传感器驱动下双路视频采集与处理系统的实现

传统的视频采集使用连续录制的方式,一方面对存储需求较大,另一方面造成视频检索困难。针对这一问题,提出并实现了一种基于传感器驱动的视频采集和处理系统。系统以震动传感器和人体红外传感器作为触发器,实现对视频采集设备的驱动,并将获取的双路视频图像采用PIP技术进行处理。实验证明,这样做不仅能有针对性地获取视频信息,提高视频信息的可用性,而且可以扩大视频信息采集范围,节省存储空间。     

基于光谱特征分析的光纤光栅腐蚀传感器研究

针对航空航天领域铝合金结构服役过程腐蚀监测需求,提出了一种基于铝质细管结构的预载荷型光纤光栅腐蚀传感器。给出了铝合金结构腐蚀在役监测机理,得到光纤光栅反射光谱特征与铝质细管厚度变化之间的理论关系模型,构建了酸碱环境下的光纤光栅腐蚀监测试验系统。通过在细管内部配置不受力且仅感受温度变化的光纤光栅传感器,解决了被测目标的温度与应力交叉敏感问题。研究表明,这种铝质细管封装设计不仅可以感受腐蚀对其力学性能的影响,还能够屏蔽外界腐蚀因素对管内光纤感知器件的干扰。随着金属管腐蚀程度加深,其管壁逐渐变薄,光纤光栅反射光谱逐渐向短波长方向偏移,且管壁厚度变化与光栅中心波长偏移量之间呈较好单调关系。这些特性能够为进一步开展基于光纤感知器件的机械结构在役腐蚀监测研究提供有益帮助。     

Speckle reduction by selective spatial-domain mask in digital holography

An improved method of using a selective spatial-domain mask to reduce speckle noise in digital holography is proposed.The sub-holograms are obtained from the original hologram filtered by the binary masks including a shifting aperture for being reconstructed. Normally, the speckle patterns of these sub-reconstructed images are different. The speckle intensity of the final reconstructed image is suppressed by averaging the favorable sub-reconstructed images which are selected based on the most optimal pixel intensity sub-range in the sub-holograms. Compared with the conventional spatial-domain mask method, the proposed method not only reduces the speckle noise more effectively with fewer sub-reconstructed images,but also reduces the redundant information used in the reconstruction process.     

稀土配合物的配体PNIPAM塌缩诱导配位键断裂

通过一系列化学反应合成得到了Eu(ally-DBM)₃-2TPPO和PNIPAM形成的大分子水溶性发光配合物. 本文通过TGA、GPC、HNMR表征复合物的结构,并研究了配合物在水溶液中的荧光热响应性. 研究发现,PNIPAM在低临界溶解温度以上塌缩引起配位键断裂,导致Eu³⁺的荧光减弱和配体荧光增强. 当温度降低时,发现Eu³⁺的荧光增强,配体荧光相应减弱. 推断当温度降低时配体再次与铕离子重新配位,并通过红外光谱进一步证实了. 这种配合物的荧光热响应性具有可逆性,可用作分子探针应用在生物成像方面和研究PNIPAM塌缩.     

铜铟镓硒薄膜的拉曼和可见-近红外光谱表征

采用恒电位电沉积法在ITO上制备了铜铟镓硒(CIGS)前驱体薄膜,该前驱体薄膜在充氩气管式炉中经过高温硒化可得到结晶良好的CIGS薄膜。采用X-射线衍射(XRD)、拉曼光谱(Raman)、扫描电子显微镜(SEM)和紫外-可见光-近红外光谱仪分别表征了CIGS薄膜的结构、形貌、成分以及可见-近红外光谱(Vis-NIR)吸收特性。XRD结果表明前驱体薄膜高温硒化后所得的CIGS薄膜具有(112)择优取向,薄膜中CIGS晶粒的平均尺寸为24.7nm,Raman光谱表明薄膜中的CIGS是具有黄铜矿结构的四元纯相,没有其他二元三元杂相存在。Vis-NIR测量结果表明CIGS的禁带宽度随薄膜中镓含量的增加而增加,当Ga含量达5.41%时,通过吸收光谱测得CIGS的禁带宽度为1.11eV,通过理论计算得到镓铟比为Ga/(In+Ga)=16.3%,小于SEM测量所得的镓铟比Ga/(In+Ga)=21.4%,这表明还需进一步提高CIGS薄膜的结晶度。所有测量表明优化后的ITO/CIGS非常适合用来制作高质量的双面太阳能电池。该研究提出了制备低成本CIGS前驱体薄膜及高温硒化的新方法,通过这些方法在ITO上制备了均匀、致密、附着力好的CIGS薄膜。通过上述表征可知,在新工艺下制备的CIGS薄膜结晶度高,成分合理,无杂相,光吸收性质好。与磁控溅射法类似,电沉积法非常适合大面积工业化生产,该工作对CIGS的规模化生产具有重要的借鉴意义。     

