in its physiologically more relevant, magnesium saturated form. The magnesium saturated form of the α-cardiac actin filaments seemed to be more stable compared to the calcium saturated form of it. The enthalpy and entropy changes could differentiate between the α-cardiac and α-skeletal actin isoforms and between the calcium and magnesium saturated cardiac actin isoforms as well. Our results can demonstrate that the few differences between the amino acid sequences of the α-actin isoforms have an influence on the thermal properties and maybe on the function of these proteins as well.     

Highly efficient, one-step macrocyclizations assisted by the folding and preorganization of precursor oligomers

Highly efficient, one-step macrocyclizations leading to the formation of macrocyclic hexa(aramides) in high yields (69-82%) are described. The one-step macrocyclizations were facilitated by the preorganization or folding of the backbones of uncyclized precursors in the course of macrocyclization. The preorganization of backbones was achieved by the presence of localized three-centered hydrogen bonds that were adopted in the design of a class of closely related, backbone-rigidified foldamers. The macrocyclization involved reactions between diacid chloride 1 and diamine 2. The crude reaction mixtures and products were conveniently examined by mass spectrometric method (MALDI-TOF). Compared to most traditional one-step macrocyclizations that usually require high dilution conditions and often lead to very low overall yields of the desired products, cyclic hexamers 3 were obtained as the overwhelmingly major product under a variety of reaction conditions, suggesting the generality of this approach.     

Side effects in measurements of selectivity coefficients of solid state ion selective electrodes

The influence of various factors such as solubility, the oxidation of the membrane, and the contamination of the solution, on the experimental values of the selectivity coefficients of solid state sulphide ion selective electrodes is discussed. A new method for the evaluation of very small selectivity coefficients, based on the addition of reagents forming complexes or insoluble salts with the main ion, is proposed. By means of this method, selectivity coefficients for silver, copper, cadmium and lead ion selective electrodes have been determined, which are in far better agreement with thermodynamic values than those described in the literature.     

Synthesis and some properties of poly-(2,5-trimethylene benzimidazole) and poly-(2,5-trimethylene benzimidazole hydrochloride)

A polymer, poly(2,5-trimethylene benzimidazole), the first of a new family of nonsymmetrical polymers, was synthesized via an eight-step synthetic route. The polymer, obtained by melt polymerization, is amorphous and in its neutral form behaves as a moderate insulator. It forms 1 : 1 HCl adducts. When cast from formic acid solution, it forms 1 : 1 formic acid adducts. The acid adducts are semiconductors with resistivities in the 10⁶–10⁸ ohm-cm range. Space-charge effects are generated in the adducts as carrier mobility rises.     

Molecular basis for antifreeze activity difference of two insect antifreeze protein isoforms

The insect spruce budworm(Choristoneura fumiferana) produces antifreeze protein(AFP) to assist in the protection of the over-wintering larval stage and contains multiple isoforms. Structures for two isoforms,known as CfAFP-501 and CfAFP-337,show that both possess similar left-handed β-helical structure,although thermal hysteresis activity of the longer isoform CfAFP-501 is three times that of CfAFP-337. The markedly enhanced activity of CfAFP-501 is not proportional to,and cannot be simply accounted for,by the increased ice-binding site resulting from the two extra coils in CfAFP-501. In or-der to investigate the molecular basis for the activity difference and gain better understanding of AFPs in general,we have employed several different computational methods to systematically study the structural properties and ice interactions of the AFPs and their deletion models. In the context of intact AFPs,a majority of the coils in CfAFP-501 has better ice interaction and causes stronger ice lattice disruption than CfAFP-337,strongly suggesting a cooperative or synergistic effect among β-helical coils. The synergistic effect would play a critical role and make significant contributions to the anti-freeze activity β-helical antifreeze proteins. This is the first time that synergistic effect and its implica-tion for antifreeze activity are reported for β-helical antifreeze proteins.     

Do proficiency tests always verify laboratories’ performance? The case of FAPAS PT 0270

In this paper, the case of FAPAS PT 0270 “Doramectin and Oxfendazole in Sheep Liver” is discussed. During evaluation of the data received from participants (determination of total, oxidised oxfendazole residue and calculation of the sum of oxfendazole and oxfendazole sulfone residues), significant differences were observed between the results obtained by use of two analytical approaches. This phenomenon can be explained by the route of oxfendazole metabolism, which results in the presence of fenbendazole in the sample. This was not predicted by the provider; consequently, not all the necessary tests on the material were conducted. Due to the high uncertainty of the z-scores in this test, the results of the PT cannot be used for purposes of evaluation, and the benefits of participation in PT 0270 are questionable.     

Micellar ultrafiltration preconcentration of strontium by anionic micellar solution

Th anionic micellar system of the sodium dodecylsulphate (SDS) with di-2-ethylhexylphosphoric acid (D2EHPA) chelating ligand reagent in acctate buffer solutions was studied. The influence of the concentration and the composition of the micellar system for strontium preconcentration was determined. Different pH values of solutions as well as different concentration ratios of the ligand to the surfactant were used.     

Calculations of substituent and solvent effects on the kinetic isotope effects of Menshutkin reactions

Nitrogen, deuterium, halogen, and carbon kinetic isotope effects have been modeled for the Menshutkin reaction between methyl halides and substituted N,N-dimethylaniline at the HF/6-31G(d) level of theory augmented by the C-PCM continuum solvent model for several solvents. Systematic changes in geometries of the transition states and Gibbs free energies of activation have been found with phenyl ring substituents, solvent, and the leaving group. Kinetic isotope effects also change systematically; however, these changes are predicted to be small, inside the usual precision of the experimental measurements. On the contrary, no correlation has been found between the kinetic isotope effects and the Hammett constants for para substituents. Thus opposite to previous assumptions, our results indicate that kinetic isotope effects on the Menshutkin reaction cannot be used to predict the position of the transition state on the reaction coordinate.