Synthesis and mechanical properties of mechanically alloyed Al-Cu-Fe quasicrystalline composites

Al-Cu-Fe alloys were prepared by mechanical alloying starting from elemental powders in a high-energy planetary ball mill. Three different alloy compositions with the same c _Cu : c _Fe ratio of 2:1 but different aluminium contents, that is Al₅₅Cu₃₀Fe₁₅, Al₆₃Cu₂₅Fe₁₂ and Al₇₀Cu₂₀Fe₁₀, were investigated. A sequence of solid-state reactions resulting in quasicrystalline phase formation in Al₆₃Cu₂₅Fe₁₂ proceeds during milling and during annealing of the as-milled powder. These reactions were studied by X-ray diffraction, transmission electron microscopy and differential scanning calorimetry. In order to form an aluminium-matrix composite, Al₆₃Cu₂₅Fe₁₂ single-phase quasicrystalline powders were blended with different amounts of aluminium. In an intermediate milling step the powder blend was homogenized. The powders were consolidated by hot extrusion. The bulk samples revealed a homogeneous dispersion of the particles in the matrix but a rather heterogeneous size distribution. The mechanical properties at room temperature were tested by constant-rate compression tests. A rule-of-mixtures dependence of the ultimate strength and the yield strength on the volume fraction of the quasicrystalline particles was found.     

The lowest electronic states of Ne2 +, Ar2 + and Kr2 +: comparison of theory and experiment

Non-relativistic configuration interaction (CI) ab initio calculations using large basis sets have been carried out to determine the potential curves of the first electronic states of Ne₂ ⁺, Ar₂ ⁺ and Kr₂ ⁺. The spin—orbit interaction was treated assuming that the spin—orbit coupling constant is independent of the internuclear separation (R). For Ar₂ ⁺, calculated dissociation energies and equilibrium separations are in good agreement with experimental results. The calculations for Ne₂ ⁺ suggest that the lowest vibrational level of the I(1/2u) ground state observed by threshold photoelectron spectroscopy by Hall et al. [1995, J. Phys. B: At. molec. opt. Phys., 28, 2435] and assigned to either ν = 0 or ν = 2 actually corresponds to ν = 4. The calculations also predict the I(1/2g) state of Ne₂ ⁺ and Ar₂ ⁺ to possess a double-well potential and that of Kr₂ ⁺ to be repulsive at short range and to only possess a single shallow well at large internuclear separation. The ab initio calculations provide an explanation for the observation made by Yoshii et al. [2002, J. chem. Phys., 117, 1517] that Kr₂ ⁺ and Xe₂ ⁺ dissociate after photoemission from the II(1/2u) state to the I(1/2g) state whereas Ar₂ ⁺ does not.     

X-ray diffraction study of molybdenum diselenide to 35.9 GPa

In situ high-pressure angle dispersive synchrotron X-ray diffraction studies of molybdenum diselenide (MoSe₂) were carried out in a diamond-anvil cell to 35.9 GPa. No evidence of a phase transformation was observed in the pressure range. By fitting the pressure-volume data to the third-order Birch-Murnaghan equation of state, the bulk modulus, K_0T, was determined to be 45.7±0.3 GPa with its pressure derivative, K′_0T, being 11.6±0.1. It was found that the c-axis decreased linearly with pressure at a slope of −0.1593 when pressures were lower than 10 GPa. It showed different linear decrease with the slope of a −0.0236 at pressures higher than 10 GPa.     

Multiscale expansions in discrete world

In this paper, we show the attainability of KdV equation from some types of nonlinear Schrödinger equation by using multiscale expansions discretely. The power of this manageable method is confirmed by applying it to two selected nonlinear Schrödinger evolution equations. This approach can also be applied to other nonlinear discrete evolution equations. All the computations have been made with Maple computer packet program.     

Determination of some trace metals with a new synthesized polymer resin by FAAS in various tea and herbal plants samples

In this work, a new polymer resin with a functional groups capable of holding trace metals has been synthesized. The structure of polymer resin has been examined by BET-N₂ method analyzer, IR spectrometer, scanning electron microscope (SEM) and elemental microanalyser. The synthesized polymer resin was used for the simultaneous separation and preconcentration of the trace metals from various tea and herbal plants samples. After extraction process, flame atomic absorption spectrometry (FAAS) was used to determine the trace metals. The analytical parameters and solid phase extraction (SPE) performance such as pH, sample volume, flow rates of sample, flow rates of eluent, concentration, volume and type of eluent and effect of interference ions, were investigated. The limits of detection (DL) of the SPE procedure for trace metals, were calculated to be (3s) in the range of 0.9?4.0 μg L^?1 (n = 21) and the factors of preconcentration (PF) were obtained at 200 for Cd, Co, Cu, Fe, Ni and Zn, and at 50 for Cr, Mn and Pb ions and the relative standard deviation (RSD) at ≤ 2% (n = 11).     

A Study of Adsorption of Water Vapour on Wool under Static and Dynamic Conditions

Adsorption of water vapour on wool provides not only textile comfort, but also convenience in transportation due to increase in its bulk density. The adsorption and desorption isotherms of water vapour for wool were determined by both volumetric technique using a Coulter Omnisorp 100CX instrument and gravimetric method employing a Cahn 2000 electronic microbalance. Adsorption isotherm fitting to B.E.T. model and hysteresis on desorption was observed. The average effective diffusion coefficient of water in wool was found to be 8.4 × 10^-14 m²s^-1 at 25°C from gravimetric data. The effects of packing height and air velocity on the breakthrough curves were also investigated in the wool packed columns. For pseudo first order model, k values changing between 0.33 × 10^-6 – 69 × 10^-6 s^-1 was obtained for 2.2–6.4 cm s^-1 air velocity and 0.05–0.20 m packing height ranges.     

Structural and spectral studies of N-trans-cinnamylidene-m-toluidine and N-trans-cinnamylidene-m-chloroaniline

N-trans-cinnamylidene-m-toluidine (1) C₁₆H₁₅N, and N-trans-cinnamylidene-m-chloroaniline (2) C₁₅H₁₂NCl form isomorphous crystals which are monoclinic, space group P2_l/c, with unit cell dimensionsa=5.967(2),b=13.793(3),c=15.048(5) Å, =91.97(3)° anda=5.868(2),b=13.788(4),c=15.191(4) Å, =91.87(3)°, respectively. The single-crystal X-ray structure determinations of the title compounds revealtrans structures. Ring (A) C_10–15 and ring (B) C_1–6, are practically planar in both structures with dihedral angels of 61.3(3) and 63.6(2)°, respectively.¹H nmr, u.v. and i.r. spectra are also reported.