基于光纤SPR光谱分析的污水降解过程监测研究

讨论了光纤表面等离子体波传感器的工作原理,并对将其用于监测以甲基橙为代表的环境污水降解过程的可行性进行了探讨。用光纤SPR传感器监测了50 mL初始浓度为30 mg·L-1的甲基橙原溶液在降解过程浓度的变化,对降解过程中光纤SPR传感器的光谱进行了详细的分析;同时采用紫外-分光光度计对降解过程中溶液浓度的变化进行了监测,并对2种方法所测的数据进行了分析对比。结果表明,光纤SPR同常规方法的测量结果一致,随着降解时间的增加,甲基橙溶液的吸光度和浓度逐渐减小,光纤SPR传感器的共振波长逐渐发生蓝移,同初始标定的甲基橙原溶液共振光谱比较,说明甲基橙逐渐被降解,且在2 h内降解率达到73%,说明用光纤SPR传感器监测污水降解过程是完全可行的。研究结果不仅为环境污水降解过程提供了一种新的监测方法,同时促进了我国SPR传感技术与环保监测研究结合,为光纤SPR技术走向实用,并最终实现产业化积累了经验。     

紫杉醇水凝胶成胶因子延缓微管蛋白聚集

Paclitaxel (PTX) is one of the most efficient anticancer drugs for the treatment of cancers through β-tubulin-binding. Our previous work indicated that a PTX-derivative hydroge-lator Fmoc-Phe-Phe-Lys(paclitaxel)-Tyr(H₂PO₃)-OH (1)could promote neuron branching but the underlying mechanism remains unclear. Using tubulin assembly-disassembly assay, in this work, we found that compound 1 obviously delayed more microtubule aggregation than PTX did. Under the catalysis of alkaline phosphatase, Fmoc-Phe-Phe-Lys(paclitaxel)-Tyr(H₂PO₃)-OH could self-assemble into nanofiber Fmoc-Phe-Phe-Lys(paclitaxel)-Tyr-OH with width comparable to the size of αβ-tubulin dimer. Therefore, we proposed in this work that nanofiber Fmoc-Phe-Phe-Lys(paclitaxel)-Tyr-OH not only inhibits the αβ-tubulin dimer binding to each other but also interferes with the plus end aggregation of microtubule. This work provides a new mechanism of the inhibition of microtubule formation by a PTX-derivative hydrogelator.     

Growth and Characterization of CIS Thin Films Prepared by Ion Beam Sputtering Deposition

Copper indium diselenide （CuInSe2） thin films were prepared by ion beam sputtering Cu, In and Se targets continuously on BK7 glass substrates and the three-layer film was then annealed in the same vacuum chamber. X-ray diffraction shows that the CuInSe2 thin films have a single chalcopyrite structure with preferential （112） orientation. Scanning electron microscopy reveals that the CIS thin films consist of uniform and densely packed grain clusters. Energy dispersive x-ray spectroscopy demonstrates that the elemental composition of CIS films approaches the stochiometric composition ratios of 1：1：2. Raman measurement shows that the main peak is at about 174cm^-1 and this peak is identified as the A1 vibrational mode from chaicopyrite ordered CulnSe2. Optical transmission and absorption spectroscopy measurement reveal an energy band gap of about 1.05 eV and an absorption coefficient of 10^5 cm^-1. The film resistivity is about 0.01 Ωcm.     

Composition-Dependent Characterization of Sb2Te3 Thin Films Prepared by Ion Beam Sputtering Deposition

The optimization of ion beam sputtering deposition process for Sb2 Te3 thin films deposited on BK7 glass substrates is reported. The influence of composition ratio on the thermoelectric properties is investigated. X-ray diffraction shows that the major diffraction peaks of the films match with those of Sb2 Te3. Hall effect and Seebeck coefficient measurement reveal that all the samples are of p-type. The Sb2 Te3 thin films exhibit the Seebeck coefficient of 190μVk^-1 and the electrical conductivity of 1.1 × 10^3 Scm^-1 when the atomic ratio of Sb to Te is 0.65. Carrier concentration and motility of the films increase with the increasing atomic ratio of Sb to Te. The Sb2 Tea film with a maximum power factor of 2.26×10^-3 Win^-1K^-2 is achieved when annealed at 400℃. Raman measurement shows that the main peaks are at about 120 cm^-1, 252 cm^-1 and 450 cm^-1, in agreement with those of V-VI compound semiconductors.     

改进冷端换热器的大功率脉冲管制冷机

依据热力学非对称理论对脉冲管制冷机冷端的热力学过程进行分析 ,对脉冲管制冷机制冷功率的提高提出了改进方案 ,搭建了单级低频大功率脉冲管制冷机的实验台 ,在实验中首次采用新型的填料烧结型换热器作为脉冲管的冷头 ,对这种换热器的效率在不同实验条件下进行了计算 ,并通过实验验证了这种新型换热器在脉冲管制冷机中应用的可行性。实验表明 :改进冷端换热器是提高脉冲管制冷机制冷效率的关键问题。在使用烧结换热器的单级脉冲管制冷机实验台上 ,采用输出功率 3k W的压缩机在 80 K时得到了 35W的制冷量 ,在效率上属国内领先水平。