工科物理课程建设与综合改革

工科物理课程建设与综合改革易丽莎，李天应，汤钧民，唐光荣，肖育英（华中理工大学物理系，武汉４３００７４）工科物理课程（包括理论与实验两部分）是工科所有专业必修的重要基础课。由于物理学的基本原理和实验方法渗透到一切科学领域，因此物理课程的教学质量对科技...     

ADSORPTION BEHAVIOR OF AMINO ACIDS ON COPPER SURFACES

The major results of a series of our recent investigations on the adsorption of eight amino acids on Cu(001) and (111) surfaces are reviewed in the present paper. In all studied cases the molecules adsorb onto the surface in their anionic form. With the increase of the coverage three different 2D phases of the adsorbates, that is, the 2D lattice gas, intermediate, and solid phases, appear sequentially, although for few systems one or two of them do not appear. In both the 2D lattice gas and intermediate phases the molecules "stand" with their two oxygen "feet" on the surface and the intermolecular interactions are repulsive, although in the former they can diffuse frequently whereas in the latter they are discommensurate in one direction with the substrate. In the solid phase the molecules "lie" down on the surface to form commensurate superstructures. Adsorption of amino acids may often induce step faceting as well as bunching to form facets. Adsorption of L-lysine on Cu(001) may cause steps bunching to form facets with all the same chirality. Our preliminary results show that it is possible to manipulate individual molecules with the STM tip even at room temperature. These results may have applications in nano-materials, nano-technology, and very likely also in chiral separations or enantioselective heterogeneous catalysis.     

碳酸二甲酯和乙酸苯酯合成碳酸二苯酯MoO3催化剂的失活研究

利用直接焙烧法在400℃焙烧(NH4)6MoO7O24.4H2O制备了碳酸二甲酯(DMC)与乙酸苯酯(PA)酯交换合成碳酸二苯酯(DPC)反应的正交晶系MoO3催化剂,通过比表面积(BET)、X射线衍射(XRD)、X射线光电子能谱(XPS)、傅立叶变换红外光谱(FT-IR)、扫描电镜(SEM)等技术,对MoO3催化剂在失活前后的结构和形貌进行了分析,探讨了MoO3催化剂的失活行为.结果表明,正交晶系MoO3的(021)、(110)晶面有利于酯交换反应,多次使用后,催化剂表面有无定形碳的物理沉积,催化剂比表面积降低,催化剂颗粒长径比发生了改变,催化剂(021)、(110)晶面衍射峰强度减弱,进而导致了MoO3催化剂的失活.     

强光场中原子的电离速率

以静态场隧道电离为基础,在准静态近似的条件下,对描述强光场中原子及其各阶离子电离的电离速率进行了较为系统的总结,纠正了早期对隧道电离的电离速率公式进行讨论并且后来的计算中被广泛引用的文献「１０」中公式的错误,地部分稀有气体原子及其各了子在线偏振、圆偏振强光场中的了速度及相应的阈值光强进行了比较。     

耐水钛系催化剂的合成及其在聚对苯二甲酸丁二醇酯合成中的应用

以钛酸四丁酯、柠檬酸或乳酸和氢氧化钾为原料在水中合成了一系列α-羟基酸钛催化剂,¹³C NMR、HR-MS(ESI)和元素分析表征。结果表明：α-羟基酸钛催化剂主要含柠檬酸或乳酸的α-羟基和α-羧基与钛离子形成的五元螯合环三配体配合物。其中,采用柠檬酸与TBT在氢氧化钾参与条件下制得的CTK-312催化剂,能够合成特性粘度高达1.268 dL·g^-1的PBT。     

新显色剂对羧基苯基重氮氨基偶氮苯的合成及与镉显色反应的研究

本文报道了新色剂对羟基苯基重氮氨基偶氮苯的合成。     

酚醛——橡胶型粘合剂

前言粘合剂的用途是非常广泛的,可以用它来粘接金属和非金属的材料。但由于其使用范围和要求的不同,目前已从有机粘合剂发展到半无机的和无机粘合剂。无机粘合剂虽能耐超高温,但由于它本身的脆性和聚合物分子的难溶性,使它在使用上受到了限制。因此在许多工业上有机粘合剂的地位仍然是极其重要     

AROMATIC AND HETEROCYCLIC DINITRILES AND THEIR POLYMERS ⅪⅤ. STUDY ON THE CATALYSTS OF THE POLYMERIZATION OF AROMATIC NITRILES*

Various catalysts for the polymerization ot aromatic nitriles were investigated. It was found that Lewis acid-metal is a preferable catalyst system for the polymerization of aromatic nitriles, and the polymerization rate is about 10 times faster than Lewis acid alone. The polymerization rate of benzonitrile catalyzed by Lewis acid and different metals was measured, and the activity of metals was in the following decreasing order ,magnesium, zinc, sodium, calcium. Furthermore, the polymerization of benzonitrile catalyzed by different Lewis acid and zinc was also investigated.     

杂多酸盐催化合成碳酸丙烯酯

以杂多酸盐为催化剂,尿素(1)和1,2-丙二醇(2)为原料合成了碳酸丙烯酯.考察了不同杂多酸盐的催化活性和影响反应的因素.较适宜的反应条件为: 1 500 mmol, n(1) ∶ n(2)=1 ∶ 2, w(钨硅酸锌)=2.0%,于165 ℃反应6 h,收率97.32%.硅钨酸锌重复使用5次后,收率仍高于90%.     

MoO3催化碳酸二甲酯与乙酸苯酯合成碳酸二苯酯

采用焙烧法制备了MoO3催化剂并将其用于碳酸二甲酯(DMC)与乙酸苯酯(PA)合成碳酸二苯酯(DPC)反应,考察了焙烧温度对催化荆性能的影响,并用X射线衍射(XRD)对催化剂结构进行了表征.结果发现,在400或500℃焙烧的催化剂具有良好的催化性能,DMC转化率为73.9%,DPC和甲基苯基碳酸酯的选择性分别为39.5%和56.5%.XRD结果表明,该催化剂物相组成为正交晶系MoO3,且(021)或/和(110)晶面有利于酯交换反应.催化剂使用5次后DMC转化率从73.9%降至10.2%,多次重复使用后的催化剂在窄气气氛中于400或500℃焙烧即可再生,再生后催化剂的性能几乎和新鲜催化剂相当.