铜铟镓硒太阳能电池多层膜的结构分析

对于溅射后硒化和共蒸发等方法制备的铜铟镓硒（CIGS）太阳能电池薄膜,利用多种分析方法研究了CIGS多层膜的复杂结构等．研究表明：卢瑟福背散射（RBS）在分析CIGS多层膜方面具有其独特优势和可靠的结果;溅射后硒化方法制备的CIGS薄膜中,Ga和In在CIGS薄膜中呈梯度分布,这种Ga表层少而内层多的不均匀分布与Mo层没有必然关系;RBS和俄歇电子能谱分析（AES）均显示CIGS太阳能电池器件多层膜界面处存在扩散,尤其是CdS与CIGS,Mo与CIGS的界面处;X射线荧光（XRF）结果表明,电池效率最高的CIGS层中In,Ga比例为In：Ga=0．7：0.3;X射线衍射（XRD）结果显示：退火后的CIGS／Mo薄膜结晶品质得到了优化．     

Study of depth-dependent tetragonal distortion of quaternary AIInGaN epilayer by Rutherford backscattering/channeling

<正>A 240-nm thick Al_0.4In_0.02Ga_0.58N layer is grown by metal organic chemical vapour deposition,with an over 1-μm thick GaN layer used as a buffer layer on a substrate of sapphire（0001）.Rutherford backscattering and channeling are used to characterize the microstructure of AlInGaN.The results show a good crystalline quality of AlInGaN(x_min= 1.5%) with GaN buffer layer.The channeling angular scan around an off-normal（1213） axis in the {1010} plane of the AlInGaN layer is used to determine tetragonal distortion e_T,which is caused by the elastic strain in the AlInGaN.The resulting AlInGaN is subjected to an elastic strain at interfacial layer,and the strain decreases gradually towards the near-surface layer.It is expected that an epitaxial AlInGaN thin film with a thickness of 850 nm will be fully relaxed （e_T=0）.     

无衍射特殊光束的产生与三维表征

无衍射光束(如贝塞尔光束、艾里光束)因具有无衍射、自愈合的特性, 在很多领域都有广泛的应用. 本文提出使用纯相位型空间光调制器对光场的复振幅进行调控, 从而可以产生多种复杂模式的无衍射光束, 如强度可独立调控的多个零阶贝塞尔光束, 两个高阶贝塞尔光束干涉生成的花瓣状无衍射光束, 具有多个主瓣的加速光束等特殊的无衍射光束. 通过在待测焦场附近放置一个平面反射镜, 使其沿光轴快速扫描光场, 并由数字相机同步拍摄反射回来的一系列二维光场强度分布信息, 可实现对无衍射光束三维光场强度分布的快速测量和表征. 本实验方法和技术可以快速产生各种复杂的特殊光场并获得其精确的三维可视化重建效果, 在光学显微、光学俘获、光学微加工等领域有潜在的应用价值.     

Charge Transport and Magnetotransport Properties of Polyimide Irradiated by 80keV Co Ions

Charge transport properties of polyimide films implanted with 80 keV Co ions at two different fluences （series I： 1.25 × 10^17 ions/cm^2, series Ⅱ： 1.75 × 10^17 ions/cm^2） are studied in detail. For series I, the temperature dependence of surface resistivity fits Mott＇s equation very well. It is on the insulating side of the insulator-metal transition （IMT）. However, for series Ⅱ, the temperature dependence of surface resistivity is not in agreement with Mott＇s equation. It is on the metallic side of lMT. The magnetotransport properties of these two series are also studied. No significant magnetoresistive effect is observed for series I at both 5 K and 300 K. For series Ⅱ, an obvious magnetoresistive effect is observed at 5 K, while there is no magnetoresistive effect at 300 K. Rutherford backscattering spectrometry （RBS） is applied to confirm the actual fluence for these two series.     

氧气氛中p-GaN/Ni/Au电极在相同温度不同合金时间下的欧姆接触形成机制和扩散行为

用卢瑟福背散射/沟道技术研究了p-GaN上的Ni/Au电极在氧气氛下相同合金温度(500℃)不同合金时间后的微结构演化,以揭示欧姆接触的形成机制.利用背散射随机谱和RUMP模拟程序研究了电极金属之间的互扩散,用沟道谱探测了电极金属中的氧分布.结合不同合金时间下比接触电阻ρ_c的变化,发现随着合金时间的延长比接触电阻持续降低,在合金时间60 s后降低的速度减慢, Au扩散到GaN的表面,在p-GaN上形成外延结构,O向电极内部扩散反应生成NiO对降低ρ_{关键词： GaN 卢瑟福背散射/沟道 欧姆接触}     

Josephson结中激发孤子的电泳脉冲方法—原理与数值实验

根据反射射理论讨论了电泳脉冲法产生磁通孤子的阈值条件。对甚长结作的数值实验与理论符合很好。对有限结，考虑到边界效应，电流台阶范围等因素，对孤子激发条件有额外的要求。对圆对称环域结用脉冲法激发了孤子，并分析了其中回波效应、外磁场等对激发条件的影响。所有结果表明，电流脉冲法是在Ｊｏｓｅｐｈｓｏｎ结中激发孤子态的有效方法，理论阈值条件可以提供有益的参考作用。     

基于柴油机ω型燃烧室缸内激波的活塞破坏研究

以二维数值模拟为基础,研究柴油机ω型燃烧室内的冲击波发展震荡过程,得到作用于活塞不同位置处的超压分布.模拟结果表明:由于燃烧室结构的独特性,导致冲击波能在特定区域进行汇聚,致使该区域超压明显高于其他区域.将该模拟结果与实际破坏失效的活塞进行对比,发现冲击波汇聚区域往往就是活塞被破坏的地方.数值模拟结果和实际破坏结果得到了很好的吻合.这为揭示柴油机活塞因爆震出现而造成的破坏机理以及燃烧室抗爆震结构形状设计提供了理论基础.     

Room-Temperature Magnetism Realized by Doping Fe into Ferroelectric LiTaO3

We synthesize LiTal-x FexO3-σ （LTFO） remain single phase up to x = 0.09 ceramics by the conventional solid-state reaction method. The samples The magnetic measurements show that the doping of Fe successfully realizes ferromagnetism of LTFO at room temperature. The dielectric measurements indicate that LTFO is ferroelectric, similarly to LiTaO3 （LTO）, but its ferroelectric Curie temperature seems to decrease with the increasing Fe content. By means of doping Fe ions into LTO, the coexistence of spontaneous electric polarization and spontaneous magnetic moment is realized at room temperature.