Why and how to avoid standard kinetic equations I. Principles and band conduction problem

A review of ideas leading to full rejection of any finite or partially-infinite order kinetic equation linearized in external field is given on grounds of the time-convolution Generalized Master Equations (GME). By two examples (two-level and band conduction problem), it is shown how standard kinetic equations result from GME in the lowest order approximations which obscure, however, a direct correspondence with the Kubo linear response theory. Without approximations, on the other hand, the rigorous approach is shown to be fully equivalent with the Kubo results. It is argued and illustrated that usual technical simplicity and seeming physical lucidity of standard theories (connected with the presence of field-independent transfer or scattering rates in the fielddependent linearized theory) are just owing to structural features which are solely due to the lowest order approximations involved. These features (i.e. also the possibility of standard physical interpretation of kinetic phenomena) are proved to disappear completely as far as the theory goes properly to higher orders.     

Unavoidable Traces Of Set Systems

Sauer, Shelah, Vapnik and Chervonenkis proved that if a set system on n vertices contains many sets, then the set system has full trace on a large set. Although the restriction on the size of the groundset cannot be lifted, Frankl and Pach found a trace structure that is guaranteed to occur in uniform set systems even if we do not bound the size of the groundset. In this note we shall give three sequences of structures such that every set system consisting of sufficiently many sets contains at least one of these structures with many sets.     

On I-fuzzy topologies derived from a decreasing family of I-topologies

The aim of this paper is to study I-fuzzy topologies (fuzzy topologies in ostak's sense) derived from decreasing families of I-topologies (fuzzy topologies in Chang's sense), defined on a set X.     

Evidences of phase separation in moisture‐cured poly(urethane urea)s by means of temperature modulated differential scanning calorimetry

The degree of phase separation in several moisture‐cured poly(urethane urea)s (PUUs) was studied by FTIR spectroscopy, wide angle X‐ray diffraction (WAXD), and temperature‐modulated differential scanning calorimetry (TMDSC). This latter technique was shown to be particularly useful in analysing the degree of phase separation in PUU polymers. Both phase mixing and phase segregation coexisted in the PUUs and the degree of phase separation increased as the urea hard segment (HS) content in the PUU increased. The maximum solubility of urea HSs into the polyol soft segments (SSs) was achieved for 50 wt % urea HS content in diol‐based PUUs, whereas for triol‐based PUUs the highest solubility between HS and SS was reached for lower urea HS amount. Finally, the higher the urea HS content the higher the extent of phase separation in the PUU. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 3034–3045, 2007     

Book rewiev

Howard Anton and Robert C. Busby, John Wiley & Sons, Inc., 2002.     

Mechanisms of n‐butanol formation in butyl acrylate latexes

The mechanisms involved in the formation of n‐butanol during the synthesis of butyl acrylate containing latices were investigated. The experimental results showed that neither the hydrolysis of butyl acrylate nor of the ester bond in the butyl acrylate segments of the polymer played a major role in the formation of n‐butanol, which was mainly generated from the polymer backbone, by transfer reactions to polymer chain followed by cyclization. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 5838–5846, 2007     

Magnetic poly(N‐isopropylacrylamide) microspheres by dispersion and inverse emulsion polymerization

The aim of this study was to develop novel thermally responsive polymer microspheres with magnetic properties. Dispersion and inverse emulsion copolymerization of N‐isopropylacrylamide (NIPAAm) and N,N′‐methylenebisacrylamide (MBAAm) was investigated in the presence of γ‐Fe₂O₃ nanoparticles. The resulting microspheres were characterized in terms of morphology, size, polydispersity, iron content, and temperature‐dependent swelling using optical microscopy, transmission electron microscopy, scanning electron microscopy, QELS, and AAS. The effects of several variables, such as the concentration of γ‐Fe₂O₃, MBAAm crosslinking agent, Span 80 surfactant, 2,2′‐azobis(2‐methyloctanenitrile) (AMON) initiator, and polymerization temperature on the properties of the microspheres were studied. Swelling and thermoresponsive behavior of the microspheres containing γ‐Fe₂O₃ nanoparticles were also investigated. The microspheres contained about 8 wt % of iron. The presence of magnetic nanoparticles and their concentration changes did not have any significant effect on the temperature sensitivity of the composites. The particles gradually shrink into an increasingly collapsed state when the temperature is raised to 40 °C since the increase in temperature weakens the hydration and PNIPAAm chains gradually become more hydrophobic, which leads to the collapse of the particles. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 5884–5898, 2007     

Arsenic determination in marine sediment using ultrasound for sample preparation.

This work deals with As determination in marine sediment using ultrasound for sample preparation. It is shown that As can be quantitatively extracted from marine sediment using 20% (v/v) HCl and sonication. The slurry is centrifuged and the analyte is determined in the supernatant by hydride generation atomic absorption spectrometry (HG AAS). A flow injection (FI) system is employed for hydride generation, with 0.5% (m/v) NaBH(4) used as reducdant and a 20% (v/v) HCl used as sample carrier. The limit of quantification is 1.6 microg g(-1) of As, which is based on 800 microl of sample solution and 0.200 g of sample mass in a volume of 50 mL. Certified and non certified marine sediment samples were analyzed; the results were in accordance with the certified or reference values. Speciation analysis by HPLC-ICP-MS showed that As(V) is the only detectable As species present in the supernatant of the centrifuged sample.     

On the condensate values in QCD

Conclusions The sets (3) and (4) of condensates have been compared using the QCD sum rules (2) with indefinite weight functions. A bad matching between both sets of condensates and experimental data has been obtained. The standard values (3) appear to be closer to data but some increase ofQ is necessary to improve the agreement. Only higher values ofm ₀ ² could change the results of this analysis. It is interesting that negative values ofm ₀ ² considerably improve the agreement with data; note that this quantity cannot be determined with a sufficient accuracy. We conclude that the QCD sum rules (2) cannot definitely determine a privileged set of condensates.Dedicated to Academician Václav Votruba on the occasion of his eightieth birthday.