一种新的基于频域有限差分方法的小周期有机太阳能电池的光电特性

由MoO₃/Ag/MoO₃ （MAM）组成的多层膜结构非常有希望替代ITO作为有机太阳能电池中的透明阳极.然而,基于MAM结构的有机太阳能电池光吸收能力较弱.为此,引入了一种小周期短节距金属光栅,利用表面等离子激元增强活性层的光吸收.借助于频域有限差分方法求解麦克斯韦方程和半导体方程,探讨了有机太阳能电池结构的光学和电学性质.分析结果表明：与平面结构相比,活性层中的光吸收大大提高;同时,当凹槽宽度为4 nm,能量转换效率提高了49%.相关结果有助于更好地开发和利用无ITO层的有机太阳能电池.     

基于薄板样条插值法的MEMS陀螺仪温度补偿模型辨识

MEMS陀螺仪以其优异的性能及廉价的成本,被广泛地应用于水下航行器中;然而传感器的温度变化严重影响测量精度,因此,对其温度补偿模型准确辨识具有重要意义。本文利用基于可持续激励准则的快速标定算法获取标定参数,然后利用薄板样条插值方法建立MEMS陀螺仪温度补偿模型,并将该方法辨识结果与多项式拟合算法的辨识结果进行对比,实验验证,利用本文所提出算法辨识得到的传感器温度补偿模型,有效改善了MEMS陀螺仪测进精度。     

基于激光拉曼光谱的水面油膜厚度测量方法研究

为了实现水体表面油膜厚度的快速非接触检测,基于激光拉曼光谱检测技术,搭建了水体表面油膜厚度拉曼光谱检测系统。以532 nm激光作为激发光源,以常见的柴油和汽油为例研究了不同油品的拉曼光谱特性,研究结果表明,油膜拉曼光谱响应特性与油品密切相关,相同油膜厚度情况下不同油品的拉曼光谱曲线有明显的差异,97#汽油在1 651 cm-1光谱强度要高于90#汽油。随着油膜厚度的增加,柴油316和1 451 cm-1光谱强度和汽油1 651 cm-1拉曼位移光谱强度增加,油拉曼光谱信号变强;根据油水界面拉曼光谱特征,设计了油膜厚度计算因子,实验证明随着油膜厚度增加,油膜厚度计算因子r_film呈下降趋势。可以将油膜厚度计算因子作为水体表面油膜厚度测量的一种依据。     

Depth resolution improvement of streak tube imaging lidar system using three laser beams

The work proposes a three-laser-beam streak tube imaging lidar system. Besides the main measuring laser beam,the second beam is used to decrease the error of time synchronization. The third beam has n+0.5 pixels' difference compared to the main measuring beam on a CCD, and it is used to correct the error caused by CCD discrete sampling. A three-dimensional(3D) imaging experiment using this scheme is carried out with time bin size of 0.066 ns(i.e., corresponding to a distance of 9.9 mm). An image of a 3D model is obtained with the depth resolution of 2 mm, which corresponds to ~0.2 pixel.     

不同结构六边形斑图演化过程光谱特性

采用发射光谱法,研究了水电极介质阻挡放电中具有相同对称性的3种不同结构的六边形斑图演化过程的光谱特性。实验结果表明,随着外加电压的增加,放电首先形成六边形点阵斑图,然后是空心六边形斑图,最后是蜂窝六边形斑图。利用氩原子696.5 nm(2P_2→1S_5)谱线的展宽、氩原子763.2 nm(2P_6→1S_5)与772.1 nm(2P_2→1S_3)两条谱线强度比法和氮分子第二正带系(C~3Π_u→B~3Π_g)的发射谱线,研究上述3种斑图的电子密度、电子激发温度及分子振动温度。结果发现,随着外加电压的升高,六边形点阵斑图、空心六边形斑图和蜂窝六边形斑图的电子密度逐渐减小,而电子激发温度和分子振动温度逐渐增加。等离子体状态的改变直接影响着斑图的自组织。     

Ab initio path-integral molecular dynamics and the quantum nature of hydrogen bonds

The hydrogen bond(HB) is an important type of intermolecular interaction, which is generally weak, ubiquitous,and essential to life on earth. The small mass of hydrogen means that many properties of HBs are quantum mechanical in nature. In recent years, because of the development of computer simulation methods and computational power, the influence of nuclear quantum effects(NQEs) on the structural and energetic properties of some hydrogen bonded systems has been intensively studied. Here, we present a review of these studies by focussing on the explanation of the principles underlying the simulation methods, i.e., the ab initio path-integral molecular dynamics. Its extension in combination with the thermodynamic integration method for the calculation of free energies will also be introduced. We use two examples to show how this influence of NQEs in realistic systems is simulated in practice.     

