基于EPL的分布式时钟同步方法

工业以太网协议Ethernet POWERLINK(EPL)分布式站点的时钟同步方法并不能在实时运行过程中保持很高的同步精度,无法满足特定环境下的控制要求。研究了工业以太网协议EPL的两种时钟同步机制,通过数理计算分析了时钟同步误差产生的原因,针对误差较大的缺点,提出了减小误差的方法。通过迭代计算消除了主从站同步报文往返的路径延迟,并设计基于现场可编程门阵列(FPGA)的集线器(Hub)用于EPL菊花链网络拓扑结构,有效地克服了时钟同步报文往返传输延时不一致的缺点,测试结果表明新方法明显优于协议自身的时钟同步方法,对于实现基于EPL的高精度分布式时钟同步网络具有重要意义。     

基于石墨烯的光纤湿度传感研究

将还原氧化石墨烯(r GO)沉积在侧边抛磨光纤(SPF)上制作了一种新型的光纤湿度传感器。在高湿度区域[相对温度(RH)为70%~95%],传感器的光功率变化达到6.9 d B,尤其在RH为75%~95%区域,传感器对湿度变化能实现相关系数为98.2%的线性响应,灵敏度可达0.31 d B/(%RH),响应速度快于0.13(%RH)/s,并且具有很好的可重复性。对传感机理的理论分析可以解释实验结果,并且表明这种基于石墨烯的光纤传感器亦可广泛应用于其他种类化学气体的探测。这种全新机理的光学传感器是对石墨烯电化学传感器的一种很好的补充,并将促进石墨烯在化学传感技术中的应用。     

Water‐Soluble Monolayer Molybdenum Disulfide Quantum Dots with Upconversion Fluorescence

Uniform water‐soluble monolayer MoS₂ quantum dots (MQDs) with lateral sizes of ≈2.1 nm, a clearly zigzag‐terminated edge, and a hexagonal lattice structure are achieved using ammonium molybdate, thiourea, and N‐acetyl‐l ‐cysteine (NAC) as precursors and the capping reagent in a facile one‐pot hydrothermal approach. MQDs have good dispersity and high stability in aqueous suspension and exhibit a significantly larger direct bandgap (3.96 eV) compared to monolayer MoS₂ nanosheets (1.89 eV). Pronounced blue‐shifts in the wavelengths of both the excitonic absorption and intrinsic state emission with activated strong luminescence at room temperature beyond monolayer MoS₂ nanosheets is demonstrated. Unusual upconversion photoluminescence is also observed and is caused by two successive transfers of energy from the near‐infrared (NIR) absorption generated by the NAC capping reagent to the hexagonal structure of MQDs. Additional optical properties of MQDs may provide numerous exciting technological applications. Here, MQDs are demonstrated as a highly selective fluorescent reagent for detecting tetracycline hydrochloride under UV and NIR irradiation.     

Facile and surfactant-free synthesis of SnO<Subscript>2</Subscript>-graphene hybrids as high performance anode for lithium-ion batteries

A facile microwave-assisted ethylene glycol method is developed to synthesize the SnO₂ nanoparticles dispersed on or encapsulated in reduced graphene oxide (SnO₂-rGO) hybrids. The morphology, structure, and composition of SnO₂-rGO are investigated by scanning electron microscopy, transmission electron microscope, thermo-gravimetric analyzer, X-ray diffraction, Raman spectroscopy, and X-ray photoelectron spectroscopy. The electrochemical performance of SnO₂-rGO as anode materials for lithium-ion batteries was tested by cyclic voltammetry, galvanostatic charge–discharge cycling, and rate capability test. It is found that the SnO₂ nanoparticles with a uniform distribution have p-type doping effect with rGO nanosheets. The as-prepared SnO₂-rGO hybrids exhibit remarkable lithium storage capacity and cycling stability, and the possible mechanism involved is also discussed. Their capacity is 1222 mAhg^?1 in the first cycle and maintains at 700 mAhg^?1 after 100 cycles. This good performance can be mainly attributed to the unique nanostructure, good structure stability, more space for volume expansion of SnO₂, and mass transfer of Li⁺ during cycling.     

300 W侧面分布式抽运掺Yb全光纤放大器

采用角度磨抛的方式, 在纤芯/包层为20/400 μm双包层掺Yb光纤上制作了侧面抽运耦合器. 该耦合器对975 nm的半导体二极管抽运光的耦合效率最高可达97%, 对1080 nm信号光的泄漏比小于2%. 分析了侧面抽运耦合器的性能以及多个侧面抽运耦合器的级联分布对抽运耦合效率的影响; 同时, 在前向抽运和双向抽运方式下, 分析了级联耦合器的分布及信号光泄漏比对激光器整体效率的影响, 并进行了数值模拟. 采用自行研制的侧面抽运耦合器, 搭建了侧面耦合分布式抽运、掺Yb双包层全光纤主振荡功率放大器, 获得了波长为1080 nm、功率为303 W 的基模激光输出. 进一步增加抽运点个数, 提高抽运功率, 可获得更高的输出功率.     

悬链曲面上的点粒子动力学及扩展空间约束系统量子化

扩张型正则量子化方案的核心内容是位置、动量以及哈密顿量同时量子化. 通过分析悬链面上粒子的扩张型正则量子化方案, 并且与薛定谔理论进行比较, 发现内禀几何中二维悬链面给不出与薛定谔理论相一致的结果, 而考虑将二维悬链面嵌入在三维欧氏空间之后, 还需要将正则量子化方案进行扩张, 可以得到体系的几何势能和几何动量, 并与薛定谔理论相一致.     

用序列二次规划法设计ICF 靶区光路

 运用序列二次规划法设计了靶区光路。由ICF 柱面靶间接驱动实验对多路激光束排布的要求, 建立靶区数学模型, 用本文设计结果构筑光路排布线框实体。该三维线框以特征线代表60路激光驱动光束实体, 以特征线段的转折点代表240面反射镜的空间位置。     

炸药爆轰产物驱动刚塑性球壳的加速运动

 从质量和动量守恒关系出发，导出了不可压缩刚塑性球壳在球面散心和聚心爆轰作用下的运动方程。应用本文结果计算球壳的加速运动与实验结果及动力有限元程序DYNA的数值摸拟结果吻合。     

自动实时激光全息无损检测系统

介绍一种自动激光全息无损检测系统。该系统由计算机控制自动曝光，并对全息干版进行自动冲洗和对测量数据进行处理，解决了一次曝光激光全息实时检测中全息干版无法精确复位的问题。计算机控制真空加载，缺陷大小及位置由计算机打印输出，一次最大测量面积为０５ｍ×１２ｍ，最小分辨缺陷尺寸为３ｍｍ。     

相移测量技术中相移器研究

本文介绍一种用于相移测量技术的相移器。该相移器由计算机通过Ｄ／Ａ接口板自动控制输出电压幅度，其电路采用闭环控制，位移由压电晶体产生，具有很高的电压稳定度（０１％）和较小的相移误差（小于３°）。描述相移器的结构、驱动源工作原理及相移器标定方法