苯氨基甲酸甲酯分解催化剂Bi-Zn复合氧化物的制备及其催化性能

采用共沉淀法制备了一系列Bi-Zn复合氧化物催化剂并将其用于催化苯氨基甲酸甲酯(MPC)分解制备苯基异氰酸酯(PI).用热重、X射线衍射和傅里叶变换红外光谱考察了Bi/Zn摩尔比和焙烧温度对催化剂物相结构和表面性质的影响.结果表明,Zn的加入使Bi_2O_3由α晶相转变为活性更高的β晶相,500℃焙烧时Bi-Zn前驱体分解较为完全,析出Bi_2O_3粒子的同时伴生较多Bi_(7.65)Zn_(0.35)O_(11.83)晶相.在Bi/Zn摩尔比为2/1,焙烧温度为500℃条件下制得的催化剂活性最高,此时MPC转化率为86.O%,PI选择性为91.7%,优于单独使用Bi_2O_3时的催化性能.     

杂多酸盐催化合成碳酸丙烯酯

以杂多酸盐为催化剂,尿素(1)和1,2-丙二醇(2)为原料合成了碳酸丙烯酯.考察了不同杂多酸盐的催化活性和影响反应的因素.较适宜的反应条件为: 1 500 mmol, n(1) ∶ n(2)=1 ∶ 2, w(钨硅酸锌)=2.0%,于165 ℃反应6 h,收率97.32%.硅钨酸锌重复使用5次后,收率仍高于90%.     

三亚甲基碳酸酯基响应性脂肪族聚碳酸酯的研究进展

脂肪族聚碳酸酯是一类可生物降解、生物相容性的材料,在生物医药方面引起广泛关注。两亲性脂肪族聚碳酸酯聚合物中,聚碳酸酯部分凭借其疏水性能处于胶束内核部位,且该部分通过物理包覆、化学键合等方式使聚合物与药物相结合,提升了响应环境下药物运输与释放的方式与能力。因此,本工作对近年来响应性脂肪族聚碳酸酯的研究进展进行了综述,主要阐述了具有外环境刺激响应(pH、光、温度和氧化还原)脂肪族聚碳酸酯的合成、响应原理、在药物传递和释放方面的应用。     

Adaptive and optimal detection of elastic object scattering with single-channel monostatic iterative time reversal

In active sonar operation,the presence of background reverberation and the low signal-to-noise ratio hinder the detection of targets.This paper investigates the application of single-channel monostatic iterative time reversal to mitigate the difficulties by exploiting the resonances of the target.Theoretical analysis indicates that the iterative process will adaptively lead echoes to converge to a narrowband signal corresponding to a scattering object’s dominant resonance mode,thus optimising the return level.The experiments in detection of targets in free field and near a planar interface have been performed.The results illustrate the feasibility of the method.     

高职生化学实验意识的调查及分析

实验教学,除了加强学生的基本操作技能外,更要培养学生的实验意识,只有把实验操作能力和实验意识结合起来,才能更好地培养学生的实验能力。通过对09级高职制剂4个班级学生进行问卷调查,探查高职生的化学实验意识,为今后的化学实验教学提供参考。     

Characteristics of xenon-lamp pumped pyrromethene 567-doped dye laser based on polymethylmethacrylater

The solid-state medium containing pyrromethene 567 (PM567) in a polymethylmethacrylate polymer host is shown to lase under the flash lamp excitation. The experimental setup is an ordinary industrial product without special design. The bulk transmission losses, the output energy, and the other lasing properties are compared. The medium with the lowest transmission loss, measured to be 0.392 %/cm at 633 nm, gives a laser output of 130 mJ with a slope efficiency of 0.082%.     

数值模拟抽运分布对端泵激光器晶体热透镜球差的影响

为了研究端面抽运情况下,激光晶体在不同分布的抽运光抽运时热透镜球差的变化,通过对稳态热传导方程和Zernike多项式的求解,建立了热透镜球差与抽运光强度分布的模型,对模型进行了理论分析和仿真研究,并对仿真结果做了进一步理论和仿真分析.结果表明:在相同的抽运功率下,二阶超高斯分布抽运光抽运时球差最大,且随着抽运分布系数k的增大(除高斯分布外)球差逐渐减小;随着抽运功率的增加,抽运分布系数k对球差的影响逐渐加重,且不同分布系数k所产生的球差差距逐渐增大;并对二阶超高斯分布抽运光抽运得到最强激光功率的照射范围进行了理论分析和仿真分析,得知在相同抽运功率下,二阶超高斯分布抽运光得到最强激光功率的范围最宽为0.30—0.63倍高斯半径.     

