光纤马赫-曾德尔干涉法测量极化聚合物的电光系数

报道了用光纤马赫曾德尔干涉法测量极化聚合物电光系数的方法和原理。该方法不仅可以测量聚合物薄膜的电光系数而且可以测量聚合物波导的电光系数,并且该方法可以同时测量聚合物的电光系数张量元r13和r33。该方法最突出的优点是不必在聚合物薄膜的表面制备第二个电极,因此尤其适合于在电光聚合物试制阶段测试聚合物的电光系数。干涉仪的输出被反馈到参考臂中控制相位偏置点的压电陶瓷,从而实现对干涉仪相位偏置点的闭环控制,因此降低了对环境稳定性的要求并且提高了测量精度。实际测试了极化聚合物薄膜PMMA-DR1的电光系数张量,其测量值r13=8.3 pm/V,r33=25.7 pm/V。     

Study of runaway electron behaviour during electron cyclotron resonance heating in the HL-2A Tokamak

During the current flat-top phase of electron cyclotron resonance heating discharges in the HL-2A Tokamak, the behaviour of runaway electrons has been studied by means of hard x-ray detectors and neutron diagnostics. During electron cyclotron resonance heating, it can be found that both hard x-ray radiation intensity and neutron emission flux fall rapidly to a very low level, which suggests that runaway electrons have been suppressed by electron cyclotron resonance heating. From the set of discharges studied in the present experiments, it has also been observed that the efficiency of runaway suppression by electron cyclotron resonance heating was apparently affected by two factors: electron cyclotron resonance heating power and duration. These results have been analysed by using a test particle model. The decrease of the toroidal electric field due to electron cyclotron resonance heating results in a rapid fall in the runaway electron energy that may lead to a suppression of runaway electrons. During electron cyclotron resonance heating with different powers and durations, the runaway electrons will experience different slowing down processes. These different decay processes are the major cause for influencing the efficiency of runaway suppression. This result is related to the safe operation of the Tokamak and may bring an effective control of runaway electrons.     

Observation of Fishbone-Like Instabilities Excited by Energetic Electrons on the HL-2A Tokamak

Strong burst of an internal kink mode is observed on the HL-2A tokamak. Features of the fishbone-like mode are presented. The fishbone-like instabihties can be driven during electron cyclotron resonance heating （ECRH） and can be excited on the high field side （HFS） by ECRH. It is found for the first time that the modes also present themselves on the low field side （LFS） during ECRH. Experiments show that the energetic electrons with energy of 35-70 keV play a dominant role in the excitation mechanism, and the experimental results are also consistent with our calculation ones.     

液压模块组合挂车装载问题研究

为了车辆设计和指导安全运输装载, 研究了任意轴线液压模块组合挂车装载问题, 分析了装载量与装载跨距之间的关系, 推导出任意轴线组合挂车装载计算公式. 利用推导的公式对典型车型进行装载计算并绘制出装载图.     

4, 6-二芳基-2-氨基嘧啶类衍生物的合成与生物活性

合成并表征了5种4,6-二芳基-2-氨基嘧啶类化合物。 测试了它们对大肠肝菌甲硫酰胺肽酶(EcMetAP)的抑制作用及对CXCR4受体的拮抗作用。 发现5种化合物均对EcMetAP酶活有抑制作用,除化合物2外均对CXCR4受体有拮抗作用。 利用FieldTemplater和FieldAlign软件对化合物1～5的上述活性构效关系进行了分析,初步认为化合物的嘧啶环3位N原子及4位取代苯环上若引入给电子基团,可增强这类化合物的EcMetAP酶抑制活性;在嘧啶环2位引入负电性较强的基团取代,改造2个苯环和嘧啶环的4、5、6位Ｃ原子的结构可增强其CXCR4受体拮抗活性。     

小远志多糖一级结构的初步研究

从药用植物小远志中提取、精制得多糖PP-1,PP-2,采用纸层析、薄层层析和气相色谱等方法确定了多糖中的单糖组成.通过高碘酸氧化、Smith降解和甲基化分析等方法确定了相邻单糖基连接方式,初步推测了两个小远志多糖可能的一级结构,为进一步合成和研究其生物活性提供了数据支持.     

HL-2Aװ��LHCD������3.7GHz 3dB���������

根据微波叠加原理、阻抗匹配和相位补偿理论计算出3dB功率分配器的理论数据,再利用高频电磁场仿真软件进行电磁仿真和参数优化。实物测量结果:输入端口的反射损耗RL--31.12dB;隔离度Iso--34.35dB;输出端口功分性能为-3.09dB,-3.07dB;相位差1.8°;输入驻波比VSWR=1.070,与理论数据基本符合。     

HL-2Aװ��3MW 68GHz ECRHϵͳ����������

HL-2A装置3MW ECRH系统采用双高压电源形式的电子回旋管,阴极高压电源为回旋管提供加速束电流,阳极高压电源对通过转换区后的束电流施加减速作用,利于回旋管收集极吸收。根据回旋管运行特点和各回旋管不同的工作特性,合理优化回旋管阴极、阳极高压电源工作电压和其他参数。通过远程监控系统,使同时工作的回旋管处于较好的工作状态,充分提高 HL-2A 装置 ECRH 系统多管运行的微波输出功率。实验中,6支回旋管同时运行时,微波最高输出功率2.5MW,达到设计额定值83%,使HL-2A装置中等离子体得到了有效的加热。     

射频等离子体技术制备合成低碳醇用铜钴基催化剂

采用射频等离子体技术制备了CO加氢合成低碳醇用新型CuCo/ZrO2催化剂, 研究了等离子体气氛氮气、氢气和先氮气后氢气处理对催化剂结构和性能的影响, 并应用BET、XRD、XPS、TG和TPR技术对催化剂进行了表征. 与常规焙烧制得的样品相比, 射频等离子体技术制备的催化剂可有效抑制烃类生成, 提高总醇选择性, 大幅提高反应活性和低碳醇的时空收率. 表征结果显示, 等离子体技术使催化剂前驱体在低温下分解形成活性相, 显著提高了催化剂比表面积, 促进催化剂活性组分晶粒细化并提高其分散度, 催化剂表面的铜含量增加.     

Surface plasmon wave propagation along single metal wire

Recently,the single metal wire(SW) has become attractive for its potential applications in the terahertz and higher frequency range.However,as the most simple and typical surface plasmon polariton(SPP) transmission line,its study seems far from enough.Many important transmission behaviours have not been explained satisfactorily from the viewpoint of physics.In this paper,making use of the modified Drude model(MDM) based on the Sommerfeld theory,the transmission behaviours of SPPs along SW are systemically investigated theoretically.Some important physical phenomena such as the mode transformation,the lifetime of the radiative mode and the resonance frequency are revealed,and their mechanisms are explored.The results obtained in the paper will facilitate a general understanding of the features and the physical essence of the SPP transmission,not only for SW itself but also for other SPP transmission lines.