Equilibrium Shapes of Pressure Vessel Domes in Asymmetric Winding

Errors in the programs of winding pressure vessels can lead to an asymmetric reinforcement structure, which affects the equilibrium shape of their domes and the tension in the left and right families of filaments. In this paper, equations determining the equilibrium shape of the domes, the tension in filaments, and the shear stresses between layers are obtained. Examples with winding trajectories in the form of geodesics and constant-deviation lines are considered. It is found that, for pressure vessels, in the absence of external torque, the tension levels in filaments of the left and right families differ considerably. It is also revealed that, for actual friction coefficients in winding, the shear stresses taken up by the binder are insignificant. __________ Translated from Mekhanika Kompozitnykh Materialov, Vol. 41, No. 6, pp. 743–752, November–December, 2005.     

226Ra in milk of the dairy cattle from the rural region of Pernambuco, Brazil

Summary Studies performed by the Brazilian Nuclear Corporation (NUCLEBRAS), in collaboration with the Geological Survey Company of Brazil (CPRM), identified high levels of natural uranium in the districts of Pedra and Venturosa, in the rural region of the state of Pernambuco (PE) - Brazil, where the maximum value found in rocks was 22,000 mg.     

T-x-y diagram of the Ni-Bi-Se system

Some polythermal sections of the Ni-Bi-Se system have been investigated by DTA, X-ray powder diffraction, microstructural analysis, and microhardness measurements. The liquidus surface has been constructed for this system. The compounds NiBi₂Se₄ and Ni₃Bi₂Se₂ are formed by dystectic reactions and melt at 1088 and 980 K, respectively. The regions of primary and joint phase crystallization have been determined. A commutation of Bi₂Se₃-based thermoelements with a metal nickel bus-bar has been proposed.     

Mechanical mixtures of Me (Ni, Pd) Ce oxides and silica-supported heteropolyacids: Role and optimal concentration of each active species in n-hexane isomerization

Catalytic properties of silica-supported heteropolyacids (HPA) in a mechanical mixture with reduced Me-Ce oxides (Me = Ni, Pd) in n-hexane isomerization are studied. The role of each component of the mixed oxides (Ce and, typically, Ni and Pd) and their optimum content has been illuminated: cerium is not only beneficial for eliminating or preventing coke deposition but is also effective for maintaining the Keggin structure of the highly-organized HPA during the reaction and probably allows a better dispersion of the second metal species. Nickel and palladium, present as Ni⁰ and Pd⁰, reinforce the activation of the alkane, which is difficult to obtain by means of a direct attack by an acid, and, thus, enhance noticeably the activity of the catalyst. The best mechanical mixtures are obtained with 30–70 wt % NiCeO-HPW/SiO₂ and 50–50 wt % Pd_0.1CeO-HPW/SiO₂. These mixtures have the highest efficiency for a Ni/(Ni + W) atomic ratio of 0.66 and a Pd/(Pd + W) ratio of 0.40, respectively. Finally, the conversion of n-hexane is in the order HPW > HSiW > HBW, which seems to be consistent with the order of their acid strength as per the literature, but the isomerization selectivity appears to be slightly higher on HSiW. Published in Russian in Kinetika i Kataliz, 2006, Vol. 47, No. 1, pp. 24–28. The text was submitted by the authors in English.     

Papieruntersuchung

Analytical and Bioanalytical Chemistry -     

Zur directen Bestimmung des Chlors neben Brom

Ohne ZusammenfassungDiese Arbeit wurde im Sommersemester vorigen Jahres im analytischen Laboratorium der technischen Hochschule in Aachen ausgeführt; die Veröffentlichung der Resultate verzögerte sich jedoch in Folge Domicilwechsels und anderer Umstände um einige Monate.