Dynamical Properties of Some Statistical Quantities for a Quantum System in Generalized Negative Binomial States

We estimate the quantum state of a qubit and a quantized radiation field yielding a generalized negative binomial distribution (GNBD). We give an explicit form for various generalized negative binomial states associated to superposition, even, odd, and q-deformed states. We investigate the dynamical properties of the Mandel parameter as a quantifier of the statistical properties for the radiation field corresponding to its dynamics. We obtain the quantum Fisher information based on the estimation of the atomic state and compare it with the Mandel parameter for different instances of the GNBD. The link between the statistical quantities for different parameters of the GNBD is explored.     

Effects of photon field on heat transport through a quantum wire attached to leads

We theoretically investigate photo-thermoelectric transport through a quantum wire in a photon cavity coupled to electron reservoirs with different temperatures. Our approach, based on a quantum master equation, allows us to investigate the influence of a quantized photon field on the heat current and thermoelectric transport in the system. We find that the heat current through the quantum wire is influenced by the photon field resulting in a negative heat current in certain cases. The characteristics of the transport are studied by tuning the ratio, $?{\omega }_{\gamma }/k_{\mathrm{B}}\mathrm{\Delta }T$, between the photon energy, $?{\omega }_{\gamma }$, and the thermal energy, $k_{\mathrm{B}}\mathrm{\Delta }T$. The thermoelectric transport is enhanced by the cavity photons when $k_{\mathrm{B}}\mathrm{\Delta }T>?{\omega }_{\gamma }$. By contrast, if $k_{\mathrm{B}}\mathrm{\Delta }T<?{\omega }_{\gamma }$, the photon field is dominant and a suppression in the thermoelectric transport can be found in the case when the cavity-photon field is close to a resonance with the two lowest one-electron states in the system. Our approach points to a new technique to amplify thermoelectric current in nano-devices.     

Importance of Darcy–Forchheimer porous medium in 3D convective flow of carbon nanotubes

This article explores Darcy–Forchheimer 3D flow of water-based carbon nanomaterial (CNTs). A bi-directional linear stretchable surface has been used to create the flow. Flow in porous space is represented by Darcy–Forchheimer expression. Heat transfer mechanism is explored through convective heating. Results for single-wall (SWCNTs) and multi-wall (MWCNTs) carbon nanotubes have been presented and compared. The reduction of partial differential system into nonlinear ordinary differential system is made through suitable variables. Optimal homotopic scheme is used for solutions development of governing flow problem. Optimal homotopic solution expressions for velocities and temperature are studied through graphs by considering various estimations of physical variables. Skin friction coefficients and local Nusselt number are analyzed through plots. Our findings show that the skin friction coefficients and local Nusselt number are enhanced for larger values of nanoparticles volume fraction.     

铜纳米阵列高效电解水产氧催化剂的制备

本文报道了一种利用简单的两步牺牲模板法,在泡沫铜基底表面完成了三维氧化铜纳米晶阵列的生长. 氧化铜纳米晶阵列具有良好的导电性,稳定性,在碱性溶液中有着优秀的电解水产氧催化性能. 氧化铜纳米晶阵列催化水的电化学氧化只需400 mV的过电势即可达到100 mA/cm²的电流密度,与其它铜基电解水产氧催化剂以及贵金属IrO₂相比都有着明显的优势. 氧化铜纳米晶阵列在270 mA/cm²左右的工作电流下连续工作10 h依然可以保持良好的稳定性,是相同的工作电压下IrO₂工作电流的10倍(约25 mA/cm²).     

Adsorption and photocatalytic degradation of methylene blue using high surface area titanate nanotubes (TNT) synthesized via hydrothermal method

Removal of methylene blue (MB) via adsorption and photocatalysis using titanate nanotubes (TNTs) with different surface areas were investigated and compared to commercial titanium dioxide (TiO₂) P25 Degussa nanoparticles. The TNTs with surface area ranging from 20 m²/g to 200 m²/g were synthesized via hydrothermal method with different reaction times. TEM imaging confirmed the tubular structure of TNT while XRD spectra indicated all TNTs exhibited anatase crystallinity. Batch adsorption rate showed linearity with surface properties of TNTs, where materials with higher surface area showed higher adsorption rate. The highest MB adsorption (70%) was achieved by TNT24 in 60 min whereas commercial TiO₂ exhibited the lowest adsorption of only 10% after 240 min. Adsorption isotherm studies indicated that adsorption using TNT is better fitted into Langmuir adsorption isotherm than Freundlich isotherm model. Furthermore, TNT24 was able to perform up to 90% removal of MB within 120 min, demonstrating performance that is 2-fold better compared to commercial TiO₂. The high surface area and surface Bronsted acidity are the main reasons for the improvement in MB removal performance exhibited by TNT24. The improvement in surface acidity enhanced the adsorption properties of all the nanotubes prepared in this study.     

