Isolation and Purification of Unstable Iridoid Glucosides from Traditional Chinese Medicine by Preparative High Performance Liquid Chromatography Coupled with Solid-phase Extraction

An efficient preparative method was successfully developed for isolation and purification of unstable components from medicinal plant extracts, using a combined method of preparative high performance liquid chro-matography(HPLC) and solid-phase extraction(SPE). The aim of this study was to obtain an effective method with high preparative efficiency and importantly to avoid the transformation of unstable compounds. The preparative HPLC system was based on an LC/MS controlled four-channel autopurification sys...     

PHOTOPHYSICAL STUDIES ON ORGANIC COMPOUNDS——TIME-RESOLVED TRANSIENT ABSORPTION SPECTRA STUDIES ON TRIPHENYLAMINE IN VARIOUS SOLVENTS

The transient absorption spectra of triphenylamine (TPA) in various solvents have beeninvestigated by the methods of nanosecond laser photolysis. The lifetimes of TPA were meas-ured. In hexane and ethanol, the transient absorptions of triplet state and triplet excimer ofTPA were observed. However, the transient absorptions of the TPA cation radical was alsoobserved in acetonitrile besides that of the triplet TPA monomer and excimer. According tothe experimental facts, the transient photophysical mechanism of TPA in various solvents hasbeen proposed.     

NATIONAL STANDARD OF HEAT CAPACITY MEASUREMENT OF SOLIDS IN THE RANGE OF 4.2—90K——AN AUTOMATED ADIABATIC CALORIMETER FROM 25 TO 90K AND MOLAR HEAT CAPACITIES OF α-ALUMINA

The construction of an automated adiabatic calorimeter for heat capacity measurement ofsolids in the temperature range of 25- 90K is described in detail. The sample vessel of thecalorimeter has thin radial vanes which make no contact with its inner wall and are distrib-uted evenly, thus greatly improving the internal thermal equilibration of the vessel. Theprecision of temperature control for the adiabatic shields and electrical leads of the calori-metric system are heightened to a great extent by using the high precision ACD- 79 modeladiabatic controller specially developed by us for this purpose. Measurements of the heatcapacities of high purity α-Al_2O_3, one of the internationally-accepted standard referencematerials, agree with those of the National Bureau of Standards (NBS), USA within ±0.3%,demonstrating the reliability of this apparatus.     

Synthesis, Structure and Luminescent Property of a Zinc(Ⅱ) Coordination Polymer Incorporating Flexible Cyclohexane-1,2,3,4,5,6-hexacarboxylate Ligand

The hydrothermal reaction of Zn(NO3)2·4H2O, cyclohexane-1,2,3,4,5,6-hexacarboxylic acid hydrate (H6LI·H2O, cis-conformation LI: a,e,a,e,a,e) and 2,2'-bpy yielded a new coordination polymer [Zn2(H2LII)(2,2'-bpy)]·2H2O(trans-conformation LII: e,e,e,e,e,e), which was characterized by single-crystal X-ray diffraction, elemental analysis, IR and XRPD(X-ray powder diffraction). This complex crystallized in the triclinic system, with P1 space group and parameters a=0.66922(5) nm, b=0.97291(8) nm, c=1.22184(9) nm, ...     

反相高效液相色谱法测定肾复康胶囊中的野黄芩苷和芦丁

建立了肾复康胶囊中野黄芩苷和芦丁的反相高效液相色谱测定方法。以甲醇-水为提取溶剂,采用超声提取法对样品进行前处理。以0.02 mol/L磷酸二氢钾缓冲溶液(含1.0％（体积分数）冰醋酸)-甲醇（体积比为63∶37）为流动相,于330 nm波长下检测,肾复康提取液中野黄芩苷和芦丁可达基线分离,分析时间在20 min内。野黄芩苷和芦丁在10 ~300 mg/L内,其峰面积与浓度之间线性关系良好,目标物的加标回收率大于98％。该方法适用于肾复康胶囊及相关药材中野黄芩苷和芦丁黄酮类化合物的测定和质量控制。     

沥青基球状活性炭气相吸脱附行为研究

本文利用热重法研究了一系列沥青基球状活性炭对蒸汽及正已烷蒸汽的动态吸脱附曲线。结果表明,PSAC对苯蒸汽的吸附及再生性能优良。随吸附温度的降低、比表面积的增大、总孔容及微孔容的增大,PSAC对苯蒸汽的吸附容量增大。PSAC对正已烷的吸附速度大于对苯蒸汽的吸附速度,但其对正已烷的平衡吸附容量小于对苯蒸汽的平衡吸附容量。     

颗粒流的动力学模型和实验研究进展

首先叙述了颗粒流研究的背景和基本概念,接着概述了颗粒流动力学研究的三种基本数学力学模型:颗粒动理论(kinetic theory)模型、摩擦塑性模型和离散元模拟模型.介绍了它们的基本原理,并分析了各个模型的优缺点和适用范围.随之,对颗粒流的实验研究情况作了简要的介绍,列举了研究中几种常用的试验方法和观测手段,以及观测到的一些典型现象.最后,我们简述了颗粒流研究的主要困难,并提出了某些有待解决的研究课题.      

结构动力优化设计述评与展望

结构动力优化设计是当前工程结构设计研究领域中的前沿性课题。文中着重从结构动力特性优化、结构动力响应设计、结构动力灵敏度分析和基于可靠性的结构动力优化设计等四个专题方面对结构动力优化设计研究的发展与现状进行了述评,并粗略地展望了结构动力优化研究未来的发展趋势。      

基于拓扑描述函数的连续体结构拓扑优化方法

提出了一种利用拓扑描述函数(TDF)作为拓扑设计变量求解连续体结构拓扑优化问题 的新方法. 优化问题的目标函数是结构的整体柔顺性，约束条件为对于可利用材料的体积限 制. 这种方法不仅可以消除拓扑优化中经常出现的棋盘格式等数值不稳定现象，而且能够有 效地抑制传统算法处理此类优化问题时所引发的边界扩散效应. 与其它的基于水平集描述函 数的拓扑优化方法相比，所提出的算法不仅无需求解控制水平集函数演化的双曲守恒方 程，而且合理地考虑了目标函数的拓扑导数信息，因而使得算法的计算效率有了显著的提高.     

宽板塑性弯曲成形过程中的板厚变化规律

根据宽板弯曲过程中的变形与应力分布特征，提出了一种计算弯曲过程中板料厚度随弯曲程度变化的新的近似解答方法．该方法基于塑性增量理论，应用塑性成形过程的体积不变假设和弯曲过程的平面假设．作为算例，得到了理想刚塑性材料的板料厚度、变薄系数以及应变中性层内移系数随板料弯曲内表面曲率半径变化的规律，并与实验数据进行了比较，两吻合良好．