LiNbO3负极薄膜电化学性能及全固态薄膜锂离子电池应用

全固态薄膜锂离子电池具有易微型化与集成化等优点,因此,非常适合为微系统供电。负极对全固态薄膜锂离子电池的性能有重要影响。现有电池通常采用金属锂作为负极,然而其枝晶生长问题及低的热稳定性限制了相应电池在工业、军事等高温、高安全场合应用。为此,本文系统研究了LiNbO₃薄膜的电化学性能,结果表明:LiNbO₃薄膜呈现高比容量(410.2 mAh·g^-1)、高倍率(30C时比容量80.9 mAh·g^-1)和长循环性能(2000圈循环后的容量保持率为100%),以及高的室温离子电导率(4.5×10^-8 S·cm^-1)。在此基础上,基于LiNbO3薄膜构建出全固态薄膜锂离子电池Pt|NCM523|LiPON|LiNbO₃|Pt,其展现出较高的面容量(16.3μAh·cm^-2)、良好的倍率(30μA·cm^-2下比容量1.9μAh·cm^-2)及长循环稳定性(300圈循环后的容量保持率...     

Microwave absorption properties regulation and bandwidth formula of oriented Y2Fe17N3-δ@SiO2/PU composite synthesized by reduction-diffusion method

As concepts closely related to microwave absorption properties, impedance matching and phase matching were rarely combined with material parameters to regulate properties and explore related mechanisms. In this work, reduction-diffusion method was innovatively applied to synthesize rare earth alloy Y$_{2}$Fe$_{17}$. In order to regulate the electromagnetic parameters of absorbers, the Y$_{2}$Fe$_{17}$N$_{3-\delta }$ particles were coated with silica (Y$_{2}$Fe$_{17}$N$_{3-\delta }$@SiO$_{2}$) and absorbers with different volume fractions were prepared. The relationship between impedance matching, matching thickness, and the strongest reflection loss peak (${\rm RL}_{\rm min}$) was presented obviously. Compared to the microwave absorption properties of Y$_{2}$Fe$_{17}$N$_{3-\delta }$/PU absorber, Y$_{2}$Fe$_{17}$N$_{3-\delta }$@SiO$_{2}$/PU absorbers are more conducive to the realization of microwave absorption material standards which are thin thickness, light weight, strong absorbing intensity, and broad bandwidth. Based on microwave frequency bands, the microwave absorption properties of the absorbers were analyzed and the related parameters were listed. As an important parameter related to perfect matching, reflection factor ($\sqrt {ărepsilon_{\rm r}/\mu_{\rm r}}$) was discussed combined with microwave amplitude attenuation. According to the origin and mathematical model of bandwidth, the formula of EAB (${\rm RL}<-10$ dB) was derived and simplified. The calculated bandwidths agreed well with experimental results.     

碳酸二甲酯和乙酸苯酯合成碳酸二苯酯MoO3催化剂的失活研究

利用直接焙烧法在400℃焙烧(NH4)6MoO7O24.4H2O制备了碳酸二甲酯(DMC)与乙酸苯酯(PA)酯交换合成碳酸二苯酯(DPC)反应的正交晶系MoO3催化剂,通过比表面积(BET)、X射线衍射(XRD)、X射线光电子能谱(XPS)、傅立叶变换红外光谱(FT-IR)、扫描电镜(SEM)等技术,对MoO3催化剂在失活前后的结构和形貌进行了分析,探讨了MoO3催化剂的失活行为.结果表明,正交晶系MoO3的(021)、(110)晶面有利于酯交换反应,多次使用后,催化剂表面有无定形碳的物理沉积,催化剂比表面积降低,催化剂颗粒长径比发生了改变,催化剂(021)、(110)晶面衍射峰强度减弱,进而导致了MoO3催化剂的失活.