Simultaneous estimation of copper, zinc, cadmium and mercury in biological material by neutron activation analysis

Simultaneous determination of copper, zinc, cadmium and mercury with high sensitivity is possible by neutron activation analysis. After irradiation, the samples are digested and an initial separation of the four elements made by means of an ion-exchange resin. The elements in the separated fractions are then treated to give radio-chemical purity, precipitated, and their activities measured. A purely instrumental technique for the analysis of zinc in samples of biological material is also described. The samples are irradiated for a week and after the activity has decayed for about three months it is measured on a gamma-spectrometer.     

Controlled vesicle self-assembly in microfluidic channels with hydrodynamic focusing

Traditional liposome preparation methods are based on mixing of bulk phases, leading to inhomogeneous chemical and/or mechanical conditions during formation; hence liposomes are often polydisperse in size and lamellarity. Here we show the formation of liposomes that encapsulate reagents in a continuous two-phase flow microfluidic network with precision control of size from 100 to 300 nm by manipulation of liquid flow rates. We demonstrate that by creating a solvent-aqueous interfacial region in a microfluidic format that is homogeneous and controllable on the length scale of a liposome, we can facilitate the fine control of liposome size and polydispersity.     

A simple and general method for the synthesis of multicomponent Na2V6O16.3H2O single-crystal nanobelts

Multicomponent Na2V6O16.3H2O (barnesite) single-crystalline nanobelts were synthesized by a direct reaction-crystallization growth of bulk V2O5 and NaF powders under hydrothermal treatment without using any templates or catalysts. This new strategy could be extended to prepare other one-dimensional multicomponent nanomaterials including ammonium, alkali-metal or alkali-earth metal vanadium oxide bronzes and other transition metal oxyfluorides. This is an efficient and mild solution method with clear advantages over the traditional high-temperature approach for the large-scale production of 1D multicomponent nanomaterials. The applicability of this approach toward the preparation of other inorganic systems, such as tungstates and molybdates, will be explored.     

Validation of the thermodynamic model of inorganic arsenic in non polluted river waters of the Basque country (Spain)

The thermodynamic model of inorganic arsenic was validated by comparing the predicted As(III) concentration with the experimentally determined one in several river waters samples of the Basque Country (Spain) collected in two sampling campaigns: spring and autumn 2000. This model takes into account the acid-base equilibria of As(III) and As(V) together with the redox equilibria between the H₃AsO₃ and H₃AsO₄ species. A correct prediction of As(III) concentration requires the knowledge of the total concentration of arsenic, pH, redox potential (referred to hydrogen electrode), and ionic strength values of the solution. The estimation of the activity coefficients of the arsenic species was performed by means of the Modified Bromley’s Methodology (MBM).In order to perform the experimental As(III) determination, an analytical method was implemented by using an ion exchange separation of As(III)/As(V) on a continuous FIA-IE-HG-AAS system. The total arsenic concentration was determined together with total concentration of the main alkaline or alkaline-earth metals and anions in the natural waters. Temperature compensated measurements of the pH and redox potentials were made in-situ at the sampling sites.For both seasonal campaigns, the agreement between predicted and experimental As(III) is really high for those samples belonging to non polluted river waters.     

Shape recognition of alkylammonium ions by 1,3-bridged calix[5]arene crown-6 ethers: endo- vs exo-cavity complexation

A series of tri-O-substituted 1,3-bridged calix[5]arene crown-6 ethers bearing alkyl, arylalkyl, alkoxyalkyl, and alkoxycarbonylmethyl residues at the lower rim and either (t)()Bu or H substituents at the upper rim have been synthesized. (1)H NMR studies have shown that p-tert-butylcalix[5]crowns, irrespective of the size and nature of their lower rim pendant groups, adopt preorganized conelike conformations, whereas p-H-calix[5]crowns with bulky substituents preferentially exist in solution as partial cone conformers (C(1) symmetry). Calix[5]crown derivatives behave as mono- or ditopic receptors for isomeric butylammonium ions, forming endo-cavity (inside the calixarene cup) and/or exo-cavity (at the crown ether moiety) 1:1 complexes according to the shape of the guest. These two binding modes can be clearly distinguished and monitored by (1)H NMR titration experiments.     

Mild electrophilic trifluoromethylation of beta-ketoesters and silyl enol ethers with 5-trifluoro methyldibenzothiophenium tetrafluoroborate

Cyclic and acyclic beta-ketoesters were efficiently trifluoromethylated with 5-trifluoromethyldibenzothiophenium tetrafluoroborate in the presence of a phase-transfer catalyst to afford the corresponding alpha-substituted alpha-trifluoromethyl beta-ketoesters in good to excellent yields. In a second approach, 5-trifluoromethyldibenzothiophenium tetrafluoroborate and tetrabutylammonium difluorotriphenylstannate were used for efficient electrophilic trifluoromethylation of various silyl enol ethers leading to the corresponding alpha-trifluoromethyl ketones in good to high yields.     

The search for a new model structure of β-Factor XIIa

We present the search for a new model of -factor XIIa, a blood coagulation enzyme, with an unknown experimental 3D-structure. We decided to build not one but three different models using different homologous proteins as well as different techniques and different modellers. Additional studies, including extensive molecular dynamics simulations on the solvated state, allowed us to draw several conclusions concerning homology modelling, in general, and -factor XIIa, in particular.     

Simultaneous determination of Cd(II), Cu(II) and Pb(II) in surface waters by solid phase extraction and flow injection analysis with spectrophotometric detection

A method for heavy metal monitoring using spectrophotometric detection is presented. Traces of Cu(II), Pb(II) and Cd(II) at the low microg l(-1) level can be determined simultaneously after both selective removal of metal interferences and preconcentration using 'extraction chromatographic resins'. Lewatit TP807'84, which contains di(2,4,4-trimethylpentyl)phosphinic acid as active component, was used as solid adsorbent. Two minicolumns containing this resin were used: one at pH 3.2 for the removal of interferences, such as Zn(II) and Fe(III), and the other at pH 5.5 for the selective preconcentration of the target analytes. Spectrophotometric determination used FIA methodology with sulfarsazene as chromogenic reagent and partial least-squares multivariate calibration. The method was successfully applied to the analysis of surface waters from the Llobregat river and ground water samples from wells in the Guadiamar basin. Accuracy, expressed in terms of recoveries, was in the range 80-120% and relative standard deviations were below 10%.     

Aerosol formation and reaction pathways of atmospheric oxidation of dimethylsulfide

This paper concerns with three series of experiments about dimethylsulfide gas phase oxidation, carried out at increasing NOx level (< 20 ppb, 1 ppm, 10 ppm) to show the relation between the amounts of nitrogen oxides and the molar yields of sulfur containing products. DMSO, DMSO2, HCHO, HCOOH and SO2 were found as main reaction products. From these experiments and from preceding studies, a sensitive decrease in the quantity of total sulfur products in aerosol phase is underlined. This result derives from the reaction of NOx with CH3S(O)O2 and CH3S(O)OO radicals, which leads to stable intermediates as methylsulphonylperoxynitrate, MSPN, with a characteristic PAN-like structure.