流动注射化学发光法灵敏检测牛血清白蛋白

基于牛血清白蛋白(BSA)在碱性介质中对luminol-H₂O₂体系化学发光的增敏作用,结合流动注射化学发光技术提出了一种快速、 灵敏检测BSA的新方法。在优化条件下,检测BSA的线性范围为2.5×10-9～1.0×10-6 mol·L-1,检出限为5.8×10-10 mol·L-1,样品检测速率达112个·h-1。对1.0×10-7 mol·L-1 BSA溶液重复测定11次,相对标准偏差RSD为0.8%。该方法已成功应用于实际样品牛血清中BSA含量的测定。结合化学发光光谱和紫外可见吸收光谱,对luminol-H₂O₂-BSA体系可能的反应机理进行了探讨。     

Controllable synthesis of high aspect ratio Mg_2B_2O_5 nanowires and their applications in reinforced polyhydroxyalkanoate composites

Highly pure magnesium borate （Mg2B2O5） nanowires with an average diameter of - 30 nm, an average length of 15 μm, and a high aspect ratio of - 500 have been synthesized on a large scale via a two-step method. MgBO2（OH） nanowires with high aspect ratios were first prepared via a PVP-assisted hydrothermal technique. Using these nanowires as precursors, single crystalline Mg2B205 nanowires were synthesized by post-annealing treatment at a relatively low temperature of 700 ℃. The important effect of the MgBO2（OH）-Mg2B2O5 conversion process on the morphology of the Mg2B2O5 nanowires was investigated and it was indicated that the recrystallization process plays an important role in the protection of the one-dimensional （1D） nanostructure. Moreover, the rigidity and the toughness of the Mg2B2O5 nanowire- reinforced PHA composites were tremendously improved compared to those of the pure PHA. Our results demonstrate the effectiveness of Mg2B2O5 nanowires for reinforcement applications in polymer composites.     

Effects of interface roughness on photoluminescence full width at half maximum in GaN/AlGaN quantum wells

Low temperature photoluminescence(PL) measurements have been performed for a set of GaN/AlxGa1-xN quantum wells(QWs). The experimental results show that the optical full width at half maximum(FWHM) increases relatively rapidly with increasing Al composition in the AlxGa1-xN barrier, and increases only slightly with increasing GaN well width. A model considering the interface roughness is used to interpret the experimental results. In the model, the FWHM’s broadening caused by the interface roughness is calculated based on the triangle potential well approximation. We find that the calculated results accord with the experimental results well.     

Realization of an All-Fibre Self-Organization Intra-Cavity Coherent Erbium-Doped Fibre Laser

An intra-cavity coherent coupling Michelson Er-doped fibre （EDF） laser （MCEDFL） is proposed and demonstrated. Characteristics of the MCEDFL are investigated. It is found that the MCEDFL with a polarizer can be coherent combined effectively. By the experiment based on fibre Bragg gratings （FBGs） with different reflectivity, we find that the reflectivity of the FBG play a vital role in improving the performance of the MCEDFL. This outcome adequately shows many favourable features, such as high efficiency, easy operation, and simple all-fibre configuration.     

Analysis of Three Coupled Defects in One-Dimensional Photonic Bandgap Structure

The mutual interaction of three different defects in photonic crystals is studied theoretically. A theoretical model based on the classical wave analogue of the tight-binding （TB） picture is applied to the structure. We obtain analytic expressions for the eigenfrequencies and eigenmodes, from which the transmissions at resonance are derived. Based on this, a new type of the photonic quantum-well structure is investigated and its possible application is discussed. The TB predictions are compared with the transfer matrix method simulation results.     

利用手征SU(3)夸克模型研究轻双Λ超核^6_ΛΛHe,^5_ΛΛHe,^5_ΛΛH,^4_ΛΛHe,和^4_ΛΛH的结合能

在手征SU(3)夸克集团模型下, 通过共振群方法(RGM)计算了双Λ超核^6_ΛΛHe,^5_ΛΛHe,^5_ΛΛH,^4_ΛΛHe,和^4_ΛΛH的结合能. 结果表明, 假定双Λ超核具有双Λ集团和壳心核集团构成的两集团结构, 得到的^6_ΛΛHe超核的结合能与实验值基本吻合, 表明手征SU(3)夸克集团模型不仅能较好地描述重子谱、N-N和Y-N相互作用及轻Λ超核的结合能, 也能较好地描述Y-Y相互作用及双Λ超核^6_ΛΛHe,^5_ΛΛHe,^5_ΛΛH,^4_ΛΛHe,和^4_ΛΛH的结合能, 指出了它们存在的可能性.     

缺陷态透射率可调的三缺陷层的一维光子晶体

利用传输矩阵方法,从理论上研究了三缺陷层一维光子晶体的光学性质.在缺陷层间距足够大以致于出现缺陷态简并的情况下,调节第一或第三个缺陷层的光学厚度,光子晶体缺陷态的透射率会发生最大程度的变化.这种结构可同时具有窄带滤波器和光开关的功能,据此提出了一种低阈值光开关的设计.把折射率可调的向列型液晶作为晶体的第三个缺陷层,并用4×4传输矩阵方法计算了其缺陷态透射率与电场电压的关系.     

实时离子探测器——塑料闪烁体性能的实验研究

利用静电离子加速器对实时离子探测器——塑料闪烁体的特性 (包括灵敏度、动态范围、能量响应, 及空间分辨等)进行了实验研究,并对闪烁体探测器与其他传统的离子探测器的特性进行了比较. 对闪烁体在激光等离子体实验的离子束诊断中的可能应用进行了探讨.塑料闪烁体的应用可满足高重复频率激光等离子体离子加速实验高效率运行的要求,为实验研究提供强有力的支持.     

氮气在100 eV以下的绝对振子强度密度

在入射电子能量为2500 eV、能量分辨为100 meV的条件下，得到了氮气在100 eV以下的绝对光学振子强度密度和广义振子强度密度；得到了23 eV和31.4 eV两个超激发态的绝对广义振子强度、并讨论了它们的动量转移依赖特性。     

高温超导薄膜在微波双工器上的应用

本文采用全波电磁仿真方法设计、制作并测试了一种工作于C波段的星载高温超导微波双工器,采用的材料是在厚度为0.5mm介电常数为23.5的LaAlO3衬底上用磁控溅射法制备而成的双面氧化物高温超导薄膜YBCO.利用在微波范围内,高温超导薄膜的Q值比常规导体高1～3个数量级的特点,实现了器件的小型化和低插损.