An optimized,sensitive and stable reduced graphene oxide–gold nanoparticle-luminol-H2O2 chemiluminescence system and its potential analytical application

The chemiluminescence （CL） performance of luminol is improved using reduced graphene oxide/gold nanoparticle （rGO-AuNP） nano-composites as catalyst. To prepare this catalyst, we propose a linker free, one-step method to in- situ synthesize rGO-AuNP nano-composites. Various measurements are utilized to characterize the resulting rGO-AuNP samples, and it is revealed that rGO could improve the stability and conductivity. Furthermore, we investigate the CL signals of luminal catalyzed by rGO-AuNP. Afterwards, the size effect of particle and the assisted enhancement effect of rGO are studied and discussed in detail. Based on the discussion, an optimal, sensitive and stable rGO-AuNP-luminon- H202 CL system is proposed. Finally, we utilize the system as a sensor to detect hydrogen peroxide and organic compounds containing amino, hydroxyl, or thiol groups. The CL system might provide a more attractive platform for various analytical devices with CL detection in the field of biosensors, bioassays, and immunosensors.     

An approach to controlling the fluorescence of graphene quantum dots: From surface oxidation to fluorescent mechanism

We report a facile method of synthesizing graphene quantum dots（GQDs） with tunable emission. The as-prepared GQDs each with a uniform lateral dimension of ca. 6 nm have fine solubility and high stability. The photoluminescence mechanism is further investigated based on the surfacestructure and the photoluminescence behaviors. Based on our discussion, the green fluorescence emission can be attributed to the oxygen functional groups, which could possess broad emission bands within the π –π ＊ gap. This work is helpful to explain the vague fluorescent mechanism of GQDs, and the reported synthetic method is useful to prepare GQDs with controllable fluorescent colors.     

Si基CeO_2薄膜的发光特性

利用电子束蒸发技术在p型硅衬底上沉积了200 nm厚的CeO2薄膜样品,将样品置于弱还原气氛中高温退火后,观察到薄膜在385,418 nm以及445 nm左右出现三个明显的发光峰。结合激发光谱、吸收光谱以及XRD分析表明:CeO2薄膜在高温下容易发生失氧反应,出现Ce4+→Ce3+离子转变,Ce3+离子在紫外光的激发下,电子由O2p跃迁到5d能级,再由5d能级向4f能级跃迁,从而产生强烈的蓝紫外发射,而445 nm左右的发光峰则来自于SiO2薄膜的缺陷发光。样品选择900~1 200℃不同温度退火,并且在1 200℃下进行了不同时间的退火。研究结果显示:在1 200℃下进行2 h的退火,薄膜发光强度达到最大。     

Polymer solar cells based on a PEDOT:PSS layer spin-coated under the action of an electric field

In the process of fabrication of polymer photovoltaic(PV) devices,poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate)(PEDOT:PSS) thin film,acting as an anode buffer layer,is spin-coated under the action of an electric field.The PV devices with a PEDOT:PSS layer spin-coated under the action of a static electric field exhibit improved short-circuit current density(J sc) and power conversion efficiency(PCE).The investigation of morphology shows that the appropriate intensity of the electric field can increase the roughness of the surface of the PEDOT:PSS layer,which results in improved contact between the anode and hole transport layer and thus enhances the J sc of the devices.Chemical analysis is also provided by x-ray photoelectron spectroscopy(XPS) spectra.     

