Two Kinds of Cavity Geometry for Enhanced Laser Cooling of Solids

We present a comparison between intracavity cooling and external cavity cooling for optical refrigeration. The results show that the intracavity scheme is preferred at low optical densities （〈 0.008）, while the external cavity scheme is preferred at higher optical densities （〉 0.01）. We can choose the proper scheme for different eases in experiments. Moreover, under the same conditions, taking Yb^3＋-doped ZBLAN （ZrF4-BaF2-LaF3-AlFa-NaF） film as an example, the cooling processes of the two scheme are obtained. The calculated results show that intracavity cooling will achieve a larger temperature drop for a thin film sample. Finally, the diode laser may become a candidate for the intraeavity model briefly discussed.     

Analysis theory of random energy of train derailment in wind

Based on the analysis theory of random energy of train derailment, an analysis theory of random energy of train derailment in wind is suggested. Two methods are proposed -the time domain method and the frequency domain method of analysis theory of random energy of train derailment in wind. The curves of σ pw -v under various wind speeds are obtained through the computation. The original curve of σ p -v is expanded, which turns the analysis theory of random energy of train derailment into the all-weather theory. Train derailment condition has been established under wind action. The first and second criterions of train derailment have been proposed in light of wind action. The analysis of train derailment cases at home or abroad is made, in- cluding the first analysis of Xinjiang train derailment case encountered 13-level of gale, which explained the inevitability of train derailment. The analysis theory of random energy of train derailment in wind shows its validity and accuracy. The input energy σ pw of the transverse vibration of train-track(bridge)-wind system is linked to train speed. With the establishment of the analysis theory of random energy of train derailment in wind, It is likely to initiate an all-weather speed limit map for a train or any high-speed train.     

Co-occurrence of Dominant Direct and Indirect Transitions in Low Temperature Sputtered Indium Tin Oxide Thin Films on Polymers

Indium tin oxide （ITO） layers are prepared on polymethylmethacrylate and polyethylene terephthalate by rf- magnetron sputtering at room temperature. Their 3D-AFM images and visible transmittance spectra are contrastively characterized and studied. An interesting morphological effect of the polymer substrates on their top ITO layers is observed. Dominant direct and indirect transition types deduced from optical spectra are surprisingly found in ITO films on different polymers. Furthermore, qualitative band structures are figured, and some theoretical discussions about the correlation of optical band structure, interface/surface morphology and carrier density are also presented.     

室温下低温背景红外场景生成方法实验研究

针对高空红外场景模拟的需要,提出了模拟低温背景红外场景的新物理概念和半实物仿真实验装置.将锗单晶制作的初始透明的半导体屏放置于低温系统前端,通过控制其小于禁带宽度的局部辐射系数,在室温下(≥27℃)得到低温背景(≥-30℃)的红外场景.对液氮槽和半导体致冷器生成的冷背景的效果、辐射功率差随写入光功率的变化及低温背景和目标的温度对比度进行了实验测试.实验结果表明,液氮生成的冷背景可达-30℃,半导体致冷器为3℃;在一定范围内增大写入光的功率可以提高半导体屏的转换效率,写入光功率过高会造成辐射功率值的饱和;随着写入光功率的增加,温度对比度也大幅升高.     

Coloured Conical Emission in BBO Crystal Pumped by Second Harmonic Femtosecond Pulses

Coloured conical emission （CCE） is investigated experimentally in a β-barium borate crystal excited by intense second harmonic femtosecond pulses. Contrary sequences of green and red conical emission with variable diameters are observed at different incidence angles, which is consistent with the calculation results based on the phase matching condition. As its broad range spectrum, CCE offers an alternative means to produce an ultrafast broadband light source. It is found that the spectrum of green CE shifts toward longer wavelengths as the length of BBO crystal increased.     

Performance of Organic Field Effect Transistors with Self-Improved Cu/Organic Interfaces

We fabricate pentacene-based organic field effect transistors （OFETs） with Cu as source and drain （S-D） electrodes. The fabricated devices stored for ten hours under ambient atmospheric conditions exhibit superior performance compared with the as-prepared devices. The field-effect mobility increases from 0. 012 to 0.03 cm^2 V^-1 s^-1, and the threshold voltage downshifts from -14 to -9 V. The on/off current ratios are close to the order of 10^4. The improved performance of the stored devices is attributed to the formation of thin Cu oxide at the Cu electrodes/organic interfaces. These results suggest a simple and available way to optimize device properties and to reduce fabrication cost for OFETs.     

Study of Squeezed Excitons in Polar Semiconductors

Some properties of excitons in polar semiconductors are studied theoretically by means of squeezed state variational approach. This method makes it possible to consider bilinear terms of the phonon operators as well as linear terms arising from the Lee-Low-Pines (LLP)-like transformation. The exciton ground state energy andbinding energy are calculated numerically. It is shown that the squeezing effect is significant in the case of strong exciton-phonon coupling region.     

磁场中束缚极化子的有效质量

研究磁场中束缚极化子有效质量的性质,采用改进的线性组合算符和变分法讨论了磁场中强、弱耦合极化子的振动频率和有效质量与磁场B和库仑势的关系。以RbCl晶体为例进行了数值计算,结果表明:强耦合束缚磁极化子的振动频率λ和有效质量m^*随磁场B的增加而增大。弱耦合磁极化子的振动频率λ也随磁场的增加而增加,并且发现由于库仑势的存在,使得强耦合束缚磁极化子的振动频率λ和有效质量m^*有所增大。弱耦合磁极化子的有效质量仅和耦合强度α有关。     

热重-红外联用分析塑料垃圾热动力学特性对多环芳烃生成的影响

本文采用热重-红外联用观察了由PE,PVC,PS等组成的混合塑料和单独的塑料组分的热动力学特性和热重逸出产物的分布特性。结果显示,在混合燃烧和热解时多环芳烃的排放特性和其各组份单独燃烧时的排放特性明显不同,这主要是由于混合燃烧和热解时各塑料组分因相互作用而引起热动力学性质发生了变化所致。     

纳米颗粒团聚物流化特性的数值研究

基于气固两相流体动力学理论,建立气体纳米颗粒团聚物两相流动双流体模型.模型中采用了Jung ＆ Gidaspow (2002)测量的固相应力模量和王垚等(2001)提出的聚团曳力系数计算模型.对纳米颗粒团聚物的流化过程进行了数值模拟,得到纳米颗粒团聚物的流化特性.模拟得出的床层膨胀比与文献中实验的结果较为接近.