Novel electroanalytical techniques for pollution analysis

Summary Two new analytical techniques are described. The so-called injection technique operates on evaluating a dynamic concentration signal as a result of following the concentration change in a certain part of a flow-through channel after injecting a sample or reagent at a small volume into the current of an appropriate solution flowing at a constant rate.The second technique, the programmed coulometric titration technique, also uses the flow-through channel principle; that means this novel technique allows the more precise titrimetric way of analysis in flowing solutions. In the case of both techniques potentiometric and voltammetric detectors were involved. Several examples proved the multifold advantages of these techniques for environmental analysis.

---

Neue elektroanalytische Verfahren für die Umweltanalyse

Zusammenfassung Zwei neue Methoden werden beschrieben. Die sog. Injektionstechnik wertet ein dynamisches Konzentrationssignal aus, das sich aus der Änderung in einem Durchflußkanal ergibt, wenn Probe oder Reagens in kleinen Volumina in einen konstant fließenden Flüssigstrom injiziert werden. Das zweite Verfahren, die programmierte coulometrische Titration, erlaubt die Anwendung der genaueren titrimetrischen Technik auf fließende Lösungen. Bei beiden Methoden werden potentiometrische und voltammetrische Detektoren verwendet. Mehrere Beispiele zeigen die vielfachen Vorteile dieser Verfahren bei der Anwendung auf die Analyse von Umweltmaterial.

Presented at the 6th Annual Symposium on Recent Advances in the Analytical Chemistry of Pollutants, April 21–23, 1976; Vienna, Austria     

Determination of the stability constants of uranyl complex with 8-hydroxyquinolinium sulfate

8-Hydroxyquinoline (8-HOQ) is known as an important chelating agent for several metal ions. This compound is practically insoluble in water. For this reason, in this study its water soluble sulfate salt has been used for complexing uranyl ions and the stability constants of the complex have been determined. The Irving-Rosotti method computing the Calvin-Bjerrum pH-titration data, was applied. Finally, the stability constants of the complex formed between (8-HOQN-H)₂SO₄ and uranyl ions were found to be lgK₁=8.25 and lgK₂=4.15, the overall stability constant being {ie55-1}.     

Droplet evaporation study applied to DNA chip manufacturing

DNA chips are potentially powerful technologies for genotyping and gene expression profiling that rely on comparative analyses of up to thousands of "spots of analysis" on a glass support. The spot quality throughout the support influences spot-to-spot variations within an array and the repeatability of data across experiments. For glass slide DNA microarrays, droplets of DNA solution are deposited on functionalized glass slides and left to react through complete evaporation of the droplet. On hydrophobic flat surfaces, different modes of droplet evaporation can be attained. Under atmospheric pressure, water droplets tend to evaporate under two main regimes. Initially, the droplet flattens with a constant contact area, and then the droplet shrinks at a constant contact angle. As a result, the diameter and morphology of thousands of spots on microarrays are not uniform. This leads to poor and unreliable data processing results. In this work, we report the evaporation of an aqueous solution under a constant contact area mode. Evaporation under reduced pressure and the effect of reagent additives to the solution have been investigated. Video microscopy and digital image analysis techniques were applied to monitor the evaporation of the droplets. A mixture of surfactants was developed to maintain a constant area regime during evaporation and to form homogeneous spots. The control of some physicochemical properties (wetting, evaporation rate) of the droplet allows the formation of well-controlled spots compatible with DNA grafting. The influence of surfactant molecules on the mechanisms of evaporation is also discussed.     

Assessment of drinking water radioactivity content by liquid scintillation counting: set up of high sensitivity and emergency procedures

In our institute, different procedures have been developed to measure the radioactivity content of drinking water both in normal and in emergency situations, such as those arising from accidental and terrorist events. A single radiometric technique, namely low level liquid scintillation counting (LSC), has been used. In emergency situations a gross activity screening is carried out without any sample treatment by a single and quick liquid scintillation counting. Alpha and beta activities can be measured in more than one hundred samples per day with sensitivities of a few Bq/L. Higher sensitivity gross alpha and beta, uranium and radium measurements can be performed on water samples after specific sample treatments. The sequential method proposed is designed in such a way that the same water sample can be used in all the stages, with slight modifications. This sequential procedure was applied in a survey of the Lombardia district. At first tap waters of the 13 largest towns were examined, then a more detailed monitoring was carried out in the surroundings of Milano and Lodi towns. The high sensitivity method for the determination of uranium isotopes was used to check the presence of depleted uranium in Lake Garda. Reduced equipment requirements and relative readiness of radiochemical procedures make LSC an attractive technique which can also be applied by laboratories lacking specific radiochemistry facilities and experience.     

