超重核研究谱仪的RFQ冷却聚束器RFQ1L

介绍了超重核研究谱仪中RFQ冷却聚束器RFQ1L的结构和运用SIMION程序对离子的冷却、聚束、引出和撇气过程的模拟情况。 模拟显示: 通过仔细选择工作点就完全可以把经过充气反冲质量分离器分离后的低品质束流转化为斑点小、发射度小和能量单一的高品质束流, 为紧接其后的磁铁和激光高效率分析提供条件。The structure and the simulation results about the cooling,bunching,extraction and skimming of the RFQ cooler and buncher RFQ1L, which is an important part of the being built super heavy nuclide research spectrometer, have been introduced. It shows that, by careful choice of its working point, we can obtain an ion beam with small beam spot, small emittance and mono energy, which can satisfy the requirements of the successive analyses by dipole and laser with high efficiencies.     

内置垫补线圈的C型二极磁铁

对HIRFL CSR的原形磁铁进行了试制和研究.尝试了一种新的改善磁场分布的方法:在不增大极头的条件下使用两根内置导线,实践证明是可行的.用OPERA 2D和TOSCA 3D软件分析了垫补电流对中、低场的影响,同时也介绍了这块C型二极磁铁的制作工艺及磁场测量结果. The C-type dipole prototypes in the injection beam line from a Separate Sector Cyclotron (SSC) to Cooling Storage Ring (CSR) are selected as R & D for CSR magnets fabrication, because they have large bending angle and small radius, and are very difficult to stack and fabricate. A method to obtain good field homogeneity has been attempted in the C-type dipole prototype. This method is not the enlarged dipole pole but two imbedded conductors and two small power supplies. This is easy operating....     

Enhanced microwave absorption performance of MOF-derived hollow Zn-Co/C anchored on reduced graphene oxide

Composite materials assembled by metal/carbon nanoparticles and 2D layered flakes can provide abundant interfaces, which are beneficial for high-performance microwave absorbers. Herein, Zn-Co/C/RGO composites, composed of Zn-Co metal-organic framework-derived Zn-Co/C nanoparticles and reduced graphene oxide (RGO), were obtained through a facile method. The multilayer structure was due to the introduction of hollow Zn-Co/C nanoparticles in the RGO sheets. Zn-Co/C nanoparticles provided abundant polarization and dipole centers on the RGO surface, which enhanced the microwave absorption abilities. Different concentrations of RGO were introduced to optimize impedance matching. The minimum reflection loss (R_L) of Zn-Co/C/RGO with a thickness of 1.5 mm reached -32.56 dB with the bandwidth corresponding to R_L at -10 dB, which can reach 3.92 GHz, while a minimum R_L of -47.15 dB at 11.2 GHz was also obtained at a thickness of 2.0 mm. The electromagnetic data demonstrate that Zn-Co/C/RGO presented excellent absorption performance and has potential for application in the microwave absorption field.     

双重违约风险下的银企共赢信用机理研究

本文以银企信贷关系为例，考虑主观和客观双重违约风险因素，在多渠道融资模式下得到信贷各方共赢博弈决策模型，并给出博弈均衡解。在此基础上，通过实证分析挖掘出双重信用风险影响下企业融资难问题的根源，给出解决方案。探索性地给出实现信贷系统共赢发展的有效策略集，并提出一定的政策建议。     

阵列波导光栅平坦化的研究

阵列波导光栅的平坦化在实际应用中有很重要的意义.本文系统地研究了阵列波导光栅的平坦化.在输入波导、输出波导、阵列波导输入端与输出端上分别引入了指数型锥形波导.通过改变锥形波导的形状和尺寸来实现平坦化的优化.本文首先从理论上论述了引入指数型锥形波导的输出光谱特性,给出了结构参量的关系表达式,阐明了输入波导处的锥形波导是影响输出光谱平坦化的主要因素,阵列波导和输出波导处的锥形波导对输出光谱的平坦化有一定的影响.其次采用数值模拟的方法模拟了输出光谱,优化了结构参量,总结出了指数型锥形波导对平坦化影响的趋势和规律.模拟结果显示,输出光谱1 dB带宽大于通道间隔的50%,插入损耗从5.2 dB减小到了4.0 dB,串扰小于-30 dB.最后,本文给出了实验结果,插入损耗减小了0.87 dB,串扰减小了3.67 dB,1 dB带宽增加0.1 nm,增加了54.7%.实验结果表明引入指数型锥形波导提高了阵列波导光栅器件的光谱性能.     

一个基于模糊偏好的选择函数

研究了一个基于模糊偏好关系的模糊选择函数。首先对文献中基于普通关系的最好元集所确定的选择函数进行了回顾,并给出了进一步结果。然后,讨论了该选择函数的模糊化形式,给出了基于模糊偏好的选择集确定模糊选择函数的充要条件,同时研究了该选择函数的合理性性质。     

Electromagnetic scattering of the carbon nanotubes excited by an electric line source

An analytical solution is presented for the electromagnetic scattering from an infinite-length metallic carbon nanotube and a carbon nanotube bundle.The scattering field and scattering cross section are predicted using a modal technique based on a Bessel and Hankel function for the electric line source and a quantum conductance function for the carbon nanotube.For the particular case of an isolated armchair (10,10) carbon nanotube,the scattered field predicted from this technique is in excellent agreement with the measured result.Furthermore,the analysis indicates that the scattering pattern of an isolated carbon nanotube differs from that of the carbon nanotube bundle of identical index (m,n) metallic carbon nanotubes.     

低温领域中低温恒温器的研究进展

在低温领域中，低温恒温器是最常用的一种测量样品在低温下性能的实验装置，样品常常需要在低温恒温的情况下，进行各种电学，光学，磁热性能等基础实验.文章深入解析并探究了低温恒温器的概念、组成、分类和结构，描述了低温恒温器的进展状况，并提出了未来恒温器发展的趋势。     

壳聚糖包裹AgInS_2的物理表征及生物毒性研究

选用天然多糖中唯一的碱性多糖——壳聚糖作为稳定剂和包裹剂,成功合成了水溶性的Ag In S2量子点/低分子量壳聚糖纳米复合材料(Ag In S2/LCSMS)。利用透射电子显微镜(TEM)、FT-IR傅里叶红外光谱仪、紫外吸收光谱、荧光分光光度计等表征手段对纳米复合材料的形貌、化学组成及光学性质进行了研究。结果表明,Ag In S2/LCSMS纳米复合材料的粒径约为5~6 nm,在水相中仍具有较稳定的发光。之后,对Ag In S2/LCSMS纳米复合材料的生物相容性进行了研究,对比Ag In S2/LCSMS纳米复合材料与Ag In S2量子点的细胞活性测试结果发现,Ag In S2/LCSMS纳米复合材料的细胞活性比Ag In S2量子点有了明显的提高,说明通过低分子量壳聚糖的包裹可以明显提高纳米材料的生物相容性。因此,这类具有较好水溶性和生物相容性的荧光Ag In S2/LCSMS纳米复合材料可作为优良的生物荧光标记材料在生物医学检验、细胞以及活体成像研究中有广泛的应用前景。     

冷却储存环主环注入线二极磁铁测量

 介绍了兰州重离子加速器冷却储存环工程主环注入线二极磁铁的测磁系统和测磁结果。着重分析了垫补线圈和极头削斜两种手段对C型弯曲二极磁铁积分磁场径向分布均匀度的调节效果。并且分析了TOSCA三维磁场计算程序与实际测量结果之间的误差及其产生的原因。