FAAS法测定苦杏仁和甜杏仁中的13种金属元素

采用硝酸、高氯酸(V/V=4/1)常压微沸条件下消解苦杏仁和甜杏仁样品,火焰原子吸收法测定苦杏仁和甜杏仁中的金属元素:Mn、Ca、K、Mg、Na、Zn、Cu、Fe、Co、Cd、Ni、Pb、Cr的含量,研究了测定不同元素仪器的最佳工作条件、方法的准确度和精密度.结果表明:苦杏仁中Mn、Ca、K、Mg、Na、Zn、Cu、Fe、Co、Cd、Ni和Pb的含量分别为11.756,1614.167,5153.191,238.478,97.668,274.836,16.844,546.316,9.952,3.474,5.979,2.143μg·g-1Cr未检出,方法回收率(n=9)在97.32%-102.57%之间,RSD(n=9)在0.14%-2.22%之间;甜杏仁中Mn、Ca、K、Mg、Ni、Zn、Cu、Fe、Co、Cd、Ni和Pb的含量分别为6.622,1937.503,8663.824,216.956,257.546,77.961,12.483,372.183,7.990,3.666,2.268,3.214μg·g-1Cr未检出,方法回收率(n=9)在97.23%-102.43%之间,RSD(n=9)在0.47%-2.14%之间.该法快速,简单,准确度和精密度均较高,能达到分析要求.     

对硅片上自组装生长的Pentacene薄膜生长机制及其结晶相态的研究

采用热蒸发的方法在硅片衬底上自组装生长的Pentacene薄膜,薄膜在80℃温度下经2 h恒温真空热处理,通过原子力显微镜(AFM)对Pentacene薄膜表面形貌及其生长机制进行研究.结果得到,在硅片上生长的Pentacene薄膜足以台阶岛状结构生长,其岛状直径约为100 nm.且Pentacene分子以垂直于衬底的方向生长,台阶岛状结构中每个台阶的平均高度约为1.54 nnl·s-1,与Pentacene分子的沿长轴方向的长度相近.从Pentacene薄膜的XRD图谱中可以看出,薄膜在形成的过程中会因条件的不同而形成不同的结晶相,分别为薄膜相和三斜体相,且薄膜的结晶相将随着薄膜厚度的增加向三斜体相转变,其临界厚度为80和150 nm,当薄膜大于150 nm时,薄膜的三斜体相占主导地位,而当Pentacene薄膜的厚度小于80 nm时,Pentacene薄膜呈薄膜相存在.     

催化共振光散射法测定痕量亚硝酸根

根据磷酸中亚硝酸根对溶解O2氧化I^-生成I3^-的反应具有明显催化作用,I3^-与结晶紫结合使共振光散射（RLS）增强,建立了测定痕量NO2^-的催化共振光散射法。考察了体系RLS强度的影响因素,优化了反应条件。最大RLS峰位于690．6nm波长处,NO2^-的浓度在2．20～340μg／L范围内与RLS强度增强值呈良好的线性关系,方法检出限为0．68μg／L。用于环境水样中NO2^-测定,与文献方法对照结果满意。     

非齐次树上m重非齐次马氏链的若干强极限定理

树指标随机过程已成为近年来发展起来的概率论的研究方向之一.强极限定理一直是国际概率论界研究的中心课题之一.研究给出了一类非齐次树上m重非齐次马氏链的若干强极限定理.     

阴离子表面活性剂—溴化十二烷基二甲基苄基铵—溴百里酚蓝显色反应…

本文研究了溴化十二烷基二甲基苄铵－溴百里酚蓝与阴离子表面活性剂显色反应的适宜条件结果表明，在ｐＨ７．４～８．２范围内阴离子表面活性剂与题示试剂形成１：２：１的绿色离子缔合物，其最大吸收峰位于６１４ｎｍ处。表观摩尔吸光系数分别为ε＾ＳＤＢＳ６１４＝３．９９×１０＾４Ｌ．ｍｏｌ＾－１．ｃｍ＾－１；ε＾ＳＤＳ６１４＝３．７０×１０＾４Ｌ．ｍｏｌ＾－１．ｃｍ＾－１，ε＾ＳＬＳ６１４＝１．７１×１０＾４Ｌ．     

巧用二次函数，突破数列最值问题

数列是高中数学的重点与难点.数列最值问题是各类测试的常考点.求数列最值的方法因题而异,其中二次函数法是求解数列最值问题的常用方法.为提高数列最值问题求解效率,应提高二次函数应用意识,借助二次函数性质、图象特点,顺利寻找到解题切入点.