Influence of nanodispersed boehmite on polypropylene photooxidation

Nanocomposites containing pure or organically modified nanoboehmites of different sizes were prepared by melt compounding with polypropylene. The samples were UV light irradiated in artificial accelerated conditions representative of solar irradiation (λ > 300 nm) at 60 °C in air. The chemical modifications resulting from photooxidation were followed by IR and UV-visible spectroscopies. The presence of pristine nanoboehmites was shown to change the rate of oxidation of polypropylene by reducing the oxidation induction period due to the presence of residual processing antioxidant. The differences of the oxidation induction periods between the nanocomposites and the pristine polymer disappear after solvent extraction of the antioxidant. The inefficiency of traditional antioxidant in retarding the photooxidation of polypropylene containing nanodispersed boehmite is proved. Antioxidant migration to the boehmite surface induced by the preferential interaction with the polar filler is proposed as an explanation. The oxidative behaviour of the organically modified boehmites was shown to depend on the type of organic substituent. p-Toluenesulfonate reduces the adsorption of antioxidants while the presence of a long-chain alkyl benzensulfonate increased the oxidation rate by generation of radical initiators.     

Thermal degradation of a highly chlorinated paraffin used as a fire retardant additive for polymers

The thermal degradation of a highly chlorinated paraffin, (Cl 70% w/w)(CP), used as a fire retardant additive for polymers, has been studied by TG, DTA and TVA. The main volatile degradation product is HCl which is eliminated in two steps. To 60–70% dehydrochlorination an apparent zero order reaction occurs with a detectable rate from 250°C, probably initiated at labile chlorine atoms. The apparent activation energy of the process is 40 kcal/mole. A charred residue containing 35% chlorine is obtained. This residue undergoes nearly complete dehydrochlorination in the range 300–600°C.     

Enhanced selectivity in Novozym 435 catalyzed kinetic resolution of secondary alcohols and butanoates caused by the (R)-alcohols

In esterifications of secondary alcohols catalyzed by immobilized lipase B from Candida antarctica (Novozym 435) the E-values decreased during the reaction. Hydrolysis of the corresponding butanoates showed the opposite effect. When an enantiopure (R)-alcohol, related but different, was added to the transesterification reaction, the E-value was significantly enhanced.     

Mechanism of thermal degradation of urea-formaldehyde polycondensates

The thermal degradation to 500°C of urea-formaldehyde polycondensate occurs in four successive steps. In each step, partial volatilisation takes place while the polymer undergoes chemical modification to give progressively more stable structures.Below 200°C methylene ether bridges are transformed into methylene bridges and branching and crosslinking reactions occur with maximum rates at 125°C and 165°C, respectively. Above 200°C radicals formed by chain scission induce the formation of cyclic structures in the polymer which undergoes extensive fragmentation above 300°C. Water, formaldehyde, carbon monoxide and dioxide, methane, ammonia, monomethylamine and trimethylamine are the gaseous products evolved.By combining data on the chemical modifications and gases evolved in each step, reaction mechanisms are proposed.     

Mechanistic study of thermal behavior and combustion performance of epoxy resins: I homopolymerized TGDDM

Tetraglycidyl 4,4′-diaminodiphenylmethane (TGDDM) undergoes homopolymerization on heating. Intramolecular reactions which compete with crosslinking favor the formation of cyclic structures with increasing thermal and fire resistance of the resin, whereas physical mechanical properties tend to decrease. The mechanism of thermal decomposition of TGDDM is studied by thermogravimetry, differential scanning calorimetry and thermal volatilization analysis with characterization of volatiles evolved and residue left. Thermal degradation of poly-(TGDDM) starts at 260°C with elimination of water from secondary alcoholic groups which is a typical pathway for epoxy resin degradation. Resulting unsaturations weaken bonds in the β-position and provoke the first chain breaking at allyl–amine and allyl–either bonds. With increasing temperature, saturated alkyl–ether bonds and alkyl carbon–carbon bonds are broken first, followed by the most stable alkyl–aryl bonds at T>365°C. The combustion performance of TGDDM is discussed on the basis of the thermal degradation behavior.     

