Preliminary investigation into feasibility of dissolved methane measurement using cavity ringdown spectroscopy technique

For the exploration of gas hydrate resources by measuring the dissolved methane concentration in seawater, a continuous-wave cavity ringdown spectroscopy (CW-CRDS) experimental setup was constructed for trace methane detection. A current-modulation method, rather than a cavity-modulation method using an optical switch and a piezoelectric transducer, was employed to realize the cavity excitation and shutoff. Such a current-modulation method enabled the improvement of the experimental setup construction and stability, and the system size and stability are critical for a sensor to be deployed underwater. Ringdown data acquisition and processing were performed, followed by an evaluation of the experimental setup stability and sensitivity. The obtained results demonstrate that great errors are introduced when a large fitting window is selected if the analog-to-digital converter has an insufficient resolution. The ringdown spectrum of methane corresponding to the 2v ₃ band R(4) branch was captured, and the methane concentration in lab air was determined to be 2.06 ppm. Further experiments for evaluating the quantitative ability of this CW-CRDS experimental setup are underway from which a high-sensitivity methane sensor that can be combined with a degassing system is expected.     

Viscosity,heat conductivity,and Prandtl number effects in the Rayleigh–Taylor Instability

The two-dimensional Rayleigh–Taylor instability problem is simulated with a multiple-relaxation-time discrete Boltzmann model with a gravity term. Viscosity, heat conductivity, and Prandtl number effects are probed from macroscopic and nonequilibrium viewpoints. In the macro sense, both viscosity and heat conduction show a significant inhibitory effect in the reacceleration stage, which is mainly achieved by inhibiting the development of the Kelvin–Helmholtz instability. Before this, the Prandtl number effect is not sensitive. Viscosity, heat conductivity, and Prandtl number effects on nonequilibrium manifestations and the degree of correlation between the nonuniformity and the nonequilibrium strength in the complex flow are systematically investigated.     

Laser-induced breakdown spectroscopy in Asia

Laser-induced breakdown spectroscopy (LIBS) is an analytical detection technique based on atomic emission spectroscopy to measure the elemental composition. LIBS has been extensively studied and developed due to the non-contact, fast response, high sensitivity, real-time and multi-elemental detection features. The development and applications of LIBS technique in Asia are summarized and discussed in this review paper. The researchers in Asia work on different aspects of the LIBS study in fundamentals, data processing and modeling, applications and instrumentations. According to the current research status, the challenges, opportunities and further development of LIBS technique in Asia are also evaluated to promote LIBS research and its applications.     

Synthesis and characterization of spinel LiMn<Subscript>2</Subscript>O<Subscript>4</Subscript> nanoparticles prepared by high-energy milling and hydrothermal method

Spinel LiMn₂O₄ has been known to be a technologically important, environmental-friendly, and low-cost cathode material used in Li-based rechargeable batteries, and it is also widely available. Nanoparticle spinel LiMn₂O₄ has been synthesized by the top-down, high-energy milling, and hydrothermal methods. SEM images, X-ray diffraction patterns, and neutron high-resolution powder diffraction patterns have confirmed the nanocrystalline nature of the spinel LiMn₂O₄ samples. Raman and Fourier transform infrared (FTIR) measurements show typical absorption and vibration spectra typical for the spinel LiMn₂O₄ showing the formation of various metallic bonds in the sample. The strongest Raman and FTIR signals come from the higher frequency region, with weaker signals appearing in the lower frequency range.     

Porous WO<Subscript>3</Subscript>/reduced graphene oxide composite film with enhanced electrochromic properties

The porous WO₃/reduced graphene oxide (rGO) composite films are prepared on indium–tin oxide (ITO) glass by sol-gel method. The mixture sol combines peroxotungstic acid solution with rGO dispersion reduced by ethylene glycol (EG). The excessive EG and other organic additives are subsequently removed by annealing, which leads to the formation of porous structure. Compared with pure WO₃ film, WO₃/rGO composite film shows improved electrochromic performance because of enhanced double insertion/extraction of ions and electrons. It realizes a large optical modulation (64.2 % at 633 nm), fast switching speed (9.5 s for coloration and 4.5 s for bleaching), good cycling stability as well as reversibility.     

Preparation and characterization of biodegradable poly(ε-caprolactone)-based gel polymer electrolyte films

Biodegradable polymer electrolyte films based on poly(ε-caprolactone) (PCL) in conjunction with lithium tetrafluoroborate (LiBF₄) salt and 1-ethyl-3-methylimidazolium tetrafluoroborate (EMIMBF₄) ionic liquid were prepared by solution cast technique. The structural, morphological, thermal, and electrical properties of these films were examined using X-ray diffraction (XRD), optical microscopy (OM), differential scanning calorimetry (DSC), and impedance spectroscopy. The XRD and OM results reveal that the pure PCL possesses a semi-crystalline nature and its degree of crystallinity decreases with the addition of LiBF₄ salt and EMIMBF₄ ionic liquid. DSC analysis indicates that the melting temperature and enthalpy are apparently lower for the 40 wt% EMIMBF₄ gel polymer electrolyte as compared with the others. The ambient temperature electrical conductivity increases with increasing EMIMBF₄ concentration and reaches a high value of ～2.83?×?10^?4 S cm^?1 for the 85 PCL:15 LiBF₄ + 40 wt% EMIMBF₄ gel polymer electrolyte. The dielectric constant and ionic conductivity follow the same trend with increasing EMIMBF₄ concentration. The dominant conducting species in the 40 wt% EMIMBF₄ gel polymer electrolyte determined by Wagner’s polarization technique are ions. The ionic conductivity of this polymer electrolyte (～2.83?×?10^?4 S cm^?1) should be high enough for practical applications.     