Charge transfer across a polymer gel/liquid interface: determination of ionophores

An electrochemical method for the determination of the ionophores monensin and lasalocid was developed, based on the polarization of an agar gel/nitrobenzene electrolyte interface. The measured current corresponding to the facilitated ion transfer across this interface is directly proportional to the concentration of an ionophore dissolved in the organic phase. Using cyclic voltammetry in a three-electrode system the detection limit for both ionophores is about 3 × 10^?5 M.     

Esterification of C1−C8 carboxylic acids to n-butyl esters in aqueous solutions for their gas chromatographic analysis

Summary The esterification of C₁–C₈ fatty acid in aqueous solutions and in the presence of sulfuric or hydrochloric acid and with n-butanol is described. It has been established that the esterification can be used for the quantitative determination of these fatty acids in the concentration ratio range of [H₂O]/[n-BuOH]=0.01–5.3. In the concentration ratio range of 0.01–0.8 the water present does not interfere. In the concentration range of above 0.8 anhydrous sodium sulfate is used for binding the water, in the amount of [Na₂SO₄.anh.]/[H₂O]0.2.     

Synthesis and stereochemistry of stereoisomeric 1,3-benzoxazino-1,3- and -3,1-benzoxazines

Partly saturated 3,1-benzoxazino[1,2-c][1,3]benzoxazines and 1,3-benzoxazino[3,2-c][1,3]benzoxazines were prepared in one-pot syntheses from different cyclic 1,3-aminoalcohols by treatment with salicylaldehyde or 5-bromosalicylaldehyde, followed by formaldehyde. The structures of tetracycles 3a and 5 were determined by means of X-ray diffraction.     

Preparation and NMR spectra of substituted 2-phenyl-5,5-dialkylimidazolinones

Eighteen substituted 2-phenyl-5,5-dialkylimidazolinones 2 have been prepared by cyclizations of substituted 2-(N-benzoylamino)alkanamides 1. The cyclization of methylamides 1 proceeds at room temperature whereas primary amides are cyclized on boiling. The ¹H and ¹³C nmr spectra of the imidazolinones are presented and the changes in their spectra connected with their protonation in hexadeuteriodimethyl sulfoxide-trifluoroacetic acid mixtures are discussed.     

Bestimmung von Ascorbinsäure auf Grund ihrer in einem Landolt-System ausgeübten reduzierenden Wirkung

Zusammenfassung Im Bromat-Jodid-Ascorbinsäure-System hängt die Zeit, die bis zur Jodausscheidung vergeht, von der Konzentration der Ascorbinsäure ab. Unter entsprechenden Versuchsbedingungen ist die Reaktionszeit proportional der Ascorbinsäurekonzentration. Danach kann die Ascorbinsäure sowohl mit Hilfe der Simultankomparationsmethode, als auch chronometrisch bestimmt werden. Die Genauigkeit ist ± 3% im Bereich von 5 bis 300g/5 ml. Die Grenzen der Bestimmung sind 1g bzw. 1000g Ascorbinsäure in 5 ml.

---

Determination of ascorbic acid on the basis of its reducing action in a landolt system

Summary In the bromate-iodide-ascorbic acid system, the time that elapses until the iodine appears is dependent on the concentration of the ascorbic acid. Under appropriate experimental conditions, the reaction time is proportional to the ascorbic acid concentration. Accordingly, the ascorbic acid may be determined with the aid not only of the simultaneous comparison method but also chronometrically. The precision is ± 3% in the 5–300g/5 ml range. The limits of the determination are 1g and 1000g ascorbic acid in 5 ml respectively.

     

Effect of the specific activity of the tracer on rat luteinizing hormone radioimmunoassay

Rat luteinizing hormone /LH/ was labelled with¹²⁵I by the Chloramine T method.¹²⁵I-LH, used as tracer in radioimmunoassay, was separated from the labelling reaction mixture by gel filtration. By using the proper protein/radioiodine ratio in the labelling reaction mixture the specific activity of¹²⁵I-LH was adjusted to 2.5–20.5 MBq g^–1. The influence of the specific activity on the assay parameters as well as on the tracer stability was investigated.