宽温域蓝相液晶材料

蓝相常在高手性液晶体系的清亮点附近温度区间出现,由于具有优异的光学特性如无双折射现象和选择性反射可见光等,近年来蓝相在光电和光子领域越来越受到人们的关注。本文综述了蓝相的发现、分子排列和光学特性等,详细介绍了宽温域蓝相液晶材料在国内外的研究进展和应用现状。最后分析了蓝相液晶用于平板显示领域在技术方面存在的主要问题和未来发展方向。     

第1届亚洲物理奥林匹克竞赛热学与电学综合实验题解答及分析

介绍了第1届亚洲物理奥林匹克竞赛热学与电学综合实验题及其解答,并分析了该实验题的设计思想、特点与要求.     

激光诱导等离子体光谱用于煤中氧的定量分析

利用激光诱导等离子体光谱(LIPS)技术实现对燃煤电厂输煤管中煤质的在线检测对于提高锅炉燃烧效率具有重要的现实意义,但对煤中氧含量的测量却是个难题.提出了一种新的数据处理方法,主要包括内标法、最佳分析线选择法、温度校正法及多线法等,来提高对煤中氧含量定量分析的准确性和重复性.实验中先通过8组煤样获得了煤中氧的定标方程,然后又利用其它6组煤样来验证该定标方程的准确性.实验结果表明,利用本数据处理方法对煤中氧含量测量的绝对误差小于1.1 %,多次测量的相对标准偏差(RSD)小于5.9%,显示了较高的测量精度和重复性.     

Ru thickness-dependent interlayer coupling and ultrahigh FMR frequency in FeCoB/Ru/FeCoB sandwich trilayers

The antiferromagnetic (AFM) interlayer coupling effective field in a ferromagnetic/non-magnetic/ferromagnetic (FM/NM/FM) sandwich structure, as a driving force, can dramatically enhance the ferromagnetic resonance (FMR) frequency. Changing the non-magnetic spacer thickness is an effective way to control the interlayer coupling type and intensity, as well as the FMR frequency. In this study, FeCoB/Ru/FeCoB sandwich trilayers with Ru thickness ($t_{\rm Ru}$) ranging from 1 Å to 16 Å are prepared by a compositional gradient sputtering (CGS) method. It is revealed that a stress-induced anisotropy is present in the FeCoB films due to the B composition gradient in the samples. A $t_{\mathrm{Ru}}$-dependent oscillation of interlayer coupling from FM to AFM with two periods is observed. An AFM coupling occurs in a range of $2 {\rm Å} \le t_{\rm Ru} \le 8 {\rm Å}$ and over 16 $\mathrm{Å}$, while an FM coupling is present in a range of $t_{\rm Ru}< 2$ Å and $9 {\rm Å} \le t_{\rm Ru} \le 14.5 Å$. It is interesting that an ultrahigh optical mode (OM) FMR frequency in excess of 20 GHz is obtained in the sample with ${t}_{\mathrm{Ru}}= 2.5 \mathrm{Å}$ under an AFM coupling. The dynamic coupling mechanism in trilayers is simulated, and the corresponding coupling types at different values of $t_{\mathrm{Ru}}$ are verified by Layadi's rigid model. This study provides a controllable way to prepare and investigate the ultrahigh FMR films.     

A novel sensitivity model for short nets

For modern processes at deep sub-micron technology nodes, yield design, especially the design at the layout stage is an important way to deal with the problem of manufacturability and yield. In order to reduce the yield loss caused by redundancy material defects, the choice of nets to be optimized at first is an important step in the process of layout optimization. This paper provides a new sensitivity model for a short net, which is net-based and reflects the size of the critical area between a single net and the nets around it. Since this model is based on a single net and includes the information of the surrounding nets, the critical area between the single net and surrounding nets can be reduced at the same time. In this way, the efficiency of layout optimization becomes higher. According to experimental observations, this sensitivity model can be used to choose the position for optimization. Compared with the chip-area-based and basic- layout-based sensitivity models, our sensitivity model not only has higher efficiency, but also confirms that choosing the net to be optimized at first improves the design.     

Turbulence mitigation scheme based on multiple-user detection in an orbital-angular-momentum multiplexed system

Atmospheric turbulence(AT) induced crosstalk can significantly impair the performance of a free-space optical(FSO)communication link using orbital angular momentum(OAM) multiplexing.In this paper,we propose a multiple-user detection(MUD) turbulence mitigation scheme in an OAM-multiplexed FSO communication link.First,we present a MUD equivalent communication model for an OAM-multiplexed FSO communication link under AT.In the equivalent model,each input bit stream represents one user's information.The deformed OAM spatial modes caused by AT,instead of the pure OAM spatial modes,are used as information carriers,and the overlapping between the deformed OAM spatial modes are computed as the correlation coefficients between the users.Then,we present a turbulence mitigation scheme based on MUD idea to enhance AT tolerance of the OAM-multiplexed FSO communication link.In the proposed scheme,the crosstalk caused by AT is used as a useful component to deduce users' information.The numerical results show that the performance of the OAM-multiplexed communication link has greatly improved by the proposed scheme.When the turbulence strength C_n~2 is 1 × 10~(-15) m~(-2/3),the transmission distance is 1000 m and the channel signal-to-noise ratio(SNR)is 26 dB,the bit-error-rate(BER) performance of four spatial multiplexed OAM modes l_m = + 1,+2,+3,+4 are all close to 10~(-5),and there is a 2-3 fold increase in the BER performance in comparison with those results without the proposed scheme.In addition,the proposed scheme is more effective for an OAM-multiplexed FSO communication link with a larger OAM mode topological charge interval.The proposed scheme is a promising direction for compensating the interference caused by AT in the OAM-multiplexed FSO communication link.     

