BEPCⅡ高频发射机和环流器的调整和测试

北京正负电子对撞机升级改造工程(BEPCⅡ)将采用的频率500MHz、输出功率250kW的高频发射机和环流器已安装、调整、测试和验收完毕,这是国内建立的第一套500MHz/250kW发射机系统.本文将详细介绍机器的调测试的原理和各项测量内容及结果, 并比较设计指标和要求,来阐述此发射机的实际技术指标和测试性能.     

SD对壳模型: 偶偶Pt核低激发态性质

利用SD对壳模型讨论了偶偶Pt核低激发态的集体性质. 结果发现在该模型下, 利用一个仅含有3个参数的哈密顿量, 可以很好地再现偶偶Pt核低激发谱的集体性质.     

ICP-MS测定动物肝脏中铅、镉和砷

利用电感耦合等离子体-质谱法(ICP-MS)同时测定动物肝脏中铅、镉、砷3种元素.样品经聚四氟乙烯高压消化罐消解后,以锗、铟、铋作为内标物质,补偿基体效应,直接用ICP-MS同时测定这3种元素,结果令人满意.该法线性范围宽,分析速度快,准确度和精密度均符合分析测试要求.     

Evolution of Bond-Order-Wave Phase in One-Dimensional Mott Insulators

In this paper, by using the level spectroscopy method and bosonization theory, we discuss the evolution of the bond-order-wave （BOW） phase in a one-dimensional half-filled extended Hubbard model wlth the on-site Coulomb repulsion U as well as the inter-site Coulomb repulsion V and antiferromagnetic exchange J. After clarifying the generic phase diagrams in three limiting cases with one of the parameters being fixed at zero individually, we find that the BOW phase in the U-V phase diagram is initially enlarged as J increases from zero but is eventually suppressed as J increases further in the strong-coupling regime. A three-dimensional phase diagram is suggested where the BOW phase exists in an extended region separated from the spin-density-wave and charge-density-wave phases.     

~(147)Pm激发的ZnS∶Cu,Cl发光粉的研究

以高纯ZnS粉末为基质,采用高温转相、扩散,以及表面涂敷工艺,制得了147Pm激发的ZnS∶Cu,Cl发光粉。分析了ZnS∶Cu,Cl的晶体结构,测量了ZnS∶Cu,Cl的激发光谱、发射光谱、发光亮度。其晶体结构主要是六方纤锌矿型结构,激发光谱峰值波长为341nm,发射光谱峰值波长为513nm,初始发光亮度达到312mcd/m2。由激发光谱的峰值波长341nm推算得到六方ZnS晶体的禁带宽度为3.64eV。分析了147Pm激发的ZnS∶Cu,Cl发光粉的发光寿命,其发光寿命达到5年以上。还探讨了该放射性发光粉的发光机理。147Pm激发的ZnS∶Cu,Cl的稳定发光,实际上是激发过程与复合过程的准平衡。ZnS∶Cu,Cl的绿色发光来源于深施主-深受主对的复合发射。实验结果的分析表明,ZnS∶Cu,Cl中深施主-深受主之间的能级间隔约为2.42eV。     

Investigation of Impurity Ion Transport with Laser Blow-off in HL-2A Tokamak

Non-recycling impurities are injected into ohmic HL-2A plasma for the first time. The impurities of titanium and aluminium are injected in the discharges with varying plasma density and current. The convection and diffusion process of the injected impurity ions during the inward phase are qualitatively investigated. The results show that the transport of impurities is much slower in the central region of the plasma than outside of it and that it is greatly enhanced during sawtooth crashes.     

In Situ Observation of Skeletal Shape Transition during BaB2O4 Crystal Growth in High-Temperature Solution

The transition from a fiat solid-liquid interface to a skeletal shape during BaB2O4 （BBO） single crystal growth in Li2B4O7 flux is observed in real time by an optical high-temperature in-situ observation system. The movement of crystal step is also investigated. The observation results demonstrate that the steps propagate along and parallel to the fiat interface when the crystal size is small. Nevertheless, they will ‘bend＇ close to the face centre if the crystal size becomes greater. Atomic force microscopy reveals that more deposition places near the face centre give rise to the bending of advancing steps and thus the formation of a vicinal interface structure. Measurements of step velocity show that the velocity keeps nearly constant at different moments for one specific step, whereas the step on a newly formed layer advanced faster than that on a previously formed one when the crystal size is larger than 210μm or so. Thus interracial morphological instability occurs and a skeletal interface is obtained.     

白光LED用Ba3La（PO4）3∶Dy3+荧光粉的制备与发光性能

通过高温固相法合成了一系列Ba3La1-x(PO4)3∶xDy3+荧光粉材料。利用XRD测量样品的物相,结果显示样品为纯相Ba3La(PO4)3晶体。样品的激发光谱由一系列宽谱组成,峰值分别位于322,347,360,386,424,451 nm。在347 nm激发下,荧光粉在482 nm(4F9/2→6H15/2)和575 nm(4F9/2→6H13/2)处有很强的发射。研究了不同Dy3+掺杂浓度对样品发射光谱的影响,当Dy3+摩尔分数x=0.10时出现猝灭现象,浓度猝灭机理为电偶极-电偶极相互作用。确定了不同Dy3+掺杂浓度的Ba3La(PO4)3∶Dy3+的荧光寿命。Ba3La(PO4)3∶Dy3+荧光粉发射光谱的色坐标位于白光区域。     

介质阻挡放电中点线放电的谱线线型及振动温度

在氩气/空气的混合气体近大气压介质阻挡放电中,首次观察到点状与线状放电共存的放电现象, 测量比较了点状与线状放电的谱线频移和振动温度。谱线频移的测量利用的是氩原子ArⅠ(2P₂→1S₅)的发射谱线,振动温度的测量利用的是氮分子第二正带系(C3Π_u→B3Π_g) 的发射谱线。结果表明：点放电中的ArⅠ(2P₂→1S₅)谱线的频移大于线放电谱线的频移,表明前者电子密度较高;而点放电振动温度低于线放电的振动温度。     

真空环境熔融金属成分检测的激光诱导击穿光谱系统

激光诱导击穿光谱(LIBS)技术是应用于冶金在线分析最具前景的技术之一。为了研究真空和高温条件下LIBS光谱特性和物质成分定量分析方法,设计并搭建了可实现真空环境高温熔融金属LIBS光谱测量的实验系统。系统以调Q Nd: YAG脉冲激光器为光源,采用不同焦距透镜实现激光聚焦和信号光采集,并利用光谱仪进行光谱检测,真空获取和高温加热通过真空泵和中频感应电炉实现,感应加热线圈通过陶瓷封接引线法兰与真空系统进行整合。经过安装测试,搭建系统在未加热情况下真空度可达1×10-4Pa,加热温度可达到1 600 ℃,可实现真空环境下铁、铝等金属加热或熔融,并获得相应环境下的LIBS测量光谱。利用该系统进行真空和熔融条件下标准钢样品的LIBS实验,得到了固态钢样品LIBS光谱在不同真空度下的光谱对比,以及真空环境熔融态和固态钢样品光谱对比。通过对测得的LIBS光谱进行数据处理和理论分析,所得初步实验结果与现有研究结论相符合,表明该系统工作状况良好,可满足真空环境下的熔融金属成分分析研究的基本需求。