Thermal degradation of poly(2,6-dimethoxycarbonyl-1,6-heptadiene)

The thermal degradation under vacuum of poly(2,6-dimethoxycarbonyl-1,6-heptadiene), a polymer which contains cyclic structural units, has been investigated. The analysis of the degradation products has shown that depolymerisation (depropagation along the polymer chain with formation of diene monomer) occurs extensively, together with other degradation reactions. A mechanism is proposed to account for the degradation products which have been identified.     

Thermal decomposition of 4,4′-diaminodiphenylsulphone

The thermal decomposition of 4,4′-diaminodiphenylsulphone (DDS) was studied by thermogravimetry, differential scanning calorimetry and thermal volatilisation analysis. Solid residues, high-boiling and gaseous products of degradation were collected at each step of thermal decomposition and analysed by infrared spectroscopy and gas chromatography/mass spectrometry.

On programmed heating at normal pressure, DDS starts to evaporate at 250°C. Thermal decomposition, which probably proceeds through homolytic scission of the S-C bond is simultaneously observed. The resulting sulphonyl radicals provoke polymerisation and cross-linking of the solid residue which undergoes a limited degradation at 350°C with elimination of heteroatoms N and S as volatile moieties. Above 400°C, the residue undergoes a complex charring process leading to an aromatic char typical of carbonised aromatic polymers.     

Effect of chlorinated fire-retardant additives on the thermal degradation of polypropylene

Modifications in the thermal degradation mechanism of polypropylene caused by interactions between the degrading polymer, a chloroparaffin and bismuth carbonate (typical fire retardant additives) are studied.Preliminary TVA and pyrolysis-GLC results show that volatilisation of the polymer occurs at lower temperatures with production of a larger proportion of higher boiling chain fragments in the mixture than in the pure polymer.The products of a strongly exothermal reaction occurring when the two additives are heated together, as shown by DTA and TG, could play an important role in modifying the thermal degradation behaviour of polypropylene in the mixture.     

Li/MgO catalysts: II. A DTA and TG study of precursors

The thermal decomposition of precursors of Li/MgO catalysts prepared from different Mg and Li compounds is reported. Dehydration and dehydroxylation is observed in both cases, in addition to decomposition of LiNO₃, but not of Li₂CO₃. The properties of the solids are related to the melting and spreading of LiNO₃ or Li₂CO₃ before or after Mg(OH)₂ dehydroxylation.

---

Li/MgO, Mg Li. LiNO₃, Li₂CO₃, . LiNO₃ Li₂CO₃ Mg(OH)₂.

     

Design of oxygen reduction bimetallic catalysts: ab-initio-derived thermodynamic guidelines

The Gibbs free energies of key elementary steps for the electrocatalytic oxygen reduction reaction (ORR) are calculated with B3LYP type of density functional theory: O2 + M + H+ + e- (0 eV) --> HOO-M (deltaG1), HOO-M + M --> HO-M + O-M (deltaG2), O2 + 2M + H+ + e- (0 eV) --> O-M + HO-M (deltaG3), and HO-M + O-M + 3H+ + 3e- (0 eV) --> 2H2O + 2M (deltaG4), where H+ is modeled as H3(+)O(H2O)3 and M stands for the adsorption site of a metal catalyst modeled by a single metal atom as well as by an M3 cluster. Taking Pt as a reference, deltaG4 is plotted against deltaG1 for 17 metals from groups V to XII. It is found that no single metal has both deltaG1 and deltaG4 more negative than Pt, although some of them have either more negative deltaG1 or more negative deltaG4. This enables us to explain thermodynamically why no other single metal catalyzes the ORR as effectively as Pt does. Moreover, a thermodynamic analysis reveals that the signs of delta deltaG (the difference between deltaG of other metals and deltaG of Pt) strongly correlate with the valence electronic structure of metals, i.e., delta deltaG1 < 0 and delta deltaG4 > 0 for metals M with vacant valence d orbitals, whereas delta deltaG1 > 0 and delta deltaG4 < 0 for metals M' with fully occupied valence d orbitals. Thus, a simple thermodynamic rule for the design of bimetallic catalysts for the ORR is proposed: couple a metal M (delta deltaG1 < 0) with a second metal M' (delta deltaG4 < 0) to form an alloy catalyst MM'3. The rationale behind this selection is based on M being more efficient for the rate-determining step, i.e., for the formation of the adsorbed species M-OOH, while M' can enhance the reductions of O and OH in the last three electron-transfer steps.