An Infrared Spectroscopic Study on the Hofmann-diam-type 1,12-Diaminododecanemetal(II) Tetracyanonickelate(II)-aromatic Guest Clathrates: M(H2N(CH2)12NH2)Ni(CN)4ċG(M=Co, Ni or Cd; G = Benzene, Naphthalene, Anthracene, Phenanthrene or Biphenyl)

Three Hofmann-diaminododecane-type clathrates of the form M(1,12-diaminododecane) Ni(CN)₄G (M = Co, Ni or Cd; G = benzene, naphthalene, anthracene, phenanthrene or biphenyl) have been prepared in powder form. The 1,12-diaminododecane molecules in the host lattice permit the inclusion of bulky guest molecules. The spectral features suggest that these compounds are similar in structure to the other Hofmann-diam-type clathrates.     

Determination of trace elements in Na-bentonitic clay by INAA in Turkey

Instrumental neutron activation analysis was applied to the determination of trace elements in a Na-bentonitic clay. The irradiation was done in the Triga Mark II type reactor of ITU Nuclear Energy Institute. The sample was irradiated in two steps for short- and long- lived isotopes. After irradiation, spectra were taken using a germanium detector, multichannel analyzer Canberra System 100 and a fitting program called Sampo 90. The spectra of short-lived isotopes were analyzed to determine Al, Mg, Na, K, Ca, Ti elements and Mn, V trace elements. The spectra of long-lived isotopes were analyzed to determine Sc, Br, Sb, Cs, La, Ce, Sm, Yb, Hf, Pa, Np trace elements.     

Structural and Chemical Analysis of Materials with High Spatial Resolution

 An understanding of the correlation between microstructures and properties of materials require the characterization of the material on many different length scales. Often the properties depend primarily on the atomistics of defects, such as dislocations and interfaces. The different techniques of transmission electron microscopy allow the characterization of the structure and of the chemical composition of materials with high spatial resolution to the atomic level: high resolution transmission electron microscopy allows the determination of the position of the columns of atoms (ions) with high accuracy. The accuracy which can be achieved in these measurements depends not only on the instrumentation but also on the quality of the transmitted specimen and on the scattering power of the atoms (ions) present in the analyzed column. The chemical composition can be revealed from investigations by analytical microscopy which includes energy dispersive X-ray spectroscopy, mainly quantitatively applied for heavy elements, and electron energy-loss spectroscopy. Furthermore, the energy-loss near-edge structure of EELS data results in information on the local band structure of unoccupied states of the excited atoms and, therefore, on bonding. A quantitative evaluation of convergent beam electron diffraction results in information on the electron charge density distribution of the bulk (defect-free) material. The different techniques are described and applied to different problems in materials science. It will be shown that nearly atomic resolution can be achieved in high resolution electron microscopy and in analytical electron microscopy. Recent developments in electron microscopy instrumentation will result in atomic resolution in the foreseeable future.     

Natural radioactivity in soil samples of Kocaeli basin, Turkey

The city of Kocaeli is in the western part of Anatolia in Turkey and has a population of approximately 1.000.000. There is no information about radioactivity in the Kocaeli soils samples so far. For this reason, the concentrations of the natural radionuclides in soil samples from 27 different sampling stations in Kocaeli Basin and its surroundings have been determined. The results have been compared with other radioactivity measurements in different country"s soils. The typical concentrations of ¹³⁷Cs, ²³⁸U, ⁴⁰K, ²²⁶Ra, ²³²Th found in surface soil samples ranged from 2±0.6 to 25±6 Bq/kg, from 11±4 to 49±10 Bq/kg, from 161±30 to 964±127 Bq/kg, from 10±4 to 58±11 Bq/kg, and from 11±3 to 65±13 Bq/kg, respectively.     

Leaching of uranium with the H2O2-Na2SO4-H2SO4 (HSS) system and the efficiency of Acigol Lake water

The applicability of a new leaching method, the HSS (H₂O₂-Na₂SO₄-H₂SO₄) system, in the extraction of uranium from Saricaolu-Bergama Region low grade ore, and the efficiency of Acigol Lake (Denizli)-Turkey water as a natural source of Na₂SO₄ has been investigated. The effect of H₂SO₄ concentration, temperature, leaching time, H₂O₂ and Na₂SO₄ concentrations and the amount of Acigol Lake water on the extraction of uranium was examined. HSS was found suitable for the extraction of uranium from Saricaolu-Bergama Region samples and it was observed that the acid consumption could be decreased by adding Na₂SO₄.     

Peak area determination and energy dependence of gamma- and X-ray peak tailing

Two analytical shape functions representing the shapes of - and characteristic X-ray photopeak sides obtained with a Ge(Li) detector are described. The photopeak centroid is accurately determined by using these functions. Energy dependence of photopeak tailing at the lower energy side of the photopeaks are obtained by the least-squares fitting method. The present method can be used for the analysis of partly overlapped photopeaks, one side of which is well resolved, with a sufficient accuracy.     

NMR spectroscopy of organophosphorus compounds II: Stereochemistry of [1-(2H-azirin-2-yl)alkyl]phosphonates

Summary The conformation and relative configuration of [1-(2H-azirin-2-yl)alkyl]phosphonates (2) has been established by thorough investigation of some characteristic representatives of the series by¹H,¹³C,¹⁵N, and³¹P NMR spectroscopy. It is shown that the chemical shift of the proton located to the phosphonate group can be used as a criterion for the discrimination and stereochemical assignment of diastereoisomers. NMR spectroscopic features of the compounds are discussed in terms of structural relationships.Dedicated to Univ.-Prof. Dr.K. Schlögl with the best wishes to his 70^th birthday     

Quantitative determination of chloride by means of flow injection analysis with spectrophotometric detection in the UV/VIS range

Chloride is determined indirectly by Spectrophotometric flow injection analysis. Two systems are compared, both based on the principle of ion exchange of easily detectable anions versus chloride from suitable mercury salts. The first method is based on the exchange of chloride with chloranilate which is detected at 332 nm or at 306 nm in neutral or in acidic medium respectively. In the second case, chloride reacts with Hg(SCN)₂. The liberated thiocyanate forms a strongly coloured complex with Fe(III) in acidic solution with an absorption maximum at 460 nm. Both methods have a detection limit of about 5 mol Cl^–/l (175 ng/ml). In the case of the thiocyanate method, the relative standard deviation is about 2% (7 measurements) in the range of 5 to 150 mol/l and decreases significantly to a value of approximately 0.2% at higher concentrations; for the chloranilate method it is 10% for lower and about 1% for higher concentrations respectively.     

On input/output stabilization of singular integrodifferential systems

In this paper we consider a class of systems described by singular integrodifferential equations. This type of systems appear, for example, in the modeling of certain aeroelastic control problems. We study these systems in frequency domain framework and show the existence of finite-dimensional stabilizing controllers. An algorithmic procedure is outlined for the construction of such controllers. In order to illustrate the numerical aspects of this algorithm, we present an example involving the classical Theodorsen model of an airfoil, which fits in the class of systems considered here.This work was supported in part by the National Science Foundation under Grants DMS-8907019 and MSS-9203418.