High Efficiency Multi-kW Diode-Side-Pumped Nd：YAG Laser with Reduced Thermal Effect

We demonstrate a high efficiency multi-kW diode-side-pumped Nd：YAG laser. High cooling efficiency of the diode-side-pumped module in the laser is achieved. The middle portion of the Nd：YAG rod in the module is cooled by a coolant jet with screwed side surface, and the end-caps of the rod without screwed side surface are cooled by Au coated on the surface. The thermal effect of the laser rod is reduced, which leads to high output power with high optical-optical conversion efficiency. By using three identical Nd：YAG laser modules, an output power of 4.2 kW and beam quality of 58 mm＆#12539;mrad with an optical-optical efficiency of 35% at 1064 nm is obtained in a laser oscillator. By using four identical Nd：YAG laser modules, an output power of 3.1 kW and beam quality of 17 mm＆#12539;mrad with an optical-optical efficiency of 25.8% is demonstrated in a master oscillator power-amplifier system.     

Study on the pre-chopper in CSNS LEBT

Physical designing of the pre-chopper in CSNS LEBT is carried out, which includes the deflecting voltage, the length and the width of the deflecting plates, and the gap between the deflecting plates. The most outstanding feature of the design is that both the gap and the width vary with the beam envelope size. So both the requried deflecting voltage and the loaded capacitance are lowered. In order to avoid destruction of the space charge neutralization by the pre-chopper in the whole LEBT, an electron-trapping electrode is arranged to confine the electrostatic field of the pre-chopper to the local area. To examine the reliability of the pre-chopping design in CSNS LEBT, a similar pre-chopping design in ADS RFQ LEBT is set up and an experiment on the pre-chopper is prepared. 3-dimensional simulations are carried out to determine the loaded capacitance and the applied voltage of the electron-trapping electrode.     

高架污染绕建筑对流扩散风洞实验与数值仿真

采用激光衍射瞬时浓度场测量系统和图像处理系统,对不同高架与周围建筑高度比下污染点源绕建筑对流扩散进行了风洞实验.Fluent双相耦合模型与实验进行了相互校核,得到了建筑的各个高度层面污染分布、不同高度比下的污染扩散及污染分布随时间变化的规律.不同高度比对污染对流扩散具有明显的影响,建筑各高度层面污染浓度分布也存在明显差别.当高度比较小时,污染将堆积在建筑物底层.污染分布随时间变化有助于了解污染对流扩散的时间效应.结果可以为高架与周围建筑规划提供参考与依据.     

Convection-Dominated Accretion Flows with Radiative Cooling

By numerically solving the set of basic equations describing black hole accretion flows with low accretion rates, we show that although the dynamical structure of these flows is essentially unaffected by radiative processes in comparison with the case in which the radiation is not considered, the radiative cooling can be more important than the advective cooling in the flow＇s convection-dominated zone, and this result may have implications to distinguish observationally convection-dominated accretion flows from advection-dominated accretion flows.     

Smooth Transition from Shakura—Sunyaev Disc to Advection—Dominated Accretion Flow

We solve a set of basic equations describing black hole accretion flows using the standard Runge-kutta method and a bridging formula for the radiative cooling,and show that a smooth transition from a shakura-Sunyaev disc to an advection-dominated accretion flow is realizable for the high-viscosity case,without the need of involving any extra mechanism of energy transport.     

多传感器光电系统视轴一致性测试方法研究

本文详细介绍了宽光谱的多传感器光电瞄准跟踪系统的视轴一致性测试的三种方法：像纸法、CCD 法和靶标法,详细分析了各种测试方法的主要误差来源.通过搭建一定的试验环境,分别用像纸法、CCD 法和靶标法对同一多传感器光电系统的视轴一致性进行了测试和分析.研究结果表明,CCD 法测试视轴一致性能达到了较高的准确度.     

Radiatively Inefficient Accretion Flows with Outflow

We construct a family of self-similar solutions to describe radiatively inefficient accretion flows with outflow. We show that outflow has important effects on the dynamical structure of accretion flows. In particular, we prove that outflow can be an effective mechanism of removing the released gravitational energy of accreted gas.     

Thermal analysis of the CSNS H－ ion source

There are two cooling systems to maintain the thermal stability of the CSNS H^- ion source during its operation： Air-cooling in the source body of the discharging chamber and water-cooling in the flange on which the discharging chamber is installed. The optimal cooling parameters to ensure the operation of the H^- ion source are determined through a thermal analysis. In addition, a transient analysis is also performed to know exactly the transient temperature variation during the whole 40 ms period of the pulsed mode operation of the ion source.     

高功率准连续波腔内和频全固态黄光激光器

报道了高功率准连续波腔内和频全固态黄光激光器的研究结果.为获得高功率的黄光输出,首先,激光器采用准连续方式运转,在保持抽运水平的条件下降低热效应,从而提高光束质量和光光转换效率;第二,采用热近非稳腔腔型设计,双棒串接补偿热致双折射技术,获得大基模体积高光束质量的基频光;第三,通过优化腔型,采用L型共折叠臂平-凹对称腔,使两束基频光达到空间重合且满足功率配比.通过这些方法,得到了输出功率7.6W,重复频率1.1kHz的准连续波黄光输出.据我们所知,这是目前腔内和频方案所获得的最高功率全固态黄光输出. 关键词： 黄光激光 腔内和频 Nd：YAG激光 全固态激光器     

Introduction to the overall physics design of CSNS accelerators

The China Spallation Neutron Source (CSNS) is an accelerator-based facility. The