Enzyme-free impedimetric glucose sensor based on gold nanoparticles/polyaniline composite film

A non-enzymatic impedimetric glucose sensor was fabricated based on the adsorption of gold nanoparticles (GNPs) onto conductive polyaniline (PANI)-modified glassy carbon electrode (GCE). The modified electrode (GCE/PANI/GNPs) was characterized by using cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS), and scanning electron microscopy (SEM). The determination of glucose concentration was based on the measurement of EIS with the mediation of electron transfer by ferricyanide ([Fe(CN)₆]^3?). The [Fe(CN)₆]^3? is reduced to ferrocyanide ([Fe(CN)₆]^4?), which in turn is oxidized at GCE/PANI/GNPs. An increase in the glucose concentration results in an increase in the diffusion current density of the [Fe(CN)₆]^4? oxidation, which corresponds to a decrease in the faradaic charge transfer resistance (R _ct). A wide linear concentration range from 0.3 to 10 mM with a lower detection limit of 0.1 mM for glucose was obtained. The proposed sensor shows high sensitivity, good reproducibility, and stability. In addition, the sensor exhibits no interference from common interfering substances such as ascorbic acid, acetaminophen, and uric acid.     

Investigation of isospin forbidden 0+ → 0+ Fermi beta decays with Pyatov method

In the present work, the matrix elements, isospin impurities and log ft values of the isospin forbidden 0⁺ → 0⁺ beta decays have been investigated. The calculated results have been compared with available experimental and another theoretical data. The isotopic invariance of the Hamiltonian has been restored by Pyatov method. Within the quasi-particle random phase approximation (QRPA), the computations have been performed both in presence and absence of the pairing interactions.     

Priority-based parameter optimization strategy for reducing the effects of four-wave mixing on WDM system

In order to meet the ultra high speed and ultra long-haul transmission distance in wavelength division multiplexing (WDM) systems, the nonlinear impairment affecting the overall spectral efficiency and system performance should be minimized. This paper proposes a strategy to mitigate the four-wave mixing (FWM) effect in WDM system. The strategy determines the effect of both single and combined effects of second, third, and fourth optimization priority parameters such as fiber length, input power, dispersion, channel spacing, and effective area on FWM power. A comparison study was made under different types of optical fiber such as single-mode fiber (SMF), dispersion shifted fiber, non-zero dispersion fiber, and non-zero dispersion shifted fiber. In addition, the system performance in term of bit-error-rate was calculated in the case of single priority (impact of effective area) and combined priority (impact of effective area, input power, fiber length and channel spacing). The results show that the FWM effect was reduced based on the transmission parameters order of optimization, i.e., priority selection proposed. Moreover, the results indicated that increasing sequentially the effective area, fiber length; channel spacing and decreasing the input power provide the most significant sequence in suppressing the effects of FWM. This priority sequence brought the suppression ratio to approximately 26.3% in SMF, which suppressed the FWM effects up to −50 dBm. In term of BER; the combined priority introduces improvement in BER of 2.31 × 10⁻²⁵ in comparison with single priority that has value of BER 4 × 10⁻¹⁴. Finally, this work suggests that the proposed priority-based parameter optimization strategy is an ideal solution for optimum performance of WDM system.     

L-Band Multi-Wavelength Brillouin–Raman Fiber Laser with 20-GHz Channel Spacing

Abstract

A tunable multi-wavelength L-band Brillouin–Raman fiber laser with a 20-GHz channel spacing utilizing bidirectional ring cavity is proposed and experimentally investigated. The laser employs a co-pumped dispersion compensating fiber as a gain medium for both Brillouin and Raman gains. With a Raman pump of 425 mW, the laser system can generate up to 12 double-spaced Brillouin Stokes signals. This simple laser configuration provides stable Brillouin Stokes signals in the absence of self-lasing cavity modes with a tuning range exceeding 35 nm without using any filtering mechanism. The Stokes signals have more than 20 dB of optical signal-to-noise ratio.