241Am-Be中子参考辐射的蒙特卡罗模拟研究

研究用于校准场所中子剂量监测仪表的241Am-Be中子参考辐射场计量特性。采用蒙特卡罗方法模拟了空气自由中子参考辐射(FRNR),GB/T 14055规定的最小尺寸中子参考辐射(SRNR)和实际中子参考辐射(ARNR)中不同检验点处中子周围剂量当量率、散射中子占比和能谱分布特征。研究结果表明,空气对FRNR中的剂量率和能谱分布影响小,近似为理想中子参考辐射;采用5%含硼聚乙烯作屏蔽的最小尺寸SRNR可减少热中子,降低散射中子占比,影锥法不适用于小尺寸中子参考辐射中对散射中子的修正;ARNR中的散射中子更少、占比更低,影锥法所得散射中子占比与理论值基本一致。     

Overview of finite elements simulation of temperature profile to estimate properties of materials 3D-printed by laser powder-bed fusion

Laser powder bed fusion(LPBF),like many other additive manufacturing techniques,offers flexibility in design expected to become a disruption to the manufacturing industry.The current cost of LPBF process does not favor a try-anderror way of research,which makes modelling and simulation a field of superior importance in that area of engineering.In this work,various methods used to overcome challenges in modeling at different levels of approximation of LPBF process are reviewed.Recent efforts made towards a reliable and computationally effective model to simulate LPBF process using finite element(FE)codes are presented.A combination of ray-tracing technique,the solution of the radiation transfer equation and absorption measurements has been used to establish an analytical equation,which gives a more accurate approximation of laser energy deposition in powder-substrate configuration.When this new analytical energy deposition model is used in in FE simulation,with other physics carefully set,it enables us to get reliable cooling curves and melt track morphology that agree well with experimental observations.The use of more computationally effective approximation,without explicit topological changes,allows to simulate wider geometries and longer scanning time leading to many applications in real engineering world.Different applications are herein presented including:prediction of printing quality through the simulated overlapping of consecutive melt tracks,simulation of LPBF of a mixture of materials and estimation of martensite inclusion in printed steel.     

微形大孔径鱼眼车载镜头光学设计

将典型反远摄镜头设计方法与PWC法相结合,从理论模型出发搭建初始结构,借助光学设计软件ZEMAX辅助设计。得到一款工作波段436 nm、486 nm、546 nm、587 nm、656nm,F#1.5,全视场角160°,光学总长18.5 mm,可应用于车载后视系统的镜头,比市场上现有产品指标有明显提升,镜头高低温性能稳定、公差合理。结果表明将反远摄理想模型、PWC法及实际需求结合,设计效果好,镜头性价比高、性能优异,为相关领域的镜头设计提供有益借鉴。     

Enhanced Photoluminescence of InGaN/GaN Green Light-Emitting Diodes Grown on Patterned Sapphire Substrate

Green InGaN/GaN based light-emitting diodes （LEDs） are fabricated both on planar and wet-etched patterned sapphire substrates by metalorganic vapour phase epitaxy （MOVPE）. Their photoluminescence （PL） properties of the two samples are studied. The results indicate that the PL integral intensity of the green LED on the patterned substrate is nearly two times of that on the planar one within the whole measured temperature range. The enhanced PL intensity in the green LED on the patterned substrate is shown completely contributed from the extraction efficiency, but not from the internal quantum efficiency. The conclusion is supported by temperature-dependent PL analysis on the two samples, and the mechanisms axe discussed.     

离子束辅助沉积对类金刚石膜结构影响的计算机模拟

采用分子动力学(MD)模拟研究了离子束辅助沉积(1BAD)生长类金刚石(DLC)膜的物理过程.分 别选C₂分子和Ar离子作为沉积源和辅助沉积粒子.改变Ar的入射能量和到达比(A r／C)，研 究了它对DLC膜结构的影响.重点讨论了Ar辅助沉积引起表面原子的瞬间活性变化对薄膜结构 产生的影响.分析表明，由于Ar离子的轰击引起的能量和动量的传递，大大地增强了C原子在 表面的反冲动能及迁移概率，增加了合成薄膜的SP³键含量.研究结果和实验 观察一致，并从合成机理上给出了一些定量解释. 关键词： 类金刚石膜 离子束辅助沉积 分子动力学模拟     

直流高压加速管轴向绝缘的优化设计

 为了降低500 mA直流高压加速管高梯度区的电位梯度，对加速管轴向绝缘结构进行优化设计。首先分析了沿面闪络的机理和该加速管轴向绝缘体结构。根据SEEA理论并通过数值模拟，发现阴极、真空和绝缘体三结合点处电场畸变是产生高场强的原因，并分别对4种绝缘体结构进行模拟分析，最终确定出比较理想的结构：绝缘体沿面与阴极电极夹角为+45°，绝缘体两端开槽并均匀嵌入金属电极环，绝缘体均匀嵌入阳极电极片内。     

激光雷达中层大气遥感技术

介绍了中科院武汉物理与数学研究所瑞利激光雷达的技术特点，并从其对武汉地区中层大气密度和温度廓线探测的典型结果，给出了该激光雷达对中层大气主要参数的探测能力。     

Temperature-dependent specific heat of suspended platinum nanofilms at 80-380 K

Metallic nanofilms are important components of nanoscale electronic circuits and nanoscale sensors. The accurate characterization of the thermophysical properties of nanofilms is very important for nanoscience and nanotechnology. Currently, there is very little specific heat data for metallic nanofilms, and the existing measurements indicate distinct differences according to the nanofilm size. The present work reports the specific heats of 40-nm-thick suspended platinum nanofilms at 80-380 K and ~5×10^-4 Pa using the 3ω method. Over 80-380 K, the specific heats of the Pt nanofilms range from 166-304 J/(kg·K), which are 1.65-2.60 times the bulk values, indicating significant size effects. These results are useful for both scientific research in nanoscale thermophysics and evaluating the transient thermal response of nanoscale devices.     

YLiF4: Er3+, Tm3+, Yb3+中Tm3+浓度对上转换发光的影响

利用水热法合成了YLiF4: Er3 , Tm3 , Yb3 , 其中Er3 和Yb3 的浓度保持固定不变, 分别为1 mol%和1.5 mol%, Tm3 浓度变化范围是2 mol%～8 mol%. 在这种共掺杂体系中, 同时观察到了Er3 , Tm3 和Yb3 的吸收, 且Tm3 的吸收随着其浓度的增强而增强. 在980 nm光的激发下, 当Tm3 浓度很小时, 这种材料的上转换发光为白光. 其中蓝光主要来源于Tm3 的激发态1G4到基态3H6的跃迁, 绿光来源于Er3 的4S3/2和2H11/2到基态4I15/2的跃迁, 红光既来源于Tm3 的1G4→3F4的跃迁, 也来源于Er3 的4F9/2→4I15/2的跃迁. 并且这种上转换发光强度随着Tm3 浓度的增强而降低, 但对应不同能级跃迁的发光强度降低的幅度不同, 这是因为Er3 和Tm3 之间的相互作用.