聚碳硅烷的高温高压生成机理研究

分别以聚二甲基硅烷(PDMS)、液态聚硅烷(LPS)及PDMS裂解剩余物(LPCS)为原料,在不同的温度下高压合成聚碳硅烷(PCS),采用红外、紫外、核磁共振、分子量及其分布等分析PCS的组成、结构随温度的变化.同时,采用改变减压蒸馏温度的办法,对PCS进行分级,收集在不同蒸馏温度下的馏分,通过对一系列馏分进行了IR分析,以此推测PCS的转化过程.研究表明,PCS的生成过程是随着温度的升高,PDMS、LPS中键能较低的Si—Si键断裂,逐渐转变成为键能较高的Si—C键,转化为低分子的碳硅烷;随着温度的升高,碳硅烷分子间发生脱氢、脱甲烷缩合反应使产物的分子量逐渐长大,生成PCS.     

A New Anthraquinone from Clinopodium polycephalum Glyceroyl-1,6,8-trihydroxy-3-methyl-9,10-dioxo-2-anthracene Carboxylate

ClnOPodiumpoIycePhalum(VantjCYWhetHsuancalled'DuanXielin'inChineseisusedinfolkmedicineforthetreatInentofhaemorrhagiadisease.lInordertofmdtheactivecomPounds,studiesonthechedricalconstituentsofthewholeplan,collectedatHuoShanofAnhuiprovince,werecarriedout.Fromthealcoholicextracts,wehaveisolatedanewanthraquinone,Glyceroyl-l,6,8-trihydroxy-3-methyl-9)lO-dioxo-2-anthrcenecarboxylateI(Figurel).Iwasobtainedasredneedles,mP:ll9-l2l"C.TheHR-MSdareaffordedthefor-mulaasCl9Hl6O9(Found388.O791;…     

Molecular Simulation on Transport Properties of Confined Water

The diffusivity and viscosity of water confined in micropores were studied by molecular dynamics simulations. The effects of pore width and density were analyzed at pore widths from 0.9 to 2.6nm. The diffusivity in micropores is lower than that of the bulk, and it decreases as pore width decreases and as density increases. But the viscosity in micropores is much larger than that of the bulk, and it increases as pore width decreases and as density increases. The diffusivity in channel parallel direction is obviously larger than that in channel perpendicular directions.     

Effect of Alkali Treatment on the Structure and Catalytic Properties of ZSM-5 Zeolite

Catalytic properties of ZSM-5 zeolite samples pretreated with NaOH solution have been investigated. The samples are characterized by XRD, SEM, chemical analysis, and N2 adsorption.The results indicate that mesopores are created in ZSM-5 crystals under alkali treatment without change the microporous structure and acidic strength of the zeolite, but the crystallinity is greatly decreased under severe treatment. IR indicates that the concentration of silanol is greatly enriched by alkali treatment. The etherification activities of ZSM-5 zeolites are greatly increased byalkali-treatment. The noticeably improved catalytic activity of treated samples is ascribed to the formation of mesopores and greatly enriched silanol group.     

短波段光学减反膜的溶胶-凝胶法制备及性能分析

 随着大型激光器的发展，对短波段减反膜的要求日益提高，其中钕玻璃激光三倍频（355nm）的减反射成为新的技术要点。采用溶胶-凝胶工艺合成SiO₂溶胶，采用提拉镀膜法制备纳米多孔SiO₂薄膜，薄膜厚度为75nm，折射率控制在1.22，镀制在石英基底上的薄膜其355nm波长的反射率仅为0.2%。通过氨处理工艺和薄膜的表面修饰，薄膜的抗磨擦性能和疏水性能大大提高，薄膜经过蘸有灰尘、乙醇的棉花球擦洗20次和50次后，透射率最大值仅分别降低0.13% 和 0.39%，与水珠的接触角达到110°。     

Synthesis and Characterization of Titanium-doped Ordered Mesoporous Alumina

Titanium-doped ordered mesoporous alumina with specific structural properties has been prepared by the evaporation induced self-assembly sol-gel method. The results show that the doped titanium helps to stabilize the ordered mesoporous alumina material without influencing the ordered mesoporosity. The textural properties of the obtained sample are related to the amount of doped titanium. When the molar ratio of aluminum to titanium(n(Al)/n(Ti)) is controlled as 10.2, the titanium-doped ordered mesoporous alumina exhibits high surface area(up to 218 m2 g-1), large pore volume(0.42 cm3 g-1) and narrow pore diameter(6.1 nm) after treating at 900 ℃, showing high thermal stability. Moreover, the obtained sample calcined at 900 ℃ still maintains ordered mesoporous structure and exhibits high thermal stability.     

物理化学实验教学及实验室信息化管理体系的构建与实践

在"世界一流学科"的建设环境下,结合物理化学实验教学和实验室管理现状,利用云班课平台和二维码技术,从实验教学过程和实验室管理等2个方面构建了物理化学实验信息化管理体系,详细介绍了信息化管理体系的构建思路及实践研究.研究表明,物理化学实验教学和实验室进行信息化管理后,提高了教师的工作效率,提升了实验室的管理质量,激发了学生的学习兴趣,受到师生的普遍欢迎.     

片状LiV3O8软模板辅助溶胶-凝胶法制备及其在水系锂离子电池中的性能研究

负极材料是目前制约水溶液锂离子电池的关键.采用十二烷基苯磺酸钠软模板辅助的溶胶凝胶法制备了片状LiV3O8材料.XRD和SEM测试表明,目标材料为纯相的片状结构LiV3O8,属单斜晶系,P21/m点群.组装LiMn2O4//Li2SO4//LiV3O8水溶液锂离子电池,测试发现片状LiV3O8具有较高的倍率性能和较好的循环寿命.在0.1C下,LiV3O8的放电比容量为154 mAh·g-1.在1C、5C和10C时,放电容量分别为134 mAh·g-1、78 mAh·g-1和54 mAh·g-1.1C前170周循环的容量保持率约60%.     

改性阳离子交换树脂的制备、表征及催化合成双酚F

用浸渍法制备了改性阳离子交换树脂,通过红外光谱、热重分析和扫描电镜等对其进行了分析,探讨了不同改性树脂对以苯酚和甲醛为原料催化合成双酚F收率的影响。当等摩尔比Al Cl3和Ti Cl4加入总量为树脂质量的8%,反应温度为80℃,改性时间为10h,Al Cl3-Ti Cl4改性阳离子交换树脂催化合成双酚F,其收率高达90.02%,比未改性或Al Cl3单独改性树脂的催化效果都好,其重复利用率也优于后两者。结果说明,Al Cl3-Ti Cl4改性阳离子交换树脂催化性能好,是一种环境友好高效合成双酚F的催化剂。     

Magnetization switching modes in nanopillar spin valve under the external field

The current-induced magnetic switching is studied in Co/Cu/Co nanopillar with an in-plane magnetization traversed under the perpendicular-to-plane external field.Magnetization switching is found to take place when the current density exceeds a threshold.By analyzing precessional trajectories,evolutions of domain walls and magnetization switching times under the perpendicular magnetic field,there are two different magnetization switching modes:nucleation and domain wall motion reversal;uniform magnetization ...