Radical Hydrodeiodination of Aryl,Alkenyl, Alkynyl,and Alkyl Iodides with an Alcoholate as Organic Chain Reductant through Electron Catalysis

A simple and efficient method for radical hydrodeiodination is reported. The novel approach uses electron catalysis. In situ generated Na‐alcoholates are introduced as radical chain reducing reagents and reactions work with O₂ as cheap initiator. Hydrodeiodination works on aryl, alkenyl, alkynyl iodides and a tert‐alkyl iodide also gets reduced applying the method. Albeit less general, the method is also applicable to the reduction of aryl bromides. The novel reagent is successfully used to conduct typical reductive radical cyclization reactions and mechanistic studies are reported.     

X-ray absorption spectroscopy and density functional theory studies of [(H3buea)FeIII-X]n- (X = S2-, O2-, OH-): comparison of bonding and hydrogen bonding in oxo and sulfido complexes

Iron L-edge, iron K-edge, and sulfur K-edge X-ray absorption spectroscopy was performed on a series of compounds [Fe(III)H(3)buea(X)](n-) (X = S(2-), O(2-), OH(-)). The experimentally determined electronic structures were used to correlate to density functional theory calculations. Calculations supported by the data were then used to compare the metal-ligand bonding and to evaluate the effects of H-bonding in Fe(III)(-)O vs Fe(III)(-)S complexes. It was found that the Fe(III)(-)O bond, while less covalent, is stronger than the Fe(III)(-)S bond. This dominantly reflects the larger ionic contribution to the Fe(III)(-)O bond. The H-bonding energy (for three H-bonds) was estimated to be -25 kcal/mol for the oxo as compared to -12 kcal/mol for the sulfide ligand. This difference is attributed to the larger charge density on the oxo ligand resulting from the lower covalency of the Fe-O bond. These results were extended to consider an Fe(IV)(-)O complex with the same ligand environment. It was found that hydrogen bonding to Fe(IV)(-)O is less energetically favorable than that to Fe(III)(-)O, which reflects the highly covalent nature of the Fe(IV)(-)O bond.     

Investigation and optimization of the recovery of coal fines using oil agglomeration process: Use of waste oils from different sectors

The high cost of the bridging liquid subdues the implementation and commercialization of oil agglomeration process. To overcome this problem, waste oils from different sectors were used in this present study. The performance of the process was assessed based on the responses like ash rejection and organic matter recovery. The aim of the present study was to investigate the usage of waste oils from different sectors and to optimize and analyze the behavioral pattern showcased by different variables (pulp density, oil dosage, agglomeration time and oil type) using response surface methodology (Box-Behnken design). Experimental investigation shows that the optimum pulp density, oil dosage, agglomeration time and oil type condition obtained as 3%, 15%, 15?min and waste engine oil, respectively. At optimum condition, the % ash rejection and % organic matter recovery obtained as 63.94% and 81.8%, respectively.     

Design and synthesis of fluorescent symmetric bis-triazolylated-1,4-dihydropyridines as potent antibreast cancer agents

Herein, we report the synthesis of fluorescent 1,4-dihydropyridine-linked bis-triazoles (2a–2n) through Hantzsch synthesis by the condensation of o/m-chloro-substituted benzaldehyde, ethyl 3-oxo-4(prop-2-yn-1-yloxy)butanoate, and ammonium acetate in the presence of Ba(NO₃)₂ as a catalyst followed by the click reaction of resultant Hantzsch product (1) with various aromatic as well as aliphatic azides. All the synthesized compounds were well characterized by ¹H-NMR, ¹³C-NMR, FTIR, and HRMS spectral techniques. Antibreast cancer evaluation of all the synthesized derivatives revealed that the compounds 2f (IC₅₀?=?7?±?0.02?µM) and 2g (IC₅₀?=?5?±?0.03?µM) showed better anticancer activity (lower IC₅₀) than the standard drug tamoxifen (IC₅₀?=?11.2?±?0.01?µM) against breast carcinoma (MDA-MB-231) cell line. The synthesized compounds were also screened against normal human embryonic kidney (HEK-293) cell line and found to be nontoxic. The fluorescent nature and cytotoxicity assay of these newly synthesized hybrids recommend their utility in tumor cell imaging.     

A Diazido Mannose Analogue as a Chemoenzymatic Synthon for Synthesizing Di‐N‐acetyllegionaminic Acid‐Containing Glycosides

A chemoenzymatic synthon was designed to expand the scope of the chemoenzymatic synthesis of carbohydrates. The synthon was enzymatically converted into carbohydrate analogues, which were readily derivatized chemically to produce the desired targets. The strategy is demonstrated for the synthesis of glycosides containing 7,9‐di‐N‐acetyllegionaminic acid (Leg5,7Ac₂), a bacterial nonulosonic acid (NulO) analogue of sialic acid. A versatile library of α2‐3/6‐linked Leg5,7Ac₂‐glycosides was built by using chemically synthesized 2,4‐diazido‐2,4,6‐trideoxymannose as a chemoenzymatic synthon for highly efficient one‐pot multienzyme (OPME) sialylation followed by downstream chemical conversion of the azido groups into acetamido groups. The syntheses required 10 steps from commercially available d ‐fucose and had an overall yield of 34–52 %, thus representing a significant improvement over previous methods. Free Leg5,7Ac₂ monosaccharide was also synthesized by a sialic acid aldolase‐catalyzed reaction.     

An iron catalyzed regioselective oxidation of terminal alkenes to aldehydes

Fe(BF(4))(2)·6H(2)O with pyridine-2,6-dicarboxylic acid and PhIO can efficiently catalyze the regioselective oxidation of terminal alkene derivatives to aldehydes under mild and benign reaction conditions.     

