Single-mode rib polymer waveguides and electro-optic polymer waveguide switches

Mode-matching and effective index methods are used to analyze single-mode operation of optical rib polymer waveguides. Their single-mode waveguiding conditions are determined. Single-mode rib waveguides fabricated from guest–host polyetherketone are presented. The estimated propagation loss of straight rib-waveguides is 0.7 dB/cm at 1.55 μm. Furthermore, by using the mode field-transfer matrix method, 2×2 and 4×4 polymer Mach–Zehnder interference switch operating at 1.55 μm wavelength has been designed based on optical multi-mode interference.     

Beta-exposure in a neutron activation laboratory

Summary In virtually all neutron activation analysis laboratories, researchers are given film badges known as thermoluminescence dosimeters (TLD's) that are monitored on a monthly basis. Sometimes additional pocket dosimeters are worn to get a daily reading of exposure, while in other instances ring badges are worn to assess beta doses. However, more than often little consideration is given to beta-exposure rates that arise from the plethora of radionuclides produced in the many types of samples irradiated. A common mistake is to assess gamma-exposures of activated samples that rely on the use of a beta-shield on the survey meter. Our experimental results have shown that there are many high energy beta-particles from neutron activated samples that can easily penetrate the beta-shield and thus give an underestimation of the total beta-exposure.     

Stability of steady nonisothermal flow in a vertical layer with permeable boundaries in the microconvection model

The problem of the stability of steady convective viscous incompressible fluid flow in a vertical layer with boundaries at different temperatures is considered in the presence of transverse blowing through the layer. The complete spectral problem is solved for a silicon melt. The neutral curve is constructed and the critical Grashof number is found. The numerical calculations show that the presence of transverse blowing significantly affects the flow stability. As compared with the Oberbeck-Boussinesq model, in the microconvection model the instability develops at lower wavenumbers.     

A Noninvasive, on Wafer Method to Determine the Intrinsic Stress of a Polymer Layer

The method described in this paper allows an investigator to determine the intrinsic stress of a polymer layer in a way that does not result in damage to devices or test structures. The method requires that a small area of the polymer be released from the substrate to form a diaphragm. The diaphragm is stimulated with acoustic white noise and the diaphragm movement is monitored with a laser vibrometer. The first few resonance frequencies of the diaphragm are obtained using a laser vibrometer and then those frequencies are used to calculate the membrane intrinsic bi-axial tension.     

Changes in the kurtosis parameter of super-Gaussian beams passing through a spherically aberrated lens

Based on the Collins formula and irradiance moments definition, the propagation of the kurtosis parameter of super-Gaussian beams through a spherically aberrated lens is studied. Detailed numerical results are given. It is shown that, as compared with aberration-free super-Gaussian beams, the profile of spherically aberrated super-Gaussian beams can be leptokurtic, mesokurtic or platykurtic, depending on the aberration and propagation distance. The results for the spherically aberrated Gaussian beams can be dealt with as a special case treated in this paper. Finally, the advantage of our method is pointed out.     

GaAsN/AlAs/AlGaAs double barrier quantum wells grown by molecular beam epitaxy as an alternative to infrared absorption below 4 μm

In this work, we report on the design, growth and characterization of GaAsN/AlAs/AlGaAs double barrier quantum well infrared detectors to achieve intraband absorption below 4 μm. Due to the high effective mass of N-dilute alloys, it is common for these N-containing double barrier quantum well structures to have more than one bound state within the quantum well, enabling the possibility of achieving multispectral absorption from these confined levels to the quasi-bound. Based on a transfer matrix calculation we will study the influence of the potential parameters, in particular the well width and the introduction of a GaAs spacer layer in between the N-well and the AlAs barriers. We will compare the case in which there are two confined levels with the case in which only one level is bound, like in the conventional AlGaAs/AlAs/GaAs structures. On the basis of the simulation, we have grown and characterized some N-containing double barrier detectors. Moreover, an optimization of the post-growth annealing treatments of the GaAsN quantum well structures has also been performed. Finally, room temperature absorption measurements of both as-grown and annealed samples are presented and analyzed.     

Modified Three-Dimensional Formulations of Bending Problems of Homogeneous Plates and Beams under Complex Fixing Conditions

Modified three-dimensional formulations of bending problems of homogeneous elastic plates and beams are considered. Modification of the known three-dimensional formulations reduces to using additional constraints imposed on displacement functions. An advantage of the formulations proposed is that complex fixing conditions of plates and beams can be taken into account.     

Application of quasi-steady-state plasma streams for simulation of ITER transient heat loads

The paper presents experimental investigation of energy characteristics of the plasma streams generated with quasi—steady—state plasma accelerator QSPA Kh-50 and adjustment of plasma paramenters from the point of view its applicability for simulation of transient plasma heat loads expected for ITER disruptions and type I ELMs. Possibility of generation of high-power magnetized plasma streams with ion impact energy up to 0.6 keV, pulse length 0.25 ms and heat loads varied in wide range from 0.5 to 30 MJ/m² has been demonstrated and some features of plasma interaction with tungsten targets in dependence on plasma heat loads are discussed.