Dynamics of a three-level V-type atom driven by a cavity photon and microwave field

We discuss the dynamics of a three-level V-type atom driven simultaneously by a cavity photon and microwave field by examining the atomic population evolution. Owing to the coupling effect of the cavity photon, periodical oscillation of the population between the two upper states and the ground state takes place, which is the well-known vacuum Rabi oscillation. Meanwhile, the population exchange between the upmost level and the middle level can occur due to the driving action of the external microwave field. The general dynamic behavior is the superposition of a fast and a slow periodical oscillation under the cooperative and competitive effect of the cavity photon and the microwave field. Numerical results demonstrate that the time evolution of the population is strongly dependent on the atom–cavity coupling coefficient g and Rabi frequency ?_e that reflects the intensity of the external microwave field. By modulating the two parameters g and ?_e, a large number of population transfer behaviors can be achieved.     

硬X射线相位光栅的设计与研制

针对在普通实验室和医院实现40—100keVX射线相衬成像的需求,考虑到成像系统参数、X射线源空间相干特性及光栅衍射效率,设计出硅基相位光栅结构参数.利用我们已发展的光助电化学刻蚀技术研制出直径为5英寸的相位光栅,其空间周期为5.6μm,线宽为2.8μm,深度为40—70μm.在理论分析的基础上,通过提高硅片两端有效工作电压和修正Lehmann电流密度公式,解决了实际刻蚀过程中出现的钻蚀问题.由实验结果可知,本方案对制作大面积高精度相位光栅十分有效。     

Density and impurity profile behaviours in HL-2A tokamak with different gas fuelling methods

The electron density profile peaking and the impurity accumulation in the HL-2A tokamak plasma are observed when three kinds of fuelling methods are separately used at different fuelling particle locations. The density profile becomes more peaked when the line-averaged electron density approaches the Greenwald density limit n_G and, consequently, impurity accumulation is often observed. A linear increase regime in the density range n_e< 0.6n_G and a saturation regime in n_e > 0.6n_G are obtained. There is no significant difference in achieved density peaking factor f_ne between the supersonic molecular beam injection (SMBI) and gas puffing into the plasma main chamber. However, the achieved f_ne is relatively low, in particular, in the case of density below 0.7n_G, when the working gas is puffed into the divertor chamber. A discharge with a density as high as 1.2n_G, i.e. n_e = 1.2n_G, can be achieved by SMBI just after siliconization as a wall conditioning. The metallic impurities, such as iron and chromium, also increase remarkably when the impurity accumulation happens. The mechanism behind the density peaking and impurity accumulation is studied by investigating both the density peaking factor versus the effective collisionality and the radiation peaking versus density peaking.     

无序二维约瑟夫森结阵列中磁场引起的涡旋玻璃态相变

采用电阻阻错结的无序二维约瑟夫森结阵列模型,数值研究超导薄膜中垂直磁场引起的涡旋运动.通过分析磁场激发产生的涡旋度Ne及低频电压噪声S₀的变化特性,得到如下结论：在无序超导体中固定温度不变,随着磁场的减弱涡旋液态经过准有序的布拉格相,涡旋玻璃相重新进入到低磁场下的钉扎稀磁液相. 由于在涡旋玻璃相中,电流驱动下的噪声值表现出一个峰,表明系统处于无序与有序相互竞争的亚稳态,并且临界电流应有峰值效应. 计算得到噪声值的变化与Okuma等得到的无序超导Mo_xSi_1-x膜实验现象一致,并能解释磁场降低引起的重新进入钉扎的稀磁液相行为. 关键词： 约瑟夫森结阵列 磁通玻璃 重新进入 峰值效应