Methods for creating the self-regulating mechanisms of passive systems for ensuring thermal regime of devices for space application

The passive systems for ensuring the thermal regime of space objects, which are in current use, can preserve the temperature at the same level only under a certain orientation of spacecraft and at a constant heat release of the equipment. At a variable orientation of the space object, its temperature may vary due to a possible illumination of the radiator-emitter of the system for ensuring the thermal regime by the solar or planet radiation. At a variable heat release the object temperature changes due to an off-design regime of the radiator operation. To compensate for the given effects the active elements are used — the heaters and coolers. This reduces the reliability of thermal regulation system and, consequently, the reliability of the entire spacecraft. The solutions are proposed, which create in the absence of active elements in the thermal regulation system the internal mechanisms enabling a compensation of the variability of heat fluxes both at a reorientation of the spacecraft and at a variation of the internal heat release.     

Influence of the energy and velocity spread in the electron beam on the starting conditions and efficiency of a gyrotron

We study theoretically the influence of the spread of initial energies and velocities in the electron beam on the starting conditions and efficiency of a gyrotron. We compare various analytical and numerical models and the results of experimental studies of gyrotrons in which the interaction takes place at the first and second harmonics of the cyclotron frequency. The aftercavity interaction of the electron beam with the high-frequency field in the output waveguide transition is taken into account. The influence of the energy spread on the recuperation efficiency is estimated. Permissible spreads of the initial energies and electron velocities are determined. __________ Translated from Izvestiya Vysshikh Uchebnykh Zavedenii, Radiofizika, Vol. 49, No. 2, pp. 121–133, February 2006.     

Thermal conductivity, dislocation density and GaN device design

The performance of high power transistor devices is intimately connected to the substrate thermal conductivity. In this study, the relationship between thermal conductivity and dislocation density is examined using the 3 omega technique and free standing HVPE GaN substrates. Dislocation density is measured using imaging cathodoluminescence. In a low dislocation density regime below 10⁵ cm⁻², the thermal conductivity appears to plateau out near 230 W/K m and can be altered by the presence of isotopic defects and point defects. For high dislocation densities the thermal conductivity is severely degraded due to phonon scattering from dislocations. These results are applied to the design of homoepitaxially and heteroepitaxially grown HEMT devices and the efficiency of heat extraction and the influence of lateral heat spreading on device performance are compared.     

Heavy ions in RHIC — How to get to higher luminosities?

Luminosity mainly depends on the beam intensity of the circulating beams and the beam profiles at the interaction points. By either increasing the total beam current or decreasing its size the instantaneous luminosity can be increased. In addition any method to slow down beam growth and debunching processes will further improve the luminosity which can be integrated over a store. Optimizing beam cleaning procedures such as collimation or abort gap cleaning will further increase the amount of usable luminosity for experiments. This paper will give a brief introduction to some accelerator basics of interest and the luminosity as a function of beam parameters. Limitations to the achievable integrated luminosity as well as future upgrades to overcome these limitations are presented.     

Synthesis and conformational study of 1,2,3,4,5,6,7,8-octahydro-1,6-naphthiridines

A new class of endocyclic enamines, 1,6-disubstituted 1,2,3,4,5,6,7,8-octahydro-1,6-naphthiridines, was synthesized from 4-piperidone imines by successive subjecting the latter to lithiation with lithium diethylamide, to alkylation with 1-bromo-3-chloropropane, and to intramolecular cyclization. All stages were carried out as a unique process without isolation of the intermediate compounds. A thorough optimization of the process conditions, workup, and product storage was carried out. The conformational study of 1,6-disubstituted 1,2,3,4,5,6,7,8-octahydro-1,6-naphthiridines was performed.     

Evaluating Zn2SiO4:Mn phosphor for use in medical imaging radiation detectors

2 SiO₄:Mn phosphor was evaluated for use in radiation detectors of medical imaging systems. Zn₂SiO₄:Mn was used in the form of laboratory-prepared fluorescent layers (screens) with coating weights from 18 to 150 mg/cm². The phosphor was excited to luminescence by low-energy X-raysusing X-raytube voltages ranging from 15 to 50 kVp. The number of emitted optical photons per incident X-rayquantum was thus determined for various X-rayenergies and phosphor coating weights. The optical emission spectrum was also measured and it was used to evaluate the spectral compatibility of Zn₂SiO₄:Mn with radiographic films, photocathodes and the Si photodiode. Finally, phosphor optical properties were estimated by fitting a theoretical model to experimental data. Results showed that Zn₂SiO₄:Mn is more efficient for low-energy X-rays. Its intrinsic conversion efficiency was found equal to 0.08, which is comparable to that of actually used phosphors. Zn₂SiO₄:Mn was also adequately compatible with orthochromatic films and the ES-20 photocathode, thus being appropriate for low-voltage radiography and fluoroscopy. Received: 31 July 1998/Accepted: 3 August 1998