Configuration of the valence neutrons of 17B

The reaction cross section of ~(17)B on ~(12)C target at(43.7±2.4)MeV/u has been measured at the Radioactive Ion Beam Line in Lanzhou(RIBLL).The root-mean-square matter radius(R_(rms))was deduced to be(2.92±0.10)fm,while the R_(rms)of the core and the valence neutron distribution are 2.28 fm and 5.98 fm respectively.Assuming a"core plus 2n"structure in ~(17)B,the mixed configuration of(2s_(1/2))and(1d_(1/2))of the valence neutrons is studied and the s-wave spectroscopic factor is found to be(80±21)%.     

氨态氮、亚硝态氮对罗氏沼虾免疫相关酶类的影响

氨态氮和亚硝态氮是虾类养殖环境中最主要的污染物. 在1 mg/L 非离子氨态氮和1 mg/L 亚硝态氮的作用条件下, 罗氏沼虾血清、肝胰腺和肌肉中的酚氧化酶、超氧化物歧化酶、碱性磷酸酶及酸性磷酸酶活力变化不同, 经1、4、7 及10 天处理后, 血清和肌肉酚氧化酶活力均有所降低, 而肝胰腺的酚氧化酶活力则略有增高;各组织中的超氧化物歧化酶活力基本变化过程为, 先增高后降低;各组织的两种磷酸酶活力则有不同程度的增高. 酚氧化酶与超氧化物歧化酶活性可作为判断虾类免疫抗病能力的指标, 而两种磷酸酶活性则仅可作辅助参数.     

听觉频域掩蔽效应的自适应β阶贝叶斯感知估计语音增强算法

为了在噪声抑制和语音失真中之间寻找最佳平衡,提出了一种听觉频域掩蔽效应的自适应β阶贝叶斯感知估计语音增强算法,以期提高语音增强的综合性能。算法利用了人耳的听觉掩蔽效应,根据计算得到的频域掩蔽阈自适应调整β阶贝叶斯感知估计语音增强算法中的β值,从而仅将噪声抑制在掩蔽阈之下,保留较多的语音信息,降低语音失真。并分别用客观和主观评价方式,对所提出的算法的性能进行了评估,并与原来基于信噪比的自适应β阶贝叶斯感知估计语音增强算法进行了比较。结果表明,频域掩蔽的β阶贝叶斯感知估计方法的综合客观评价结果在信噪比为-10 dB至5 dB之间时均高于基于信噪比的自适应β阶贝叶斯感知估计语音增强算法。主观评价结果也表明频域掩蔽的β阶贝叶斯感知估计方法能在尽量保留语音信息的同时,较好的抑制背景噪声。      

阵列波导光栅平坦化的研究

阵列波导光栅的平坦化在实际应用中有很重要的意义.本文系统地研究了阵列波导光栅的平坦化.在输入波导、输出波导、阵列波导输入端与输出端上分别引入了指数型锥形波导.通过改变锥形波导的形状和尺寸来实现平坦化的优化.本文首先从理论上论述了引入指数型锥形波导的输出光谱特性,给出了结构参量的关系表达式,阐明了输入波导处的锥形波导是影响输出光谱平坦化的主要因素,阵列波导和输出波导处的锥形波导对输出光谱的平坦化有一定的影响.其次采用数值模拟的方法模拟了输出光谱,优化了结构参量,总结出了指数型锥形波导对平坦化影响的趋势和规律.模拟结果显示,输出光谱1 dB带宽大于通道间隔的50％,插入损耗从5.2 dB减小到了4.0 dB,串扰小于-30 dB.最后,本文给出了实验结果,插入损耗减小了0.87 dB,串扰减小了3.67 dB,1 dB带宽增加0.1 nm,增加了54.7％.实验结果表明引入指数型锥形波导提高了阵列波导光栅器件的光谱性能.     

Simulation of the Lanzhou Penning Trap LPT

The LPT (Lanzhou Penning Trap) is under construction and its task is to perform direct mass measurement of fusion-evaporation residues and if possible for heavy isotopes. Detailed simulations have been done for a good understanding to the ion’s movement and mechanics in the trap. The optimization of the LPT is also performed based on the simulation. With a scale of 0.5 mm per grid used in the simulation and many other limitations a highest mass resolution has been achieved to be 1.9×10-5. An unexpected behaviour in the simulation related to magnetron motion has been found.     

Realization of MMI Power Splitter by UV-light Imprinting Technique Using Hybrid Sol-Gel SiO2 Materials

An efficient fabrication scheme of buried ridge waveguide devices is demonstrated by UV-light imprinting technique using organic-inorganic hybrid sol-gel Zr-doped SiO2 materials. The refractive indices of a guiding layer and a cladding layer for the buried ridge waveguide structure are 1.537 and 1.492 measured at 1550nm, respectively. The tested results show more circular mode profiles due to existence of the cladding layer. A buried ridge single-mode waveguide operating at 1550 nm has a low propagation loss （0.088 dB/cm） and the 1× 2 MMI power splitter exhibits uniform outputs, with a very iow splitting loss of 0.029 dB at 1549nm.     

Quantum key distribution transmitter chip based on hybrid-integration of silica and lithium niobates

A quantum key distribution transmitter chip based on hybrid-integration of silica planar light-wave circuit (PLC) and lithium niobates (LN) modulator PLC is presented. The silica part consists of a tunable directional coupler and 400-ps delay line, and the LN part is made up of a Y-branch, with electro-optic modulators on both arms. The two parts are facet-coupled to form an asymmetric Mach-Zehnder interferometer. We successfully encode and decode four BB84 states at 156.25-MHz repetition rate. Fast phase-encoding of 0 or $\pi $ is achieved, with interference fringe visibilities 78.53% and 82.68% for states $|+\rangle$ and $|-\rangle$, respectively. With the aid of an extra off-chip LN intensity modulator, two time-bin states are prepared and the extinction ratios are 18.65 dB and 15.46 dB for states $|0\rangle$ and $|1\rangle$, respectively.     

2.5维圆波导开放边界截断的修正完全匹配层方法

 在时域有限差分算法中,完全匹配层是一种高效的吸收边界条件。通过在标准完全匹配层(PML)方程中添加具有物理意义的电导率和导磁率附加项,提出了修正完全匹配层(MPML)方法,给出了圆柱坐标下3维MPML方程,并应用于2.5维圆波导开放边界的截断计算。计算结果表明,在不同频率和模式的激励下,加入平滑电导率和导磁率附加项后,与标准PML方法相比,MPML方法的相对误差降低8~10 dB。     

高功率微波器件2.5维通用粒子模拟软件——尤普

利用体积加权宏粒子模型,考虑了阴极形状的爆炸电子发射模型、散度校正完全匹配层边界等新型和改进型电磁粒子模拟算法模型,提高了粒子模拟算法的计算精度,并有效降低数值噪声。在此基础上开发出2.5维全电磁通用粒子模拟软件——尤普,可在x-y,z-r和r-φ3种坐标系下应用于高功率微波器件的2.5维数值模拟研究和结构设计。对相对论磁控管、磁绝缘线振荡器和虚阴极振荡器等高功率微波器件的模拟结果表明：尤普软件得到了正确的物理图像和物理规律。     

用于放射性束流的RFQ冷却聚束器

简要概述RFQ冷却聚束器的基本原理, 并给出了利用SIMION程序模拟的部分结果. 设计中的RFQ冷却聚束器与国际上其它同类设备相比, 具有特征半径大、入射粒子的允许能量上限值高和氦气气压高的特点, 因此本文最后对需要克服的困难作了一个简要的阐述.