Electrophoretic NMR studies of polymer and surfactant systems

The aim of this tutorial review is to introduce to a broader readership the emerging technique of electrophoretic NMR (eNMR). The "electrophoretic" element of the technique refers to the fact that charged particles are induced to flow by the application of an electric field. This flow is measured using pulsed-gradient spin-echo NMR (PGSE-NMR). The great potential of this experimental approach is the fact that NMR is chemically selective and non-invasive. eNMR, especially when combined with the more established PGSE-NMR experiment, may therefore be used to quantify the structure of multi-component systems via the dynamics and charge of each species within a complex mixture. Accordingly, eNMR is likely to be of great significance for colloid scientists, biologists, technologists and formulation scientists.     

Phase behavior of mixtures of polyoxyethylene(10) stearyl ether (Brij-76), 1-butanol, isooctane, and mixed polar solvents I. Water and formamide (or N,N-dimethyl formamide)

The isothermal phase diagram of the quaternary system polyoxyethylene(10) stearyl ether (Brij-76)/1-butanol/isooctane/water has been constructed at 30 degrees C with equal amounts of oil and water. A regular fishtail diagram was obtained, confirming the establishment of hydrophile-lipophile balance (HLB) in the system. Mixing of formamide (FA) [or N,N-dimethyl formamide (DMF)] with water as a cosolvent altered the HLB and decreased the solubilization capacity of the quaternary system. No three-phase body appeared at high FA or DMF content. Similar observations were noted for temperature-induced phase diagrams. The effect of DMF was more pronounced than that of FA in reducing the maximum solubilization capacity. The results have been summarized on the basis of HLB and mutual solubility of the components.     

Ir-catalyzed functionalization of 2-substituted indoles at the 7-position: nitrogen-directed aromatic borylation

Ir-catalyzed borylation of 2-substituted indoles selectively yields 7-borylated products in good yields. N-Protection, required for previous functionalizations of 2-substituted indoles, is unnecessary.     

Di-organoiron mixed valent complexes featuring "(eta2-dppe)(eta5-C5Me5)Fe" endgroups: smooth class-III to class-II transition induced by successive insertion of 1,4-phenylene units in a butadiyne-diyl bridge

The synthesis and study of a new redox family of symmetric dinuclear iron(II/III) complexes featuring "(eta(2)-dppe)(eta(5)-C(5)Me(5))Fe(CC)" endgroups connected by a bis(diethynyl)-4,4'-biphenyl spacer are reported. The solid-state structures were determined (X-rays) for the homovalent Fe(II)/Fe(II) and Fe(III)/Fe(III) parents. In contrast, the mixed valent (MV) complex 5[PF(6)] has a low thermodynamic stability (Kc around 10) and cannot be isolated in a pure form, but was studied in solution. According to the Robin and Day classification, it constitutes a remarkable example of well-behaved weakly coupled class-II organometallic MV compound. The photodriven metal-metal electron-transfer process takes place over ca. 16 A and corresponds to an electronic coupling of ca. 150 cm(-1) with a reorganization energy of ca. 6250 cm(-1) in dichloromethane. A similar investigation was also conducted in the near-IR range for the known and much more stable MV analogue 3[PF(6)] featuring the 1,4-phenyl unit instead of the 4,4'-biphenyl one (K(c) = 2.6 10(4)). The latter also exhibits a localized valency, but presents a very intense intervalence charge-transfer band (IVCT) with a cutoff on the low-energy side. A much stronger electronic coupling is derived (ca. 1700 cm(-1)) from the band shape for this MV complex in the frame of the two-level model. Although slowed, the electron exchange is not disrupted by insertion of an additional para-phenylene moiety into a 1,4-diethynylaryl bridge. Thus, starting from a compound with a butadiyne-diyl spacer, stepwise para-phenylene insertions in the bridge produce a smooth Class-III to Class-II transition for the corresponding MV complexes.     

TCF selenium preconcentration in geological materials for determination at sub-mugg(-1) with INAA (Se/TCF-INAA)

In geological samples, Se concentration ranges from 1 × 10⁻⁹ g g⁻¹ up to 1 × 10⁻³ g g⁻¹. The analytical difficulty at low concentration (<1 μg g⁻¹), is one of the main reasons why the geological cycle of Se is poorly known. The analytical method that consisted of preconcentration of Se with thiol cotton fiber (TCF) followed by graphite furnace atomic absorption spectrometry (GFAAS) has been modified by finishing with instrumental neutron activation analysis (INAA). The modified technique involves sample dissolution (HF-HNO₃-H₂O₂) and evaporation to dryness at low temperature (55-60 °C) to avoid selenium volatilization. Se^VI is converted to Se^IV by adding 6 M HCl to the dry residuum and the solution is then heated in a covered boiling bath (95-100 °C). The solution is diluted to obtain 0.6 M HCl and then collected on TCF. The TCF is placed in a polyethylene vial for irradiation in the SLOWPOKE II reactor (Montréal) for 30 s at a neutron flux of 10¹⁵ m⁻² s⁻¹. The 162 keV peak of ^77mSe (half-life 17.36 s) is read for 20 s after a decay of 7 s. The amount of sample to be dissolved is controlled by two competing effects. To obtain low detection limits, a larger amount of sample should be dissolved. On the other hand, the TCF could become saturated with chalcophile elements when large sample is used. Sulfur is a good indicator of the amount of Se and chalcophile elements present. In S poor sample (<100 μg g⁻¹) 3.0 g of sample was used and the L_D was ∼2 ng g⁻¹. In S high samples (>1.5% S) 0.05 g of sample was used and the L_D was ∼120 ng g⁻¹. The present work also includes suggested Se concentration for eight international geological reference materials (IGRM) that compare favorably with literature values.     

