A Study of Multi-order Semidifferential Oscillographic Chronopotentiometry

ASemiintegralelectroanalysishasbeenimprovedanddevelopedsinceOldhamlwhofirstintroduceditinl972,andiswidelyaPpliedtoseveralkindsofpolarographicanalysis"'suchaslinearsweepvoltammetry,cyclicvoltammetryandanodicstrippingvoltanunetry.Anewfieldinelectroanalysis,neopolarographicmethod,isformed.Thismethodhasmanyadvantages,forexample,highsensitivity,goodresolvingpower,simPlicityofinstrUmentstructureandlowcost.Itissuitableforthestudyoffastanalysisandfastelectrodereaction.Determinationcanbecarriedouteve…     

微生物合成的β-羟基丁酸酯与β-羟基己酸酯共聚物/聚乳酸共混材料(PHBHHx/PLA)的力学性能与生物降解性研究

通过熔融共混法制备了聚乳酸/微生物产β-羟基丁酸酯与β-羟基己酸共聚物的共混物(PLA/PHBHHx)。采用拉伸力学试验研究了共混物的力学性能。通过土壤悬浊培养降解法和扫描电子显微镜(SEM)分析对共混材料的生物降解性能进行了研究。实验结果表明,随着PHBHHx含量的增加,共混物的拉伸强度和杨氏模量降低,而生物降解速率却显著提高。但是,在175h之前,重量组成比为20/80的共混物降解速率比纯PHBHHx还要快。综合分析表明,共混材料PLA/PHBHHx的重量比为20/80时,具有优良的力学性能和生物降解性。     

微型柱在线分离-ICP-MS法测定高纯氧化铕中的14个稀土杂质

研究了微型柱在线分离-电感耦合等离子质谱法（ICP-MS）测定高纯Eu2O3中痕量Tm的方法，研制了Cyanex272负载树脂微型分离柱，优化了分离Eu2O3基体的实验条件，在线分离测定时间为25min。建立了在线柱分离测定Tm，内标补偿法直接测定其余稀土杂质的高纯Eu2O3中14个稀土杂质的ICP-MS分析方法。方法检出限为0.01μg/g-0.15μg/g，加标回收率为91.5%-110%,相对标准偏差为1.7%-4.9%。可满足快速测定99.999%Eu2O3中14个稀土杂质的要求。     

倒数示波计时电位滴定新技术

倒数交流示波极谱具有抑制充电电流、突出电解电流的优点,利用(dE/dt)~(-1)-E曲线上去极剂峰的突然消失或出现指示滴定终点的方法称作倒数示波计时电位滴定法.由运算放大器组装的模拟电子线路可以对(dE/dt)~(-1)-E曲线进行反馈、反对数及微分处理,从而获得各种类型的倒数示波计时电位曲线(图1),以进一步提高滴定的灵敏度。     

MoS2纳米管包覆单壁碳纳米管束的制备

MoS₂ nanotube coated SWNT (Single wall carbon nanotube) bundles have been successfully prepared by adsorbing (NH₄)₂MoS₄ onto SWNT bundles and subsequent heat treatment under H₂ at 900 ℃ in a tube furnace. The morphologies, structure and composition of the as-prepared sample were investigated by XRD, SEM, HRTEM coupled with EDS. The formation mechanism has also been preliminarily discussed.     

四甲基锡在MCM-41分子筛表面的接枝反应及产物性能

研究了真空条件下SnMe4在MCM-41分子筛表面的接枝反应，并用元素分析、ICP、GC-MS、XRD、FTIR、DRS、13C及119Sn MAS NMR、XPS、BET、TPD、TPR等方法对产物的组成、结构和性质进行了表征.结果表明, 两者可以定量地进行化学反应，将确定数目的甲基锡基团接枝在分子筛表面, 形成SnMe3/MCM-41物种；接枝反应发生在分子筛表面上, 不破坏MCM-41分子筛骨架结构；改性分子筛的BET比表面积有所降低，孔体积变小, 表面性质发生变化.四甲基锡在MCM-41上接枝反应的温度为343 K,比它与HY沸石的反应温度(193 K)高得多，并且产物SnMe3/MCM-41的热稳定性也高于SnMe3/HY.     

Synthesis and Crystal Structure of Ag2（admtrz）2（CF3CO2）2（admtrz=4—amino—3,5—dimethyl—1,2,4—triazole）

1 INTRODUCTION Transition metal complexes bridged by 1, 2, 4-triazole group can produce interesting structures and specific properties[1]. Many attempts have been made to synthesize a variety of complexes with paramagnetic centers by using such ligands, and their structures and magnetic properties have been characterized[2]. However, the polynuclear Ag(I) complexes bridged by 1, 2, 4-triazole have been poorly studied[3]. Recently, we have prepared a series of silver(I) triazole complex…     

用极点方法识别水下目标

本文中研究一种水下目标识别方法并介绍一组材料、大小、厚度不同的中空圆柱形水下目标的识别实验。我们分三步提取水下目标特征量。第一步是在频域上用短脉冲作为入射信号辨识脉冲响应函数。第二步用“卷积-修正递推最小二乘”法估计目标ARMA模型参数。第三步计算频域上的极点。我们用极点作为水下目标的特征量,并认为它是一个不变量。计算机模拟结果表明,同以AR参数作为特征量的方法相比较,极点法的抗噪声干扰能力改善12dB。我们采用匹配滤波分类器对水下目标进行分类。实验结果表明,在无噪声情况下,正确识别率可达100％。信噪比 关键词：     

锂离子电池用多孔硅/石墨/碳复合负极材料的研究

在两步高能球磨和酸蚀条件下制得了多孔硅/石墨复合材料，并对其进行碳包覆制成多孔硅/石墨/碳复合材料。通过TEM，SEM等测试手段研究了多孔硅材料的结构。作为锂离子电池负极材料，电化学测试结果表明多孔硅/石墨/碳复合材料相比纳米硅/石墨/碳复合材料有更好的循环稳定性。同时，改变复合体配比、热解碳前驱物、粘结剂种类和用量也会对材料的电化学性能产生较大的影响。其中使用质量分数为10％的LA132粘结剂的电极200次循环以后充电容量保持在649.9 mAh·g^-1，几乎没有衰减。良好的电化学性能主要归因于主活性体-多孔硅颗粒中的纳米孔隙很好地抑制了嵌锂过程中自身的体积膨胀，而且亚微米石墨颗粒和碳的复合也减轻了电极材料的体积效应并改善了其导电性。     

Poly（meta-phenylene） Derivative with Rigid Twisted Biphenyl Units in Backbone： Synthesis, Structural Characterization, Photophysical Properties and Electroluminescence

A soluble poly(meta-phenylene)derivative with rigid twisted biphenyl unit was synthesized by the Yamamoto coupling reaction.The polymer is soluble in common organic solvents,and the number-average molecular weight is about 6500.The UV-Vis and quantum chemical calculation indicate that the different conformation segments named "conformers" exist in the polymer backbones;it was also further confirmed by the single crystal X-ray diffraction study of the dimeric model compound.The π-π transition of biphenyl segments of twisted and planar conformations made the polymer exhibit a strong absorption around 256 nm and a weak absorption at about 300 nm.Furthermore,the polymer exhibits a strong UV photoluminescence at 372 nm when the excitation wavelengths are longer than 300 nm.The ultraviolet-emitting electroluminescence(EL)device with the single layer structure shows EL λmax of the derivative at 370 nm.