多通道超声兰姆波检测板状结构中的裂纹

超声兰姆(Lamb)波在结构缺陷检测方面愈来愈受到重视,但目前Lamb波的应用局限于单信号源激励,单通道接收的方法,容易受到噪声干扰,其后续的信号分析处理也比较复杂。本文旨在采用多通道Lamb波对板状结构中的裂纹进行定量分析与诊断。在铝板的表面凿刻出不同深度的凹槽作为裂纹,通过线阵换能器采集在一定传播距离内的多通道Lamb波信号,并采用二维傅里叶变换分析在不同深度的裂纹下,Lamb波模式能量的变化规律。结果表明,相对于完好铝板中的Lamb波信号,裂纹的存在会使Lamb波发生模式转换现象,并且转换模式能量百分比随裂纹深度的增加而线性增加。其结果为Lamb波评价板状结构中的裂纹状况提供了一种可能的方法。     

钠灯下α-蒎烯光敏氧化反应中区域选择性的催化调控

发展了一种简单有效的α-蒎烯光敏催化氧化方法,该方法以高压钠灯为绿色光源,内循环氧气作为氧化剂和搅拌气,自制水浴式光化学反应器.考察了催化剂种类和反应条件对α-蒎烯转化率和产物选择性的影响.结果表明,α-蒎烯可通过催化一步生成单萜醇、醛和酮,且通过催化剂的酸碱协同作用可调节产物的区域选择性.当以N,N-二甲基甲酰胺为溶...     

Nonlinear inversion of ultrasonic guided waves for in vivo evaluation of cortical bone properties

Ultrasonic guided waves (UGWs), which propagate throughout the entire thickness of cortical bone, are attractive for the early diagnosis of osteoporosis. However, this is challenging due to the impact of soft tissue and the inherent difficulties related to multiparametric inversion of cortical bone quality factors, such as cortical thickness and bulk wave velocity. Therefore, in this research, a UGW-based multi-parameter inversion algorithm is developed to predict strength-related factors. In simulation, a free plate (cortical bone) and a bilayer plate (soft tissue and cortical bone) are used to validate the proposed method. The inversed cortical thickness (CTh), longitudinal velocity (V_L) and transverse velocity (V_T) are in accordance with the true values. Then four bovine cortical bone plates were used in in vitro experiments. Compared with the reference values, the relative errors for cortical thickness were 3.96%, 0.83%, 2.87%, and 4.25%, respectively. In the in vivo measurements, UGWs are collected from the tibias of 10 volunteers. The theoretical dispersion curves depicted by the estimated parameters (V_T, V_L, CTh) match well with the extracted experimental ones. In comparison with dual-energy x-ray absorptiometry, our results show that the estimated transverse velocity and cortical thickness are highly sensitive to osteoporosis. Therefore, these two parameters (CTh and V_T) of long bones have potential to be used for diagnosis of bone status in clinical applications.     

Amplitude modulation excitation for cancellous bone evaluation using a portable ultrasonic backscatter instrumentation

The ultrasonic backscatter (UB) has the advantage of non-invasively obtaining bone density and structure, expected to be an assessment tool for early diagnosis osteoporosis. All former UB measurements were based on exciting a short single-pulse and analyzing the ultrasonic signals backscattered in bone. This study aims to examine amplitude modulation (AM) ultrasonic excitation with UB measurements for predicting bone characteristics. The AM multiple lengths excitation and backscatter measurement (AM-UB) functions were integrated into a portable ultrasonic instrument for bone characterization. The apparent integrated backscatter coefficient in the AM excitation (AIB_AM) was evaluated on the AM-UB instrumentation. The correlation coefficients of the AIB_AM estimating volume fraction (BV/TV), structure model index (SMI), and bone mineral density (BMD) were then analyzed. Significant correlations (|R| = 0.82-0.93, p < 0.05) were observed between the AIB_AM, BV/TV, SMI, and BMD. By growing the AM excitation length, the AIB_AM values exhibit more stability both in 1.0-MHz and 3.5-MHz measurements. The recommendations in AM-UB measurement were that the avoided length (T1) should be lower than AM excitation length, and the analysis length (T2) should be enough long but not more than AM excitation length. The authors conducted an AM-UB measurement for cancellous bone characterization. Increasing the AM excitation length could substantially enhance AIB_AM values stability with varying analyzed signals. The study suggests the portable AM-UB instrument with the integration of real-time analytics software that might provide a potential tool for osteoporosis early screening.     

全戊基部分羟丙基β-环糊精手性固定相的制备与研究

以β-环糊精为母体,制备了一种新型固定相,全戊基2,3,6-三(O-2’羟丙基)-β-CD,研究了该固定相的有关色谱性能,结果表明对许多异构体,特别是对对映异构体具有较好的分离效果。     

Cu2+/TiO2对甲基橙的光催化降解机理

以自制的掺铜离子的混晶型二氧化钛为光催化剂,考察了甲基橙光催化降解过程中pH值和光源的影响,提出了两种不同的光催化降解机理:在高压汞灯照射下,TiO2的价带电子被激发到导带,光生电子和空穴主要通过Cu2+ 的短路循环而复合,光催化剂的活性降低;在太阳光照射下,甲基橙发生自身光敏化氧化反应,受激电子从单线态或三线态的甲基橙分子跃迁到TiO2的导带,Cu2+起到电荷传递中继站的作用,加速了注入电子向H2O2的转移,从而促进了甲基橙的光催化降解。     

A function cascade synchronization method with unknown parameters and applications

This paper investigates the function cascade synchronization of chaos system. Combining cascade synchronization scheme, parametric adaptive control and projective synchronization scheme, it proposes a new function cascade synchronization scheme to address a generalized-type synchronization problem of three famous chaotic systems: the Lorenz system, Liu system and R\"{o}ssler system, the states of two identical chaotic systems with unknown parameters can be asymptotically synchronized by choosing different special suitable error functions. Numerical simulations are used to verify the effectiveness of the proposed synchronization techniques.     

一种电磁带隙结构的快速分析方法

 使用直接传输方法分析有限周期Mushroom-like 电磁带隙结构的表面波带隙,与无限周期的电磁带隙结构表面波色散能带图相比,该方法能大大缩短分析时间。将电磁带隙结构放置于波导底面,通过计算波导的传输系数,分析了不同波导高度和电磁带隙结构周期数对带隙范围的影响。加工了Mushroom-like电磁带隙结构样品,并使用一对探针耦合的方法测量了电磁带隙结构的TE和TM表面波带隙,实验结果表明使用直接传输方法确定的表面波带隙与测量数据吻合良好,证明了此方法的有效性。     

全氟/多氟烷基化合物的光学传感检测研究进展

全氟/多氟烷基化合物（PFAS）是一类重要的新污染物,具有生物毒性、环境持久性、生物累积性等特点,可对环境和生物造成一系列危害。因此,实现PFAS的快速灵敏检测至关重要。光学传感因所需设备简单、响应速度快等优点而被广泛用于PFAS的现场快速检测。本文对比色、荧光、表面增强拉曼、共振光散射、表面等离子体共振等多种光学传感检测PFAS的方法进行了综述,详细介绍了各种传感体系的构建和检测机制,并对其传感性能进行了归纳和比较。最后,对PFAS光学传感检测的未来发展趋势和改进方向进行了展望。