钩刺山羊草Aegilops triuncialis籽粒硬度主效基因的克隆与表达

根据小皮Pin a，Pin b，GSP基㈥的保守序列，设计合成了3对特异性引物，对四倍体钩刺山羊草Aegilopstriumialis的基因组DNA和胚乳RNA进行Pin a，Pin b，CSP基因扩增、克降、序列测定和表达分析，发现了两个新型Pin a等位堆因、一个新刑Pin b等化基因和一个新型GSP等位基因，基因序列均与六倍体小麦的同源基因存在较大的差异，Southern Blot分析结果表明，该材料巾含有2个拷贝Pin a。基因，5个拷贝Pin b基因，2个拷贝GSP基因．RT-PCR和Western Blot都证实了Pin a，Pin b，GSP基因在籽粒胚乳中的表达．研究结果显示由羊草可以为小麦分子育种提供有用的遗传资源。     

一维云粒子激光探测仪研制及探测数据分析

阐述基于Mie散射理论和激光技术而研制的云粒子探测仪的相关问题。利用m量级的小孔光阑模拟感应区域的散射光,并对系统的探测敏感区域面积进行测定;通过使用不同直径的标准粒子对系统进行标定,得到可靠的响应曲线,用于定量测量云粒子尺度谱及粒子数密度。在进行了一系列实验室内的实验之后,将仪器装载在飞机上进行穿云飞行测量实验,表明了该仪器在飞行过程中工作正常、稳定,并且能够即时地显示采样区内云粒子尺度谱分布和数浓度;通过分析探测得到的数据,并与云粒子谱分布进行比较,确认了探测数据有效可靠,反映了该仪器具有良好的测云能力。     

不同周期数的GaInAs/GaAsP多量子阱太阳能电池

为了研究不同量子阱周期数下GaInAs/GaAsP多量子阱太阳能电池性能的变化规律,利用金属有机化学气相沉积技术(MOCVD)制备了不同周期数的双结多量子阱太阳能电池样品以及无量子阱双结结构的参考样品,利用高分辨率X射线衍射仪(HXRD)和高分辨率透射电镜(TEM)测试了样品的晶体质量,同时在AM0(1×)光谱条件下测试了样品的I-V特性曲线和相应子电池的外量子效率。最终得到了高晶体质量、吸收截止波长在954 nm的Ga_(0.89)In_(0.11)As/GaAs_(0.92)P_(0.08)多量子阱结构,扩展波段的外量子效率最高达到75.18%,电池光电转换效率相对于无量子阱结构提升2.77%。通过对比测试结果发现,随着量子阱结构周期数的增加,太阳能电池在扩展波段(890~954 nm)的外量子效率不断提高,常规波段的短波响应(300~700 nm)会出现下降,长波响应(700~890 nm)会出现上升,短路电流和转换效率相应提升并趋于饱和。     

杜仲茎部剥皮后塑料薄膜包裹的效应

本文观察并比较了杜仲茎部剥皮后,完全暴露的与立即包以透明和黑色塑料薄膜的,再生树皮的组织分化过程。结果在暴露的和包以透明塑料薄膜的树干上,新的维管形成层都在较深层的未成熟木质部中发生,而包黑塑料薄膜的,则在愈伤组织与木质部交界处的未成熟木质部或愈伤组织中发生。这种新形成层的早期分化很象原形成层,向内分化出螺纹管胞和导管,向外形成筛胞状分子。     

谈微积分基本定理

凡是学过微积分的人,大概都不会忘记一个公式(或者说是一个定理):     

高频地波雷达频谱监测系统的前端电路设计

利用超外差式接收和直接数字合成(DDS)技术设计了高频地波雷达频谱监测系统的前端电路．该电路能够根据雷达探测距离的远近选择相对应的噪声信号接收频段,为后续的数据采集与处理提供噪声电平数据．实验证明：本系统的跳频本振信号信噪比(SNR)优于60dB;对输入信号具有60dB左右的增益和1μV的灵敏度,满足了武汉大学研制的下一代高频地波海态监测雷达对频谱监测的需要．     

High power pulse amplification of ytterbium-doped double-clad fiber amplifier

By solving a set of time-dependent equations,the characteristics of the ytterbium-doped double-clad fiber amplifier are presented.Besides the steady state in the fiber of the upper-state population,pump power and amplified spontaneous emission without the input signal,the dynamic characteristics of the high power Gaussian pulse amplification like the evolution of pulse waveform distortion,upper-state population distribution and stored energy and pulse energy of the amplifier under the forward and backward pump, are simulated.The relations between the output pulse energy of the amplifier and the different input pulse peak power or pump power are also discussed.The models and results can provide important guide for the design and optimization of the high power pulse amplification.     

New Power Lateral Double Diffused Metal-Oxide-Semiconductor Transistor with a Folded Accumulation Layer

A new lateral double diffused metal oxide semiconductor field effect transistor with a double-charge accumulation layer using a folded silicon substrate is proposed to improve the performance of the breakdown voltage and specific on-resistance. Three kinds of technologies, which are the additional electric field modulation effect, majority carrier accumulation and increasing the effective conduction area, are applied simultaneously by a semi- insulating polycrystalline silicon layer deposited over the top of thin oxide covering the drift region. It is indicated that by the simulator, the ideal silicon limits of the breakdown voltage and specific on-resistance have been broken due to the complete three-dimensional reduced surface field effect and the doubled majority carrier accumulation layer.     

Single Mode Er-Doped π-Phase-Shifted Distributed Feedback Fibre Grating Laser

A novel method incorporating the shielded method and the post-processing method has been proposed to fabricate the π-phase-shifted fibre grating. Then an Er-doped π-phase-shifted distributed feedback fibre grating laser has been fabricated using the grating. The laser threshold is 20mW. When pumped with 90mW light at 980nm, the laser gives an output of 1.1mW. Its signal-to-noise ratio is better than 60dB. It is demonstrated that the laser is single mode operation by means of a Fabry--Perot scanning interferometer.     

HL—1装置等离子体辐照Tic涂层实验分析

一、引言在聚变等离子体中控制杂质的污染被认为是获得高温等离子体的重要问题之一。因此对材料要进行优化选择,例如石墨和碳就是目前有利的孔栏材料和结构材料。但是由于碳的自溅射作用和化学活性,在高温溅射时可形成易挥发的碳化物,如甲烷等从而增加了化学腐蚀。某些含碳的化合物如TiC,SiC和BC以及氮化物如TiN和Si_3N_4等是目前研究的一些有用途的材料。实际上TiC或TiN已经用于孔栏,壁内衬涂层或高频加热天线。