基于柠檬酸的石墨烯量子点的制备及其应用

石墨烯量子点（GQDs）是一种新型碳基准零维材料,不但具有石墨烯的独特平面结构,同时具备碳点的量子限制效应和边界效应。GQDs具有独特的光学性质、低毒性、高荧光稳定性和高生物相容性,被广泛应用于检测、传感、催化、细胞成像、药物递送和污染治理等领域。GQDs的合成分为自上而下法和自下而上法,前者将大尺寸的石墨烯、石墨、碳材料切割成纳米级的量子点,后者使用不同的前驱体,通过水热法、热裂解法等方法合成石墨烯量子点。柠檬酸（CA）是一种重要的有机酸,室温下是白色结晶状粉末,是自下而上法合成GQDs的一种常用前驱体,近年来有许多关于以CA为前驱体合成不同GQDs的研究,以CA为前驱体合成的GQDs（CA-GQDs）在生物医药、荧光检测、成像等领域均有应用,具有较好的应用前景。对近年来基于CA的合成方法和具体应用进行了总结和回顾,旨在将现有CA-GQDs的相关成果尽可能汇总和展现,以对相关领域研究工作者提供一定参考,并对未来CA-GQDs较有前景的研究方向进行了展望。     

红宝石脉冲激光动态光力学方法研究与进展

本文提出了瞬态图像采集技术和电磁脉冲加载装置。应用红宝石脉冲激光光源,介绍了动态全息光弹性、动态散斑干涉、动态云纹干涉、水下爆炸全息干涉、动态电子散斑干涉和动态数字散斑相关等多种方法的测试原理和测试技术。为动态位移场、应变场和应力场的定量分析提供了广泛的应用前景。     

河南麦区收割对大气颗粒物及其组分特征排放的影响

农业收割期间排放的颗粒物是农忙期影响大气气溶胶组成的主要来源,因此明确农业收割期间排放的大气颗粒物排放特征具有重要意义。本实验立足河南省新乡市集约化农田实验基地,开展冬小麦区农业收割期间的大气颗粒物及其组分排放特征实验。结果表明收割期间的PMcoarse比其它时期高8.20%,农业站点收割时期的PMcoarse比其它时期高了72.22%,明确了其颗粒物污染特征为仅PM₁₀升高,而非PM₁₀和PM_2.5同时升高,同时PM₁₀的升高非PM_2.5升高引起的;含量最高的前5种元素是Al、Ca、Fe、K、Mg;收割期间,Fe的特征比值最高为0.79;Ca₂₊^和K₊^{离子百分含量在}PMcoarse中占比最高;特征值为0.81和0.78。综合水溶性离子和元素结果,Ca₂₊^、K₊^、Fe浓度协同变化可作为小麦收割过程颗粒物对大气污染影响的指纹识别,以区别于其他污染类型;便于大气污染防治行政主管部门有针对性的查污、防污、治污,提高人民群众生活环境的空气质量。     

Observation of Diffusion Process of a Water Droplet Immersed in Protein Solution in Microgravity

Pure liquid-liquid diffusion driven by concentration gradients is hard to study in a normal gravity environment since convection and sedimentation also contribute to the mass transfer process. We employ a Math Zehnder interferometer to monitor the mass transfer process of a water droplet in EAFP protein solution under micro- gravity condition provided by the Satellite Shi Jian No 8, A series of the evolution charts of mass distribution during the diffusion process of the liquid droplet are presented and the relevant diffusion coefficient is determined.     

Orthogonally Linearly Polarized Dual Frequency Nd：YAG Lasers with Tunable Frequency Difference and Its Application in Precision Angle Measurement

The orthogonally linearly polarized dual frequency Nd： YA G lasers with two quarter wave plates in laser resonator are proposed. The intra-cavity variable birefringence, which is caused by relative rotation of these two wave plates in laser inner cavity, results in the frequency difference of the dual frequency laser also changeable. The theory model based on the Jones matrix is presented, as well as experimental results. The potential application of this phenomenon in precision roll-angle measurement is also discussed.     

Pd/CZ三效催化剂中钯的团聚现象研究

通过浸渍法制备了一系列负载0.5%（重量百分比）Pd的氧化铈-氧化锆（NDK-84,由日本新日本电工株式会社提供）催化剂材料,并通过全面的表征手段,包括扫描电子显微镜（SEM）、透射电子显微镜（TEM）、高分辨透射电子显微镜（HR-TEM）、元素分布、X-射线衍射（XRD）,氮气吸脱附测试与比表面积和孔径分布分析（BET）、X射线光电子能谱（XPS）等,研究了不同Pd前驱体和不同热老化处理条件、H₂还原条件对Pd在铈锆固溶体上的分散、生长与烧结行为的影响,并评估了它们的三效催化活性.结果表明,热老化处理过程与还原过程显著影响了Pd在氧化物载体表面上的分散,因此导致不同的催化活性.     

Non-contact angle measurement based on parallel multiplex laser feedback interferometry

We present a novel precise angle measurement scheme based on parallel multiplex laser feedback interferometry （PLFI）, which outputs two parallel laser beams and thus their displacement difference reflects the angle variation of the target. Due to its ultrahigh sensitivity to the feedback light, PLFI realizes the direct non-contact measurement of non- cooperative targets. Experimental results show that PLFI has an accuracy of 8＂ within a range of 1400＂. The yaw of a guide is also measured and the experimental results agree with those of the dual-frequency laser interferometer Agilent 5529A.     

Generation and Modulation of Phase Difference of Output Intensities in a Feedback Nd:YAG Laser with an Extracavity Waveplate Rotated

External anisotropic feedback effects on the phase difference behaviour of output intensities in a microchip Nd：YAG laser are presented. By rotating a quarter wave plate placed in the external cavity, the angle between laser initial polarization direction and o-axis of the wave plate is tuned from -45°to 45°, which results in variable extra-cavity birefringence along two orthogonal detection directions. With only one optical path and one wave plate, laser intensities of the two orthogonal directions, both modulated by the external cavity length, are output with a tunable phase difference, which can be continuously changed from zero to twice as large as that of the waveplate. Experimental results as well as a theoretical analysis based on Fabry-Perot cavity equivalent model and the refractive index ellipsoid, are presented. The potential applications of this phenomenon are also discussed.