聚丙烯酰胺超高相对分子质量测量不确定度评定

根据SY/T 5862–2008聚丙烯酰胺相对分子质量测量方法,测量了超高分子量聚丙烯酰胺的相对分子质量。经过对聚丙烯酰胺相对分子质量测量过程引入的不确定度进行分析和评定,不确定度的来源主要是试样目标液配制过程中引入的不确定度,其次是相对分子质量测量重复性、试样固含量的测定以及温度所引入的不确定度。聚丙烯酰胺相对分子质量测定结果为(2500.6±32.6)×104,k=2。     

A tuning system for BEPCⅡ

The tuning system plays a very important role when a superconducting cavity is in operation. It cooperates with other control loops to adjust the cavity frequency with high precision, reduce the reflection power, guarantee the stability of beam, and ensure the safety of the superconducting cavity. This paper focuses mainly on the tuning system working principle, the working state and problems that Beijing Electron Positron Collider (BEPC ) has encountered during operation.     

Horizontal test for BEPC 500 MHz spare cavity

The horizontal test for the BEPC 500 MHz spare cavity has been completed at IHEP. The maximum voltage of the cavity reached 2.17 MV, while Q 0 was 5.78 × 108 . The process and results of the high power horizontal test are presented and discussed in this paper.     

Coupler conditioning and high power testing of ADS Spoke cavity

Power couplers,used in China-ADS proton linac injector I,are required to transfer 6 kW RF power to the superconducting Spoke cavities.At present,first the two couplers of a coaxial design have been fabricated,which accomplished a high power test at IHEP.The test results indicated that couplers of this design are qualified to deliver10 kW RF power in continuous travelling wave mode.This paper describes the coupler’s room temperature test procedures and results and discusses the original high power test,which was terminated due to serious out-gassing and after some modifications.In the final test,the couplers smoothly exceeded the design power level.     

Study and design of RF coupler for Chinese ADS HWR superconducting cavity

An RF power coupler is a key component of the superconducting accelerating system in Chinese ADS proton linac injector I, which is used to transmit 15 kW RF power from the power source to the superconducting HWR cavity. According to the requirement of working frequency, power level, transmission capability and cooling condition, the physics design of coupler has been finished, which includes RF structure optimization, thermal simulation, thermal stress analysis and so on. Based on this design, the prototype of HWR coupler has been fabricated, and it has successfully passed the high power test.     

时刻变换风险模型中的Gerber-Shiu函数

本文讨论时刻变换的复合泊松风险模型中的Gerber-Shiu函数,首先给出了Gerber-Shiu函数满足的积微分方程,接着引入Laplace变换的对偶变换Elzaki变换,得到了Gerber-Shiu函数的Elzaki变换的具体形式,最后用一个数值例子验证了用Elzaki逆变换求Gerber-Shiu函数的方法并分析了时刻变换对破产概率的影响.     

精确配置离散动力系统的所有Lyapunov指数

针对给定的确定性离散时间动力学系统,提出一种可以精确配置受控系统所有Lyapunov指数的混沌控制与反控制新方法.本文不限制给定系统的具体形式,仅利用取模运算和预设的一组Lyapunov指数,设计出一种新的状态反馈控制器.在控制器的作用下,受控系统的Lyapunov指数与预设的Lyapunov指数一致.控制器的形式简单,可以用于解决混沌控制和混沌反控制两种问题.给出了数学证明和两个实例,仿真结果显示了算法的有效性.     

梯形波纹同轴慢波结构色散特性及其纵向谐振特性

 利用傅里叶级数展开,给出了一种求解梯形慢波结构表达式的方法。通过数值模拟,研究了级数展开次数对求解精度的影响。当级数为10阶时,线型拟合而成的结构与原结构吻合较好。利用此表达式数值求解了色散方程,得到两个最低阶模quasi-TEM模和A 模。分析了为实现电子束与quasi-TEM模的-1次空间谐波相互作用慢波结构参数所需满足的条件,并指出利用此条件下纵向电场具有表面波的特点可实现横向模式选择。采用S参数理论研究有限长慢波结构的纵向谐振特性,提出在同轴慢波器件中加入同轴引出结构可减少所需慢波结构周期数,这不但使器件结构更为紧凑,还可避免纵模竞争从而提高器件效率、稳定产生微波频率。在此基础上设计了一种L波段同轴相对论返波振荡器,采用KARAT 2.5维全电磁粒子模拟程序研究了器件内束-波作用的物理过程。模拟结果表明,该器件具有径向尺寸小、束-波作用效率高的特点。在电子束能量700 keV、电子束流11.5 kA的条件下,器件在频率1.6 GHz处获得较高的微波输出,饱和后微波的平均功率达2.60 GW,平均效率约为32.3%。