流行性传染病动力学模型的近似解

研究了一类流行性传染病.描述了传播动力学的生态模型.利用同伦映射理论和方法,得到了相应模型的近似解.     

聚碳硅烷热解SiC陶瓷结构与微波吸收性能

以聚碳硅烷(PCS)为原料,通过800-1200℃热解制备了PCS-SiC陶瓷,采用SEM、XRD与拉曼光谱对样品形貌、晶相及自由碳结构进行了表征。测量了样品直流电导率,并用矩形波导法测试了试样在8.2-12.4 GHz(X波段)频率范围的复介电常数,根据传输线理论计算出不同厚度材料的反射损耗。结果表明,随着热解温度的升高,样品电导率升高,同时复介电常数实部与虚部增加,吸波性能得到改善。PCS-SiC陶瓷中自由碳石墨化是引起极化能力及电导损耗提高的原因。     

Predictions of pressure-induced structural transition,mechanical and thermodynamic properties of α-and β-Si₃N₄ ceramics:ab initio and quasi-harmonic Debye modeling

The plane-wave pseudo-potential method within the framework of ab initio technique is used to investigate the structural and elastic properties of α-and β-Si3N4.The ground-state parameters accord quite well with the experimental data.Our calculation reveals that α-Si3N4 can retain its stability to at least 40 GPa when compressed at 300 K.The α→β phase transformation would not occur in a pressure range of 0-40 GPa and a temperature range of 0-300 K.Actually,the α→β transition occurs at 1600 K and 7.98 GPa.For α-and β-Si3N4,the c axes are slightly more incompressible than the a axes.We conclude that β-Si3N4 is a hard material and ductile in nature.On the other hand,β-Si3N4 is also found to be an ionic material and can retain its mechanical stability in a pressure range of 0-10 GPa.Besides,the thermodynamic properties such as entropy,heat capacity,and Debye temperature of α-and β-Si3N4 are determined at various temperatures and pressures.Significant features in these properties are observed at high temperature.The calculated results are in good agreement with available experimental data and previous theoretical values.Many fundamental solid-state properties are reported at high pressure and high temperature.Therefore,our results may provide useful information for theoretical and experimental investigations of the Si3N4 polymorphs.     

扫描质子微探针质子束刻写

质子束刻写技术利用MeV能量的聚焦质子束对抗蚀剂材料直接刻写m甚至nm尺度微结构。研究了质子束刻写中抗蚀剂胶层样品厚度与涂层机旋转速度的关系以及曝光对抗蚀剂的影响,解决了质子束刻写中抗蚀剂厚胶层样品的制备、固化、显影等技术问题,利用扫描质子微探针系统,在正型抗蚀剂胶层上刻写出m尺度的海宝图形、 双矩形结构,在负型抗蚀剂上刻写出m尺度的平行线条、十字形微结构。     

例说放缩度的调整

涉及数列和式的不等式一直是高考的热点,常以 的形式出现,其中放缩技巧在解决问题的过程中起着关键作用,下面通过一个具体例子,谈谈调整放缩度的一些技巧．     

大间隙C波段三轴速调管束流调制模拟研究

利用SUPERFISH软件设计了一种兼具大间隙速调管及三轴速调管优势的C波段大间隙三轴速调管,对所设计大间隙三轴速调管的束流传输及调制情况进行了2维粒子模拟研究。模拟结果表明,三轴速调管设计需要特别关注"模式泄露"问题以及谨慎选择内导体接地支撑杆的位置,以获得稳定传输的电子束。综合考虑上述两个条件,在440 kV的二极管电压下,5.0 GHz,200 MW的强注入功率可以获得11.8 kA的基频调制积分电流,束流调制深度88%,调制电流峰峰值大于40 kA,且调制电流具有良好的频率及相位稳定性。在此基础上,初步模拟得到了大于2.0 GW的平均微波功率,平均效率约33.8%。     

Production of Charged Higgs Bosons from Left-Right Twin Higgs Model at TeV Energy e-γ Colliders

The left-right twin Higgs （LRTH） model predicts the existence of three additional Higgs bosons： one neutral Higgs φo and a pair of charged Higgs bosons φ±. In this paper, we study two pair production processes of these new particles at the next generation eγ colliders, i.e., e-γ → e-φ＋φ- , and e-γ→vRφ-φ0. We find that the production cross section of the process e-γ → e-φ＋φ- are at the level of several tens fb, the production cross section of the process e-γ→vRφ-φ0 can reach 0.35 fb with the reasonable parameter values. As long as the charged Higgs bosons are not too heavy, we conclude that these processes might be used to test for the left-right twin Higgs model in future high-energy linear collider experiments.     

双立方插值和二元三次样条插值在心磁图像处理中的应用

心磁图是根据人体心脏跳动产生的微弱磁场测量信号计算得到的医学图像,它较心电图诊断心脏疾病具有更高的灵敏度和准确性.为了提高心磁图的成像精度,通常需要对心磁检测数据进行插值处理.提供了双立方插值和二元三次样条插值两种插值方法,应用实例的结果表明,三次样条插值的效果比双立方插值效果好,基本能达到应用的要求.     

运动强度相关耦合J-C模型中的熵交换和纠缠

考虑一个运动的二能级原子与单模热光场强度相关耦合,采用量子约化熵研究原子和场的约化熵变化规律、原子与场的熵交换,用共生纠缠度研究原子与场的纠缠。并借助于数值计算方法,详细分析了在强度相关耦合J-C模型中,原子初态、热光场的平均光子数以及场模结构参数对熵交换和纠缠的影响。结果表明原子与光场的熵交换和纠缠均周期性地演化。选择适当的原子初态,可以使得原子的约化熵和光场的约化熵完全交换,这意味着原子与光场反相关。此外,场模结构参数增加导致熵交换的幅度减小,周期缩短。原子与热光场的纠缠随平均光子数的增加而减弱。     

Horizontal test for BEPCⅡ 500 MHz spare cavity

The horizontal test for the BEPCⅡ 500 MHz spare cavity has been completed at IHEP. The maximum voltage of the cavity reached 2.17 MV, while Q₀ was 5.78× 10⁸. The process and results of the high power horizontal test are presented and discussed in this paper.