Long-term carrier-envelope phase stability from a grating-based, chirped pulse amplifier

We demonstrate a carrier-envelope phase (CEP) stabilized, chirped pulse laser amplifier that exhibits greatly improved intrinsic long-term CEP stability compared with that of other amplifiers. This system employs a grating-based stretcher and compressor and a cryogenically cooled laser amplifier. Single-shot carrier envelope phase noise measurements are also presented that avoid underestimation of this parameter caused by fringe averaging and represent a rigorously accurate upper limit on CEP noise.     

用纳米压痕法分析溶剂对聚醚醚酮(PEEK)力学性能的影响

Poly (ether ether ketone)(PEEK) is a high-performance semi-crystalline thermoplastic polymer.Exposure of the polymeric surface to solvents can have a strong effect like softening/swelling of polymeric network or dissolution.In this study,nano-indentation analysis was performed to study the effect of acetone on the surface mechanical properties of PEEK using different exposure time.The experiments were performed with a constant loading rate (10 nm/s) to a maximum indentation displacement (1000 nm).A 30-second hold segment was included at the maximum load to account for any creep effects followed by an unloading segment to 80% unloading.The indentation hardness and the elastic modulus were computed as a continuous function of the penetration displacement in the continuous stiffness mode (CSM) indentation.The experimental data showed that the peak load decreased from ~5.2 mN to ~1.7 mN as exposure time in solvent environment increased from 0 to 18 days.The elastic modulus and the hardness of PEEK samples also displayed a decreasing trend as a function of exposure time in the solvent environment.Two empirical models were used to fit the experimental data of hardness as a function of exposure time which showed a good agreement with the experimental values.     

Recent advances in sulfotransferase enzyme activity assays

Sulfotransferases are enzymes that catalyze the transfer of sulfo groups from a donor, for example 3'-phosphoadenosine 5'-phosphosulfate, to an acceptor, for example the amino or hydroxyl groups of a small molecule, xenobiotic, carbohydrate, or peptide. These enzymes are important targets in the design of novel therapeutics for treatment of a variety of diseases. This review examines assays used for this important class of enzyme, paying particular attention to sulfotransferases acting on carbohydrates and peptides and the major challenges associated with their analysis.     

Synthesis, structural characterization and catalytic activity of a multifunctional enzyme mimetic oxoperoxovanadium(V) complex

The synthesis and structural characterization of a novel oxoperoxovanadium(V) complex [VO(O(2))(PAH)(phen)] containing the ligands 2-phenylacetohydroxamic acid (PAHH) and 1,10-phenanthroline (phen) has been accomplished. The oxoperoxovanadium(V) complex was found to mimic both vanadate-dependent haloperoxidase (VHPO) activity as well as nuclease activity through effective interaction with DNA. The complex is the first example of a structurally characterized stable oxoperoxovanadium(V) complex with a coordinated bi-dentate hydroximate moiety (-CONHO(-)) from 2-phenylacetohydroximate (PAH). The oxoperoxovanadium(V) complex has been used as catalyst for the peroxidative bromination reaction of some unsaturated alcohols (e.g. 4-pentene-1-ol, 1-octene-3-ol and 9-decene-1-ol) in the presence of H(2)O(2) and KBr. The catalytic products have been characterized by GC-MS analysis and spectrophotometric methods. The DNA binding of this complex has been established with CT DNA whereas the DNA cleavage was demonstrated with plasmid DNA. The interactions of the complex with DNA have been monitored by electronic absorption and fluorescence emission spectroscopy. Viscometric measurements suggest that the compound is a DNA intercalator. The nuclease activity of this complex was confirmed by gel electrophoresis studies.     

Identification and structural elucidation of two process impurities and stress degradants in darifenacin hydrobromide active pharmaceutical ingredient by LC-ESI/MS(n)

The present study describes the identification and characterization of two process impurities and major stress degradants in darifenacin hydrobromide using high performance liquid chromatography (HPLC) analysis. Forced degradation studies confirmed that the drug substance was stable under acidic, alkaline, aqueous hydrolysis, thermal and photolytic conditions and susceptible only to oxidative degradation. Impurities were identified using liquid chromatography coupled with ion trap mass spectrometry (LC-MS/MS(n)). Proposed structures were unambiguously confirmed by synthesis followed by characterization using nuclear magnetic resonance spectroscopy (NMR), infrared spectroscopy (IR) and elemental analysis (EA). Based on the spectroscopic, spectrometric and elemental analysis data, the unknown impurities were characterized as 2-{1-[2-(2,3-dihydrobenzofuran-5-yl)-2-oxo-ethyl]-pyrrolidin-3-yl}-2,2-diphenylacetamide (Imp-A), 2-[1-(2-benzofuran-5-yl-ethyl)-pyrrolidin-3-yl]-2,2-diphenylacetamide (Imp-B), 2-{1-[2-(2,3-dihydrobenzofuran-5-yl)-ethyl]-1-oxy-pyrrolidin-3-yl}-2,2-diphenylacetamide (Imp-C) and 2-{1-[2-(7-bromo-2,3-dihydrobenzofuran-5-yl)-ethyl]-pyrrolidin-3-yl}-2,2-diphenylacetamide (Imp-D). Plausible mechanisms for the formation and control of these impurities have also been proposed. The method was validated as per regulatory guidelines to demonstrate specificity, sensitivity, linearity, precision, accuracy and the stability-indicating nature. Regression analysis showed a correlation coefficient value greater than 0.99 for darifenacin hydrobromide and its impurities. The accuracy of the method was established based on the recovery obtained between 86.6 and 106.7% for all impurities.