Thermal and spectroscopic investigation of europium and samarium sulphates hydrates by TG-FTIR and ICP-MS techniques

The investigation of europium(III) sulphate hydrate and samarium(III) sulphate hydrate was performed by thermal analysis (TG-DTG) and simultaneous infrared evolved gas analysis-Fourier transformed infrared (EGA-FTIR) spectroscopy. The TG, DTG and DTA curves were recorded at the 25–1400 °C in the dynamic air atmosphere by TG/DTA analyser. The infrared evolved gas analysis was obtained on the FTIR spectrometer. Eu₂(SO₄)₃·nH₂O (n = 3.97) and Sm₂(SO₄)₃·nH₂O (n = 8.11) were analysed, the dehydration and decomposition steps were investigated and the water content was calculated. The formation of different oxysulphates was studied.

The trace rare earth elements in Eu and Sm sulphates were determined by ICP-MS. The concentration of trace Eu, Sm, La, Gd, Y and Ce ranged from 3.9 × 10⁻⁶ to 1.5 × 10⁻⁴% (m/m).     

Analysis of blackbody-like radiation from laser-heated gas-phase tungsten nanoparticles

Thermal (blackbody-like) radiation that originated from laser-heated tungsten nanoparticles was measured using optical emission spectroscopy. The nanoparticles were generated via ArF excimer laser-assisted photolytic decomposition of WF6/H2/Ar gas mixtures, and the laser heating was applied parallel to the deposition. The temperature of the nanoparticles was determined, and its dependence on time, with respect to the 15-ns laser pulse (full width at half-maximum, fwhm) and laser fluence (phi), has been presented. At phi > 90 mJ/cm2, the particles reached the melting point (shortly after the laser pulse). Dominant cooling mechanisms, such as evaporation (above approximately 3000 K) and a combination of heat transfer by the ambient gas and radiative cooling (below approximately 3000 K), were observed for the nanoparticles, which were approximately 10 nm in diameter. The degree of inelasticity for the (predominantly) argon-gas collisions and the total emissivity of the particles (in the 2500-3000 K temperature region) could also be derived. The measured cooling rate and temperature data indicate that, depending on experimental parameters, evaporation and surface reactions can have a definite effect on the growth of particles.     

Capillary zone electrophoresis of cationic and anionic drugs in methanol

The actual mobilities and dissociation constants of acidic and basic pharmaceuticals were determined in methanol. Actual mobilities were derived from the dependence of the effective mobilities of the analytes on the pH of the methanolic background electrolyte solution (pH(MeOH)). The pKa values of the pharmaceuticals in methanol (pK(a,MeOH)) were calculated by non-linear curve fitting to the measured mobility values. It was found that the shift in pKa value (when compounds were transferred from water to methanol) increased with the acidity of the analyte. The average pKa shift for compounds exhibiting acidic properties in water was ca. 5.5 units, and the shift for basic compounds about 2 units. As was shown for a mixture of beta-blockers, the calculated actual mobilities and pKa values can be utilised in the optimisation of pH conditions for separation. The practical value of the method was illustrated by the analysis of urine samples.     

Studies of copper(II) sulphide ion-selective electrodes

Changes in liquid junction potentials in copper(II) solutions were measured when different reference electrodes were used. The slope and intercept of a calibration curve for a copper-selective electrode will depend on the selection of reference electrode. The condition of the electrode surface of an Orion copper-selective electrode was studied microscopically and the influence of redox potential on stability of the electrode against corrosion is discussed. Oxidizing solutions will produce pits at dislocations in the material and there will be a mixed electrode potential. The slope, stability, and speed of response are much lower when the surface contains pits. Diamond-polishing was shown to improve the electrode significantly.     

NMR studies of conformations and dynamic processes—II : [26]Bicyclophanes with ethylene bridges

The conformations and dynamic processes in two bicyclophanes have been analysed on the basis of temperature-dependent ¹H NMR spectra. Both bicyclophanes are suggested to have a lowest-energy conformation of D₃ symmetry in which the substituents at all ethylene bridges are gauche⁺ (or gauche^?) oriented. The interconversion of the mirror image conformers of each bicyclophane equilibrates the two hydrogens in each methylene group, the barriers being ca 36 and 37 kJ mol^?1, respectively, as determined by line-shape analysis.     

Stress development during drying of calcium carbonate suspensions containing carboxymethylcellulose and latex particles

Stress development during drying of coatings produced from aqueous dispersions of calcium carbonate particles in the presence and absence of organic binders was studied using a controlled-environment stress apparatus that simultaneously monitored drying stress, weight loss, and relative humidity. Specifically, the influence of two organic binders on drying stress evolution was investigated: (1) carboxymethylcellulose, a water-soluble viscosifying aid, and (2) a styrene-butadiene latex emulsion of varying glass transition temperature. The stress histories exhibited three distinct regions. First, a period of stress rise was observed, which reflected the capillary tension exerted by the liquid on the particle network. Second, a maximum stress was observed. Third, it was followed by a period of either stress decay or rise depending on the organic species present. Significant differences in stress histories were observed between coatings containing soluble and nonsoluble binders. Maximum drying stresses (sigmamax) of 0.2-0.5 MPa were observed for coatings produced from pure calcium carbonate or calcium carbonate-latex suspensions, whereas coatings with carboxymethylcellulose exhibited substantially higher sigmamax values of 1-2 MPa. Upon drying, these coatings were quite hygroscopic, such that cyclic variations in relative humidity induced large cyclic changes in residual stress.     

Micellar electrokinetic capillary chromatography using polymeric hollow fibers

Summary In this paper, polymeric hollow fibers prepared from pH-stable polypropylene were used as columns for micellar electrokinetic capillary chromatography (MECC). The electroosmotic flow (EOF) for polypropylene hollow fibers was evaluated in the pH range of 5.0–12.0. With untreated polypropylene hollow fibers a stabilized but enhanced EOF was achieved when SDS was used in the buffer, decreasing the separation window for uncharged substances in MECC to impractical levels. Uncharged acrylamide and charged 2-acryloylamido-2-methylpropane sulfonic acid surface modifications were used to lower the strength of the EOF, increase the separation window and prevent local overheating that could melt the column wall.     

Prospects of thermal analysis in polymer research

A survey and an analysis of the publications concerned in thermal analysis (TA) published in four renowned journals during the years 1965–1974 were performed. The published data were evaluated from three points of view: TA methods used for polymers, properties and phenomena studied by TA methods, types of polymers investigated by TA methods. From the statistical data were derived the future trends for the application of particular TA methods in polymer science.     

Enantiomers of polarized alkenes: chromatographic enrichment and thermal interconversion

(+)- and (?)-$\text{1}$ as well as (+)- and (?)-$\text{2}$ were partially separated by liquid chromatography on triacetylcellulose; racemizations resulted in the barriers (Table 2) to rotation via planarized transition states.     

The crystal structure of Hf3As

Hf₃As has a monoclinic unit cell of dimensions a = 15.3898(14) Å, b = 5.3795(5) Å, c = 15.330(14) Å, β = 90.291(6)°. A structure proposal based on space group $\text{C2}\text{c}$ (No. 15) has been refined by the least-squares method using a Rietveld-type fullprofile analysis of Guinier-Hägg X-ray powder film intensity data. The Hf₃As structure is an intermediate between the Fe₃P and the Ti₃P types. The atomic coordination follows rules formulated earlier for representatives of the Fe₃PTi₃PV₃S family of structures.