Hierarchical Order Parameters for Macromolecular Assembly Simulations I: Construction and Dynamical Properties of Order Parameters

Macromolecular assemblies often display a hierarchical organization of macromolecules or their sub-assemblies. To model this, we have formulated a space warping method that enables capturing overall macromolecular structure and dynamics via a set of coarse-grained order parameters (OPs). This article is the first of two describing the construction and computational implementation of an additional class of OPs that has built into them the hierarchical architecture of macromolecular assemblies. To accomplish this, first, the system is divided into subsystems, each of which is described via a representative set of OPs. Then, a global set of variables is constructed from these subsystem-centered OPs to capture overall system organization. Dynamical properties of the resulting OPs are compared to those of our previous nonhierarchical ones, and implied conceptual and computational advantages are discussed for a 100ns, 2 million atom solvated Human Papillomavirus-like particle simulation. In the second article, the hierarchical OPs are shown to enable a multiscale analysis that starts with the N-atom Liouville equation and yields rigorous Langevin equations of stochastic OP dynamics. The latter is demonstrated via a force-field based simulation algorithm that probes key structural transition pathways, simultaneously accounting for all-atom details and overall structure.     

Rational design of single-composition ABC collagen heterotrimers

Design of heterotrimeric ABC collagen triple helices is challenging due to the large number of competing species that may be formed. Given the required one amino acid stagger between adjacent peptide strands in this fold, a ternary mixture of peptides can form as many as 27 triple helices with unique composition or register. Previously we have demonstrated that electrostatic interactions can be used to bias the helix population toward a desired target. However, homotrimeric assemblies have always remained the most thermally stable species in solution and therefore comprised a significant component of the peptide mixture. In this work we incorporate complementary modifications to this triple-helical design strategy to destabilize an undesirable competing state while compensating for this destabilization in the desired ABC composition. The result of these modifications is a new ABC triple-helical system with high thermal stability and control over composition, as observed by NMR. An additional set of modifications, which exchanges aspartate for glutamate, results in an overall lowering of stability of the ABC triple helix yet shows further improvement in the system's specificity. This rationally designed system helps to elucidate the rules governing the self-assembly of synthetic collagen triple helices and sheds light on the biological mechanisms of collagen assembly.     

Selective recognition of fluoride and acetate by a newly designed ruthenium framework: experimental and theoretical investigations

An effective anion sensor, [Ru(II)(bpy)(2)(H(2)L(-))](+) (1(+)), based on a redox and photoactive {Ru(II)(bpy)(2)} moiety and a new ligand (H(3)L = 5-(1H-benzo[d]imidazol-2-yl)-1H-imidazole-4-carboxylic acid), has been developed for selective recognition of fluoride (F(-)) and acetate (OAc(-)) ions. Crystal structures of the free ligand, H(3)L and [1](ClO(4)) reveal the existence of strong intramolecular and intermolecular hydrogen bonding interactions. The structure of [1](ClO(4)) shows that the benzimidazole N-H of H(2)L(-) is hydrogen bonded with the pendant carboxylate oxygen while the imidazole N-H remains free for possible hydrogen bonding interaction with the anions. The potential anion sensing features of 1(+) have been studied by different experimental and theoretical (DFT) investigations using a wide variety of anions, such as F(-), Cl(-), Br(-), I(-), HSO(4)(-), H(2)PO(4)(-), OAc(-) and SCN(-). Cyclic voltammetry and differential pulse voltammetry established that 1(+) is an excellent electrochemical sensor for the selective recognition of F(-) and OAc(-) anions. 1(+) is also found to be a selective colorimetric sensor for F(-) or OAc(-) anions where the MLCT band of the receptor at 498 nm is red shifted to 538 nm in the presence of one equivalent of F(-) or OAc(-) with a distinct change in colour from reddish-orange to pink. The binding constant between 1(+) and F(-) or OAc(-) has been determined to be logK = 7.61 or 7.88, respectively, based on spectrophotometric titration in CH(3)CN. The quenching of the emission band of 1(+) at 716 nm (λ(ex) = 440 nm, Φ = 0.01 at 298 K in CH(3)CN) in the presence of one equivalent of F(-) or OAc(-), as well as two distinct lifetimes of the quenched and unquenched forms of the receptor 1(+), makes it also a suitable fluorescence-based sensor. All the above experiments, in combination with (1)H NMR, suggest the formation of a 1:1 adduct between the receptor (1(+)) and the anion (F(-) or OAc(-)). The formation of 1:1 adduct {[1(+)·F(-)] or [1(+)·OAc(-)]} has been further evidenced by in situ ESI-MS(+) in CH(3)CN. Though the receptor, 1(+), is comprised of two N-H protons associated with the coordinated H(2)L(-) ligand, only the free imidazole N-H proton participates in the hydrogen bonding interactions with the incoming anions, while the intramolecularly hydrogen bonded benzimidazole N-H proton remains intact as evidenced by the crystal structure of the final product (1). The hydrogen bond mediated anion sensing mechanism, over the direct deprotonation pathway, in 1(+) has been further justified by a DFT study and subsequent NBO analysis.     

Direct heteroarylation of tautomerizable heterocycles into unsymmetrical and symmetrical biheterocycles via Pd/Cu-catalyzed phosphonium coupling

The direct cross-coupling of tautomerizable heterocycles with various unfunctionalized heteroarenes has been achieved through PyBroP-mediated and Pd/Cu-catalyzed sequential C-OH/C-H activation. The methodology allows a facile entry into novel diazine-azole biheterocyclic frameworks. Moreover, an unprecedented Pd-catalyzed phosphonium homocoupling of tautomerizable heterocycles was also developed to afford a direct synthetic route to symmetrical 1,2-, 1,3-, and 1,4-bidiazine units.