强激光远场焦斑重构算法研究

 通过CCD图像采集单元结合传统的列阵相机测量高功率固体激光器的远场焦斑分布，采用图像处理技术的边缘算子提取焦斑的几何中心，提出通过几何中心对心的焦斑嵌套重构算法，解决了光斑饱和时的对心难题，实现了快捷准确测量激光焦斑，为激光器的实时控制提供参考数据。     

氩团簇高信噪比13—23nm软x射线辐射谱实验观察

用150fs的掺钛蓝宝石激光系统, 在功率密度约为5×10¹⁵ W/cm²时 激励氩(Ar)团簇，利用具有空间分辨能力的平场光栅谱仪观察到13—23nm波段Ar的软x射线谱，并观察到Ar的11阶离子谱线.在较宽的激光脉宽和较低的激光功率密度情况下，通过激励Ar团簇，获得 了Ar的高阶电离度的实验结果，且谱线的信噪比明显好于光场感应电离的情况，说明团簇的 形成大幅度地提高了激光能量的吸收效率. 关键词： Ar团簇 超短强激光 软x射线辐射     

Power distribution in Yb~(3+)-doped double-cladding fiber laser

The distribution of pump light and signal light in Yb3+-doped double-cladding fiber laser is analyzed based on a rate equation model. Numerical simulation results are obtained. The numerical solution of the rate equation is shown to be in excellent agreement with the experimental data.     

Φ520mmF/1.6椭球面反射镜加工

介绍了一块Φ520mm大相对孔径(F/1.6)轻量化椭球面反射镜的加工与检测方法。镜面的有效口径为Φ502mm,顶点曲率半径为1600mm,非球面系数k=-0.9663,面形精度要求优于0.025λ(RMS)。镜子背面有54个大小深浅不一的不通孔,用于减轻镜子的重量。采用WYKO干涉仪检测得到镜面面形误差达RMS0.02λ,λ=632.8nm。     

Study of the THGEM detector with a reflective CsI photocathode

The THGEM detector without and with a CsI has been tested successfully. The optimal parameters of THGEM have been determined from eight samples. The UV photoelectric effect of the CsI photocathode is observed. The changing tendency related to the extraction efficiency (ε_extr) versus the extraction electric field is measured, and several electric fields influencing the anode current are adjusted to adapt to the THGEM detector with a reflective CsI photocathode.     

Power distribution in Yb3+-doped double-cladding fiber laser

The distribution of pump light and signal light in Yb3+-doped double-cladding fiber laser is analyzed based on a rate equation model.Numerical simulation results are obtained.The numerical solution of the rate equation is shown to be in excellent agreement with the experimental data.     

Experimental Study on Electrostatic with Two Guiding of Supersonic D20 Molecular Beam Charged Wires

We demonstrate the guiding of a supersonic heavy-water （D2O） molecular beam using a hollow electrostatic field generated by the combination of two parallel charged-wires and two grounded metal-plates, and report some new and preliminary experimental results. In the experiment, we detect the guiding signals by using the method of time-of-flight mass spectrum and study the dependence of the relative transmission of the beam guide on the guiding voltage. Our study shows that the relative transmission of the beam guide is increased linearly with increasing guiding voltage Vguid, and the number of the guided D20 molecules is at least increased by 89.4% when the guiding voltage is ＋20.0k V. Finally, some potential applications of our guiding scheme in the molecule optics are briefly discussed.     

利用宇宙线对BESⅢ量能器CsⅠ（Tl）晶体探测器单元的测量

利用宇宙射线进行探测器模型的性能测试是高能物理普遍采用的方法，其中最重要的步骤之一就是确定宇宙线入射的准确位置和径迹．多数采用丝室探测器来进行宇宙线的精确定位，需要很高的造价和复杂的电子学系统．本文介绍一种简单的定位方法，采用塑料闪烁体条加波移剂光纤编码读出的方式，可以实现精度为1cm的定位．据此建立了一套实验装置，对BESⅢ电磁量能器CsⅠ（Tl）晶体探测器单元的光输出强度和不均匀性进行了测量．     

A Two-Photon Femtosecond Laser System for Three-Dimensional Microfabrication and Data Storage

Utilizing the well-focused femtosecond laser with extreme high pulse intensity, we built a two-photon micro-fabrication and data storage system, which was introduced through several functional parts. Based on this homemade system, several three-dimensional microstructures were fabricated by two-photon polymerization, and three-dimensional data storage of six-layers was achieved by two-photon excitation with a photochromic material.     

应力导致InAs/In0.15Ga0.85As量子点结构中 In0.15Ga0.85As阱层的合金分解效应研究

利用固源分子束外延技术,在In0.15Ga0.85As/GaAs量子阱生长了两个InAs/In0.15Ga0.85As量子点(DWELL)样品.通过改变其中一个InAs DWELL样品中的In0.15Ga0.85As阱层的厚度和生长温度,获得了量子点尺寸增大而且尺寸分布更均匀的结果.结合光致发光光谱(PL)和压电调制光谱(PzR)实验结果,发现该样品量子点的光学性质也同时得到了极大的优化.基于有效质量近似的数值计算结果表明:量子点后生长过程中应力导致In0.15Ga0.85As阱层合金分解机理是导致量子点尺寸和光学性质得到优化的主要原因.