蓄热式热氧化炉固态二次污染物成分分析及形成机理初探

以制药工业企业三床式蓄热式热氧化炉（Regenerative Thermal Oxidizer, RTO）处理VOCs废气工程实例为研究对象,对RTO底部固态二次污染物的主要成分进行了分析,推断了固态二次污染物可能的形成机理,提出了预防性措施。结果表明：该固态二次污染物主要成分为含水率2.87%、三乙胺盐酸盐含量93.37%,邻苯二甲酸含量2.35%,其他1.41%;基于成分分析,推断固态二次污染物（三乙胺盐酸盐）的形成机理可能是由于未参与燃烧反应的三乙胺与含氯有机物经过高温焚烧产生的HCl在进出气室内相遇混合而成;基于固态二次污染物形成机理,提出了对含氯有机物单独收集处理或者采用四床式RTO等预防性措施。     

2-甲基-1-(4-芳基噻唑-2-基)-苯并咪唑-6-甲酸乙酯的合成、表征及生物活性

以4-乙酰氨基苯甲酸乙酯为原料设计合成了14 种2-甲基-1-(4-芳基噻唑-2-基)-苯并咪唑-6-甲酸乙酯新化合物. 化合物结构经质谱、1H NMR、红外光谱和元素分析等确证, 并用单晶X射线衍射仪测定了化合物5a的晶体结构. 生物活性实验结果表明, 化合物5c(500 mg/L)对小麦白粉病菌抑制率达到95%; 化合物5e对辣椒疫霉病菌(25 mg/L)的抑制率为61.9%, 对油菜菌核病菌(500 mg/L) 抑制率高达97.2%; 化合物5k(25 mg/L) 对小麦赤霉病菌抑制率为55.1%.     

高压静电法制备多孔磁性壳聚糖微球

以壳聚糖(Chitosan, CS)为基质, 通过共混法引入四氧化三铁磁性颗粒, 以硅胶(Silicagel, S)为致孔剂, 在热的NaOH溶液中溶出硅胶致孔, 采用高压静电法制备磁性壳聚糖微球. 通过SEM观察了微球的结构和形貌, 并对微球结构和形貌的影响因素及其制备工艺进行了系统的研究, 结果表明, 高压静电法制备的磁性硅胶/壳聚糖微球粒径可通过微量进样器的针头大小来控制, 并且粒径分布均匀, 实验重复性及可控性好; 当以质量体积分数为5%的壳聚糖醋酸溶液(体积分数2％, mS∶mCS=4∶1), 用8号针头进样时, 制得直径约为600 μm, 孔洞分布均匀, 孔径约为50 μm的多孔磁性壳聚糖微球. 由于磁性多孔壳聚糖微球中含有大量的活性羟基和氨基, 因此显弱碱性, 对酸性物质和金属离子的吸附作用很好, 且可通过外加磁场进行有效分离. 磁性多孔壳聚糖微球在生物分离及污水中的酸性染料处理方面具有潜在的应用价值.     

自组装共混制备PEG化基因载体

通过含PEG链段的两亲聚合物的自组装共混, 制备了基于疏水作用力的新型PEG化非病毒基因载体. 分别选用胆固醇-聚乙二醇和聚乙二醇-聚丙二醇-聚乙二醇作为共混改性剂, 研究两亲聚合物的种类对组装体在生理盐溶液中的稳定性及基因转染效率的影响. 结果表明, 疏水驱动力的大小是获得稳定的PEG化基因超分子组装体的关键. 通过对两亲聚合物中疏水链段的选择调控, 可制备稳定的PEG化基因超分子组装体, 提高基因传递体系在生理盐溶液中的稳定性及基因转染效率. 通过自组装共混, 为新型PEG化基因超分子组装体的制备提供了切实可行的新方法.     

