微型燃气轮机回热器换热表面的对比研究

采用高效紧凑式换热器是近年来微型燃气轮机发展取得成功的关键技术之一。本文在燃机参数给定情况下,通 过对三种换热表面进行热力计算和分析,结果表明,CC原表面在紧凑式换热器中具有较强的应用潜力。此外,还就温差 对压损的影响及燃气旁通量对回热度的影响进行了研究。     

系综分布和它的小涨落近似

由“从正则分布出发，在小涨落近似下得出的能量涨落分布公式”求得的能量涨落的二次矩与直接由正则分布求得的二次矩完全相同，但分别由二求得的高次矩并不完全相同。     

闭排队网络中性能势与无穷小实现因子之间的关系

In this paper,the concept of the infinitesimal realization factor is extended to the parameter-dependent performance functions in closed queueing networks. Then the concepts of realization matrix (its elements are called realization factors) and performance potential are introduced,and the relations between infinitesimal realization factors and these two quantities are discussed. This provides a united framework for both IPA and non IPA approaches. Finally,another physical meaning of the service rate is given.     

一类广义Liénard系统解的有界性

研究了一类广义 Liénard系统dxdt=p(y) -F(x) ,　 dydt=-g(x) (E)解的有界性 .首先获得了系统 (E)存在无界解的两个新的充分条件 ,然后获得系统 (E)所有解正向有界的若干充分条件和充要条件 ,所获结果改进和扩展了文 [1 -2 ]中的相应结果 .     

Modeling of RF plasma torch with a metallic tube inserted for reactant injection

Flow, temperature, and electromagnetic (EM) fields in a radio-frequency thermal plasma torch designed for the preparation of superconducting powders or films have been analysed by using a new two-dimensional modeling approach with the electric field intensity as the fundamental EM field variable. The insertion of a stainless steel injection tube into the torch leads to large induction currents in this tube. Although such large induction currents cause pronounced changes of the EM fields near the injection tube, flow and temperature fields are little affected. There exists only one large toroidal vortex in the upper part of the present torch, while the maximum temperature appears at an off-axis location within the coil region.     

Physico-Chemical Characterization of Yu Guo Beads(1100-771 B. C. ) in China

When was the earliest glass produced in China? This has still been a question so far. Some archaeologists have thought that Yu Guo beads are real glass, the earliest glass(1100-771 B. C. ) in China. However, more details of scientific investigations in this paper show that Yu Guo beads are mainly made of clastic quartz (>95%) with a small amount of clay and sintered under the low temperature(500-600℃). It is not a glassy body, but a kind of polycrystal ornaments.     

电子直线加速器磁控管频率稳定的自适应线性神经元方法

 电子直线加速器电子束能量的稳定与否取决于功率源工作频率的稳定性,磁控管在短时间内的散谱和轻微跳谱造成稳频系统的控制精度下降,最后电子束的扫描均匀度下降。引入自适应线性神经元方法(ADALINE)和噪声对消技术以消除对工作频率长期稳定性的影响,从而保证了电子束的扫描均匀度。     

斜孔气膜冷却数值模拟分析

本文通过数值模拟分析圆柱孔和扩散孔的单斜孔气膜冷却特性,考察复合角、孔型和吹风比对流场和气膜冷却效果的影响。结果表明,复合角的引入使气膜侧向分布更宽,但冷却效果沿主流方向衰减更快。适中吹风比得到的气膜能更有效的保护壁面。在相同吹风比和复合角条件下,扩散孔的气膜冷却效率比圆柱孔更好,且冷却更为均匀持久。     

石墨-六角氮化硼微晶混合物与水高压反应产物分析

 利用球磨法制备石墨-六角氮化硼微晶混合物，并在6.1 GPa、800~1 500 ℃条件下与水进行高压反应，以便研究用水作触媒合成B-C-N三元化合物的可能性。通过对反应产物的XRD、XPS谱分析发现：高压下随着温度的升高，反应产物中出现再结晶石墨，其晶化程度逐渐提高；但没有出现再结晶六角氮化硼，也未出现立方氮化硼。在球磨不充分条件下，石墨-六角氮化硼混合物的XRD谱没有完全弥散，它们与水高压反应时，能观察到石墨与立方氮化硼分别结晶的现象，但都没有形成B-C-N晶化结构。     

SILEX-1装置上等离子体尾场加速电子初步实验

激光等离子体加速电子机制可以产生准单能的高能电子束, 近年来成为国际上的研究热点. 中国工程物理研究院激光装置已经能够达到286TW的输出功率, 为国内在该领域的研究提供了实验条件. 文章介绍了在SILEX-1装置上开展的激光等离子体加速电子的初步实验, 并对测得结果进行讨论, 为下一步实验的进行提供了准备条件.