一种新型Ca3Mg3Si4O14:Eu2+绿色荧光粉的制备及其性能研究

采用CaCO3,MgO,SiO2,Eu2O3原料,通过高温固相法制备了Ca3Mg3Si4O14:Eu2+荧光粉.通过XRD图谱和PL光谱图,研究了Eu的掺杂浓度与助溶剂(NH4Cl,BaF2)对Ca3Mg3Si4O14:Eu2+荧光粉结构、发光性能和热稳定的影响.XRD图谱对比结果表明,制备的Ca3Mg3Si4O14:Eu2+荧光粉XRD图与理论计算得到的图谱几乎一致.Ca3Mg3Si4O14:Eu2+荧光粉在360～450 nm有很强的激发强度,并且在440 nm激发下发射峰值波长为530 nm的发射光.随着Eu2+离子浓度的增加,发射光谱出现了红移,且在Eu2+离子浓度约为6％时发生了浓度猝灭现象.当添加NH4Cl和BaF2作为助溶剂,Ca3Mg3Si4O14:Eu2+荧光粉的发光强度有一定提高.与未添加助溶剂的Ca3Mg3Si4O14:Eu2+荧光粉的发光强度相比,添加NH4Cl助溶剂后发光强度增加了70％.此外,当温度升高至150 ℃时,Ca3Mg3Si4O14:Eu2+荧光粉和商用绿色荧光粉的发光强度分别降低了7.6％和14％,表明Ca3Mg3Si4O14:Eu2+荧光粉具有良好的热稳定性.这些发光性能均表明Ca3Mg3Si4O14:Eu2+荧光粉是是一种可应用于固态照明的有前景的绿色荧光粉.     

碳热还原法合成LaSi_3N_5∶Ce~(3+)蓝色荧光粉及其发光性能研究

利用碳热还原法制备了LaSi_3N_5∶Ce~(3+)蓝色荧光粉,重点研究了原料中掺C量和退火对样品纯度及发光性能的影响。通过X射线衍射仪和荧光光谱仪分别表征样品的晶体结构和发光性能。研究结果表明:1 600℃时能够合成主相为LaSi_3N_5∶Ce~(3+)的荧光粉。在360nm紫外光激发下样品可获得波段范围在380~600nm的单峰宽带发射谱,归结于Ce~(3+)的5d-4f的能级跃迁。当n_C/n_(La)=4/1时样品发光强度达到最大,并且光谱出现先红移后蓝移的现象。经过退火的样品的发光强度与退火前相比提高了60%~345%。将热处理后的n_C/n_(La)=4/1的样品与商用YAG混合涂覆在UV芯片上(λ_(em)=365nm)封装成WLED,证实了LaSi_3N_5∶Ce~(3+)在白光LED领域潜在的应用价值。     

CdS/ZnO纳米复合结构制备及荧光特性研究

为增强CdS纳米粒子的荧光强度,以及稳定性,研究了Cd,S不同质量比,有无稳定剂等条件下CdS纳米粒子的制备及荧光特性。在碱性条件下,利用水热法合成了CdS/ZnO的纳米复合结构,并对所有样品进行了XRD、荧光光谱和SEM表征。测试结果表明所制备的CdS纳米粒子和CdS/ZnO的纳米复合结构粒子成分单一且纯净;ZnO复合在CdS表面;在紫外光(328.5 nm)激发下,CdS/ZnO纳米复合结构的发射峰位于463 nm处,峰形窄而对称,CdS/ZnO纳米复合结构的荧光强度比CdS纳米粒子的荧光强度有显著增强,且CdS和ZnO物质量之比为1∶1条件下,荧光强度最高,其荧光效率比单一CdS纳米粒子高出11%。通过第一性原理计算结果表明,CdS能带结构中,Cd-4d,S-3p和Cd-5s能带分别由5条、3条和1条能级构成,对比不同轨道的分态密度强度,看出CdS的导带边主要由Cd-5s轨道贡献,而价带边主要由S-3p轨道贡献,能量在-7 eV附近的电子态主要由Cd-4d轨道贡献。而ZnO上价带主要由O-2p电子构成,靠近费米能级的价带区域则主要由Zn-3d电子贡献,在导带部分,主要来源于Zn-4s和O-2p电子。由于在两种材料的复合结构中Zn-3d电子的能级和S-3p电子的能级接近,存在着二型带阶结构使能带变窄,容易形成跃迁,减小电子-空穴的复合,从而促进复合结构荧光效率的提高。     

双冗余架构下的液冷机柜设计及性能分析

本研究以冷却对象的制冷量、供水温度以及结构尺寸等技术要求,提出了一种双冗余架构下的液冷机柜设计方案。结合各制冷零部件的安装尺寸,采用将制冷部件全部集成在3个19英寸机柜内的设计策略,且3个机柜互相拼装的结构特点。3个机柜分为：“1#制冷柜”、“2#制冷柜”和“供水柜”。其中,2个制冷柜以“镜像相同”和“冗余备份”的方式提供不低于45 kW的制冷量,供水柜则通过2台水泵“冗余备份”的方式为冷冻水提供循环动力。通过对液冷机柜的工作原理、结构布局以及控制过程的着重设计。实现了液冷机柜“1#制冷柜”和“2#制冷柜”在海水换热模式下的制冷量分别为46 kW和46.2 kW;在压缩制冷模式下的制冷量为48.8 kW和49.1 kW。