短脉冲激光加热模型的遴选原则

 利用推导出的1维半空间光致热弹性应力响应的精确解,对激光与材料相互作用的加热模型的选取进行了研究。理论分析和计算结果表明：常用的表面加热模型只有在热穿透深度远大于光吸收长度时有效,若将其应用于超短脉冲激光（ps以下量级）加热的情况,可能会导致较大的误差;皮秒和飞秒激光辐照的热效应须用体加热模型计算。     

金华火腿微生物研究 Ⅰ火腿微生物的人工接种及缩短生产周期的初步试验

为探索火腿微生物的活动与火腿质量的关系,以及如何缩短生产周期,我们进行了如下工作:火腿微生物的分离及人工接种;模拟缩短生产周期;通过火腿游离氨基酸测定以评定质量.初步试验结果表明:以分离而得的青霉4号菌株接种和以1%苯甲酸钠抑菌的两组质量较好;缩短火腿生产周期的模拟试验有一定成效,由原来的8—10个月缩短到4个月;经火腿的游离氨基酸分析表明,质量与常规生产的相比较无显著差异.     

Electric-stress reliability and current collapse of different thickness SiNx passivated AlGaN/GaN high electron mobility transistors

This paper investigates the impact of electrical degradation and current collapse on different thickness SiNx passivated AlGaN/GaN high electron mobility transistors.It finds that higher thickness SiNx passivation can significantly improve the high-electric-field reliability of a device.The degradation mechanism of the SiNx passivation layer under ON-state stress has also been discussed in detail.Under the ON-state stress,the strong electric-field led to degradation of SiNx passivation located in the gate-drain region.As the thickness of SiNx passivation increases,the density of the surface state will be increased to some extent.Meanwhile,it is found that the high NH 3 flow in the plasma enhanced chemical vapour deposition process could reduce the surface state and suppress the current collapse.     

Crystallization Process of Superlattice-Like Sb/SiO_2 Thin Films for Phase Change Memory Application

After compositing with SiO_2 layers, it is shown that superlattice-like Sb/SiO_2 thin films have higher crystallization temperature(~240°C), larger crystallization activation energy(6.22 e V), and better data retention ability(189°C for 10 y). The crystallization of Sb in superlattice-like Sb/SiO_2 thin films is restrained by the multilayer interfaces. The reversible resistance transition can be achieved by an electric pulse as short as 8 ns for the Sb(3 nm)/SiO_2(7 nm)-based phase change memory cell. A lower operation power consumption of 0.09 m W and a good endurance of 3.0 × 10~6 cycles are achieved. In addition, the superlattice-like Sb(3 nm)/SiO_2(7 nm) thin film shows a low thermal conductivity of 0.13 W/(m·K).     

Trend of extreme precipitation events over China in last 40 years

Using the daily precipitation data of 740 stations in China from 1960 to 2000, the analysis on the variations and distributions of the frequency and the percentage of extreme precipitation to the annual rainfall have been performed in this paper. Results indicate that the percentage of heavy rains （above 25mm/day） in the annual rainfall has increased, while on average the day number of heavy rains has slightly reduced during the past 40 years. In the end of 1970s and the beginning of 1980s, both the number of days with extreme precipitation and the percentage of extreme precipitation abruptly changed over China, especially in the northern China. By moving t test, the abrupt change year of extreme precipitation for each station and its spatial distribution over the whole country are also obtained. The abrupt change years concentrated in 1978-1982 for most regions of northern China while occurred at various stations in southern China in greatly different/diverse years. Besides the abrupt change years of extreme precipitation at part stations of Northwest China happened about 5 years later in comparison with that of the country＇s average.     

水雾红外隐身的冷/热目标效应

人工水雾对抗红外成像制导导弹时,会因为蒸发对流强、辐射热流弱而使水雾形成冷目标;也可能因为辐射热流过强、散热弱而形成热目标。为详细揭示该现象,以Mie理论为基础,通过辐射传递方程和能量守恒方程的耦合计算,建立了水雾红外隐身产生冷目标或热目标效应的数学模型。应用蒙特卡洛法与本文算法作对比,验证了模型的正确性;将水雾视为吸收、发射、各向异性散射介质,考虑水雾自身辐射、多重散射和各种换热过程,比如辐射热流、两相流的热传导、热对流、紊流热扩散以及雾滴蒸发等,反映了水雾热遮蔽所产生的冷/热目标效应。