汽包锅炉炉内局部结渣实时诊断研究

研究了汽包锅炉炉膛内局部结渣的故障诊断问题.选取膜式水冷壁背火侧三个温度点──鳍端温度、鳍根温度和管外壁中点温度──作为炉内局部结渣故障特征参数,使用灰渣层热阻反映炉内水冷壁局部结渣程度,运用径向基函数网络建立起描述故障特征参数和局部结渣程度之间高度非线性映射关系的故障诊断模型.实例分析表明:该方法诊断结果准确,无需布置昂贵的热流计,是一种有效的诊断炉内局部结渣的故障诊断方法.     

基于6S模型的遥感影像逐像元大气纠正算法

大气纠正的目的是从遥感影像中去除大气影响,并反演获取地物真实反射率。介绍了一种逐像元对遥感影像进行大气纠正的算法,该算法基于6S(Second Simulation of the Satellite Signal in the Solar Spectrum)大气辐射传输模型计算建立的查找表(look-up table),并利用地面暗目标(dark object)进行陆地气溶胶光学厚度的自动反演,由于气溶胶的分布具有空间连续性,在获取地面暗目标气溶胶光学厚度值后,通过空间插值的方法计算影像中非暗目标像元的气溶胶光学厚度值,经过查找表二次插值计算,逐像元进行大气纠正并获取像元地表反射率值。以Landsat5遥感影像为例,介绍了算法流程,展示了大气纠正的结果。结果显示,利用查找表逐像元大气纠正的算法,能够在一定程度上去除云雾对影像的影响,更加精确的对遥感影像进行大气纠正并获取地物的真实反射率。     

煤粉燃烧过程中相转变点的小波识别

相变点的识别对研究煤粉的低温共熔和结焦有重要意义.本文分别对活性炭和加入SiO2的活性炭混合物的DSC曲线求导得到的DDSC曲线进行小波分析,提取DDSC曲线的近似部分和细节部分,得到更多关于相变的定量信息,再结合其TG,DTG曲线进行分析,实现对以上两种样品燃烧过程中相变点的识别;并将该方法运用到煤粉燃烧过程的相变分析中,对相变点后的烧结形态的场发射扫描电镜分析结果表明该方法是可行的.     

M+AsF6-(M=Li,Na,K,Rb和Cs)离子对的结构和振动光谱

利用abinitio计算方法研究了AsF6-阴离子和M AsF6-(M =Li ,Na ,K ,Rb 和Cs )直接接触离子对的结构和光谱行为。结果表明,具有C3V结构三齿相互作用的M AsF6-最稳定,二齿配位的结构只有在特定条件下才可能稳定存在。当形成离子对后,阳离子与AsF6-的相互作用将改变AsF6-的结构,这其中Li 的影响最大。另外,AsF6-光谱的变化可用来指认溶液中离子的缔合和离子对的种类。     

Multi-mode Spiral Wave in a Coupled Oscillatory Medium

Multi-mode spiral wave and its breakup in 1-d and 2-d coupled oscillatory media is studied here by theoretic analysis and numerical simulations. The analysis in 1-d system shows that the dispersion relation curve could be nonmonotonic depending on the coupling strength. It may also lead to the coexistence of different wave numbers within one system. Direct numerical observations in 1-d and 2-d systems conform to the prediction of dispersion relation analysis. Our findings indicate that the wave grouping can also be observed in oscillatory media without tip meandering and waves with negative group velocity can occur without inhomogeneity.     

Preparation and Humidity Sensing Properties of KCl/MCM-41 Composite

KCl/mobil composition of matter-41 （MCM-41） composite has been synthesized via a heat-treating process and characterized by x-ray diffraction, high resolution transmission electron microscopy, and nitrogen adsorption/desorption isotherms. In contrast with pure MCM-41, KCl/MCM-41 composite exhibits improved humidity sensing properties within the relative humidity range of 11-95%. The impedance of KCl/MCM-41 composite changes by about four orders of magnitude over the whole humidity range with the response time and the recovery times are about 30s and 35s, respectively. Small humidity hysteresis and good stability are also observed based on our product. These results make our product a good candidate in fabricating humidity sensors with high performances and low synthetic complexity.     

油酰柠檬酸三乙酯的合成及红外光谱研究

以柠檬酸和乙醇为原料,在磷酸和苯磺酸混合催化剂作用下,加热回流,酯化生成柠檬酸三乙酯。以油酸与氯化亚砜为原料,通过酰化反应合成油酰氯。再使柠檬酸三乙酯与油酰氯在吡啶作用下,通过酰基化反应合成油酰柠檬酸三乙酯。采用红外光谱法对原料、中间体、产物进行了红外光谱测试,并进行了红外谱图的分析与比较,证明了各步产品为目的产物。根据原料、中间体、产物红外谱图中相应特征吸收峰的消失或是出现,证明了所选择的合成工艺路线是可行的。     

塞曼激光陀螺磁屏蔽设计与实现

为提高塞曼激光陀螺精度,分析了塞曼激光陀螺磁的磁敏感特性,指出敏感轴方向是塞曼激光陀螺的最大磁灵敏度方向,该方向为产生磁误差的主要方向。研究了低频磁场屏蔽理论与加工工艺关键技术,结合激光陀螺的环境适应性要求,实现了固态激光陀螺磁屏蔽结构。在三轴磁试验台上进行了陀螺磁敏感性测试,陀螺磁灵敏度值减少到原来的1/1000,实测系数达到2.0(°)/(h.mT),该值满足中等精度激光陀螺的实用要求。     

非共轴激光雷达几何因子分析与测量

介绍了非共轴激光雷达几何因子的物理意义,分别通过理论分析和试验测量给出了求解几何因子的方法。结合自行研制的CSY-1便携式能见度激光雷达,将两种方法得到的几何因子进行对比,讨论了系统参数对几何因子的影响,从而实现了对激光雷达系统优化设计的可能性。     

Effect of deuteron density distribution on the deduction of screening potential from the D(d,p)T reaction in Be metals

The D(d,p)T reaction in Be metal environments has been measured to investigate the electron screening effect in metals in an energy region of from 5.5 keV to 10 keV in a center of mass system(CMS)at a temperature of 121 K.The depth distribution of deuteron density in Be metals has an impact on the observed reaction yields.A model of deuteron density distribution in metal has been proposed to obtain the original yields.A screening energy of(116±46)eV has been obtained with the assumed deuteron density distribution model.