Selective response of DPPV/zeolite composites toward acetone,methanol, and n-heptane vapors

In this work, doped poly(p-phenylene vinylene)/zeolite composites was prepared to detect the three different chemical vapors (acetone, methanol, and n-heptane) and to investigate the effects of zeolite type, chemical vapor type, and vapor concentration based on the electrical conductivity response and selectivity properties of the sensing materials. Before blending with PPV, zeolite Y (Si/Al?=?5.1 and Na⁺), mordenite (Si/Al?=?18 and Na⁺), and 5A (LTA) (Si/Al?=?1.0 and Na⁺) were ion exchanged with Cu²⁺ at 80 % ion exchanged to prepare 80CuNaY, 80CuNaMOR, and 80CuNa5A. 80CuNaY exhibited the highest electrical conductivity response under acetone and methanol exposures while 80CuNaMOR showed the highest response in n-heptane exposure which depended on the adsorption and solubility properties of each porous material. When adding doped poly(p-phenylene vinylene) (dPPV) into the 80CuNaY matrix, the minimum detection vapor concentration decreased in acetone, methanol, and n-heptane vapors. For the selectivity, the composite between 80CuNaY and dPPV responded only in the polar vapors (acetone, methanol) whereas the composite between dPPV and 80CuNaMOR or dPPV_[90]80CuNaMOR responded only in the nonpolar vapor (n-heptane). The interactions between the sensing materials and the chemical vapors were investigated and identified by FTIR and AFM techniques.     

Studies on structural and electrical properties of Mg<Subscript>0. 5+y</Subscript> (Zr<Subscript>2-y</Subscript>Fe<Subscript>y</Subscript>) <Subscript>2</Subscript> (PO<Subscript>4</Subscript>) <Subscript>3</Subscript> ceramic electrolytes

The sample of Mg_{0. 5+y} (Zr_1-y Fe_y) ₂ (PO₄) ₃ (0.0 ≤y ≤0.5) was synthesized using the sol-gel method. The structures of the samples were investigated using X-ray diffraction and Fourier transform infrared spectroscopy measurement. XRD studies showed that samples had a monoclinic structure which was iso-structured with the parent compound, Mg_0.5Zr (PO₄) ₃. The complex impedance spectroscopy was carried out in the frequency range 1–6 MHz and temperature range 303 to 773 K to study the electrical properties of the electrolytes. The substitutions of Fe³⁺ with Zr⁴⁺ in the Mg_0.5Zr (PO₄) ₃ structure was introduced as an extrainterstitial Mg²⁺ ion in the modified structured. The compound of Mg_0.5+y (Zr_1-y Fe_y)₂(PO₄)₃ with y?=?0.4 gives a maximum conductivity value of 1.25?×?10^?5 S cm^?1 at room temperature and 7.18?×?10^?5 S cm^?1 at 773 K. Charge carrier concentration, mobile ion concentration, and ion hopping rate are calculated by fitting the conductance spectra to power law variation, σ _ac (ω)?=?σ _o ? +?Aω ^α . The charge carrier concentration and mobile ion concentration increases with increase of Fe³⁺ inclusion. This implies the increase in conductivity of the compounds was due to extra interstitial Mg²⁺ ions.     

Electrochemical comparison of LiFe<Subscript>0.4</Subscript>Mn<Subscript>0.595</Subscript>Cr<Subscript>0.005</Subscript>PO<Subscript>4</Subscript>/C and LiMnPO<Subscript>4</Subscript>/C cathode materials

A comparison of electrochemical performance between LiFe_0.4Mn_0.595Cr_0.005PO₄/C and LiMnPO₄/C cathode materials was conducted in this paper. The cathode samples were synthesized by a nano-milling-assisted solid-state process using caramel as carbon sources. The prepared samples were investigated by XRD, SEM, TEM, energy-dispersive X-ray spectroscopy (EDAX), powder conductivity test (PCT), carbon-sulfur analysis, electrochemical impedance spectroscopy (EIS), and galvanostatic charge-discharge cycling. The results showed that LiFe_0.4Mn_0.595Cr_0.005PO₄/C exhibited high specific capacity and high energy density. The initial discharge capacity of LiFe_0.4Mn_0.595Cr_0.005PO₄/C was 163.6 mAh g^?1 at 0.1C (1C = 160 mA g^?1), compared to 112.3 mAh g^?1 for LiMnPO₄/C. Moreover, the Fe/Cr-substituted sample showed good cycle stability and rate performance. The capacity retention of LiFe_0.4Mn_0.595Cr_0.005PO₄/C was 98.84 % over 100 charge-discharge cycles, while it was only 86.64 % for the pristine LiMnPO₄/C. These results indicated that Fe/Cr substitution enhanced the electronic conductivity for the prepared sample and facilitated the Li⁺ diffusion in the structure. Furthermore, LiFe_0.4Mn_0.595Cr_0.005PO₄/C composite presented high energy density (606 Wh kg^?1) and high power density (574 W kg^?1), thus suggested great potential application in lithium ion batteries (LIBs).     

Preparation and performance of sulfur–carbon composite based on hollow carbon nanofiber for lithium-sulfur batteries

A unique structured hollow carbon nanofiber–sulfur composite material (HCF–S) was fabricated and characterized in lithium-sulfur batteries. It is found that a part of spherical sulfur particles are located in the voids formed by the intertwined fibers and the others are confined in hollow channel of the HCF. The high conductive and porous HCF favors the construction of stable three-dimensional conducting network and convenient infiltration of the electrolytes into the cathode. The HCF–S cathode exhibits excellent electrochemical performance in the electrolyte with LiNO₃. By contrast, the ionic liquid electrolyte provides insufficient shuttle suppression and weakens ion transport, which leads to poor cycle and rate capability.