Selection of Anodic Material Used in Electrolytic Process for Producing Hypophosphorous Acid

Black lead, Ti-Ru and Ti-PbO2 were used as anode and stainless steel was used as cathode The electrolytic process of producing hypophosphorous acid with four-compartment electrodialytic cell was studied. The comparison of some factors, such as anodic voltage, product concentration and current efficiency, of black lead, Ti-Ru, and Ti-PbO2 electrodes was conducted. As a result, theTi-PbO2 electrode is the optimal anode material used, it can be in electrolytic process for producing hypophosphorous acid.     

Prototype of immunochromatographic assay strips using colloidal CdTe nanocrystals as biological luminescent label

Colloidal semiconductor nanocrystals have attracted considerable attention as a novel biological luminescent label. The bioinorganic conjugates of luminescent CdTe nanocrystals and protein, including CdTe/BSA (bovine serum albumin) and CdTe/MAB (mouse monoclonal antibody against hepatities B surface antigen), were formed via electrostatic/coordination self-assembly. Pure CdTe nanocrystals, CdTe/BSA and CdTe/MAB were used in the immunochromatographic assay experiments, respectively. And the results indicated that CdTe nanocrystals could be used and developed as a novel label with good stability, high sensitivity and facile determination of several analytes in immunochromatographic assay strips.     

Construction and Analysis of N-phosphoryl Peptide Libraries

N-Phosphoryl peptide libraries were constructed by transformation from homo-oligopeptide libraries, which was synthesized by self-assembly of amino acids with the assistance of phosphorus oxychloride. Electrospray ionization mass spectrometry (ESI-MS) was used to monitor the reaction.     

Promotion of Ionic Liquid to Dimethyl Carbonate Synthesis from Methanol and Carbcn Dioxide

Promotion of ionic liquid, 1-ethyl-3-methylimidazolium bromide (emimBr), to the synthesis of dimethyl carbonate (DMC) from methanol and carbon dioxide in the presence of potassium carbonate and less amount of methyl iodide under mild conditions was investigated. The results showed that the high selectivity and raised yield of DMC was achieved due to the addition of emimBr in the reaction system. And effect of several reaction conditions such as temperature, pressure and amount of emimBr was discussed.     

咪唑-金属配合物的合成、性质及其与DNA的作用机理

Three hexakis（imidazole）metallo complexes of Co, Cd and Ni were synthesized and spectroscopically characterized. The crystal and molecular structures have been determined by X-ray crystallography analysis. The metal ions have an octahedral geometry with the MN6 chromophore. The electrochemical experimental results indicate that both [Co（Im）6]C12·2HCl·2H2O （1） and [Ni（Im）6]C12·4H2O （3） [Im=imidazole] could interact with DNA mainly by intercalation.     

Structure and properties of (1−x)(0.6Pb(Zn1/3Nb2/3)O3-0.4Pb (Mg1/3Nb2/3)O3)-xPbTiO3 thin films with perovskite phase promoted by polyethylene glycol

The preferential formation of a pyrochlore structure is a knotty problem in the preparation of Pb(Zn_1/3Nb_2/3)O₃ (PZN)-based thin film materials and its presence is significantly detrimental to the dielectric and piezoelectric properties. In this study, 40 mol% of PZN was replaced with Pb(Mg_1/3Nb_2/3)O₃ (PMN) for obtaining a perovskite composition around a morphotropic phase boundary (MPB), (1−x)(0.6PZN-0.4PMN)-xPT ((1−x)PZMN-xPT, PT: PbTiO₃) where x = 0.23. The thin films with this composition were prepared with a polyethylene glycol (PEG) modi-fied sol-gel method on LaAlO₃ substrates. The microstructural evolution of the films on heat treatment was examined with X-ray diffraction. With the aid of PEG, the formation of the pyrochlore phase was suppressed and the perovskite phase formed directly from the amorphous gel film. The multilayer films with a thickness around 0.25 μm showed a single perovskite phase without any detectable pyrochlore structure. Microscopic images showed uniform grain size of a few tens of nanometers. The role of the polymer dramatically promoting the perovskite phase was investigated with the aid of X-ray photoelectron spectroscopy and thermal analysis. The dielectric constant of the obtained film was 4160 at 1 kHz. The film demonstrated typical ferroelectric hysteresis loops and exhibited excellent piezoelectric performance.     

环氧化橡胶及其合金的研究与应用

综述了国内外环氧化橡胶及其合金的研究现状和应用趋势,重点介绍了环氧化天然橡胶、环氧化聚丁二烯、环氧化苯乙烯-丁二烯-苯乙烯三嵌段共聚物及其合金的优点,以及影响其物理机械性能的因素和环氧化橡胶的发展方向。     

芪3在铅-锡-氟磷酸盐玻璃中的聚集及光谱特性

采用低温熔融法制备了有机染料芪3掺杂的不同浓度的铅-锡-氟磷酸盐玻璃,通过对掺杂玻璃激发光谱、发射光谱和吸收光谱的测试,研究了芪3在无机玻璃中的聚集状态和光谱性能。 结果表明,有机染料芪3以单体和二聚物的形式共存于无机玻璃中,和芪3单体分子的激发峰相比,二聚物的激发峰位于短波段,随掺杂浓度的增加,掺杂玻璃的发射峰发生红移,同时在荧光光谱中观察到浓度猝灭现象;芪3分子与无机玻璃通过亲水作用发生了键合,从而导致芪3在无机玻璃中的吸收光谱和发射光谱比在乙醇溶液中出现较大红移;与芪3在乙醇溶液中的荧光强度相比,芪3分子受无机玻璃的“笼”化作用有效的提高了其荧光强度。     

Conversion of Methane to Ethylene with BaCe_(0.9)Y_(0.1)Co_xO_(3-δ) Hydrogen Permeation Membrane

Dehydrogenation coupling of methane (DCM),which can be effectively used to produce low carbon alkenes,has the advantages of rich raw materials,simple reaction device,low energy consumption,etc.Herein,we report a series of Co doped perovskite porous-dense Ba Ce_(0.9)Y_(0.1)Co_xO_(3-δ)(BCYCx) membrane for DCM.After treatment in a reduced atmosphere,a large number of Co nanoparticles will exsolute on the surface of BCY.The metal-oxide interface is helpful to activate the C–H bonds,inhibit the carbon deposition,and so on.The XRD,SEM and XPS prove that Co nanoparticles homogeneously distributed on the BCYCx porous layers,which will create a large quantity of catalytic active sites.At 1100℃,the highest concentration of C_2 product was 5.66%(5.25%ethane+0.41%ethylene)in output gas when methane conversion reaches a maximum value of 24.8%,and the C_2 selectivity gets to 45.6%.We further demonstrate the catalytic performance of high-temperature DCM without obvious decrease after running for 30hours.     

熔石英再沉积层结构的纳米级表征和杂质分析

利用原子力显微镜观察熔石英不同蚀刻时间的表面形貌,结合二次离子质谱分析,研究了熔石英的再沉积层结构和杂质分布。结果表明,熔石英表面深度10 nm的再沉积层内存在大量微裂纹和杂质,经蚀刻展开形成nm级划痕和坑点,其分布随着深度增加呈指数衰减。根据nm级划痕密度、宽深比随蚀刻深度变化的规律,估算出再沉积层厚度,估算结果与二次离子质谱测得的杂质嵌入深度基本一致。杂质元素嵌入深度与抛光微裂纹分布特征的关联性表明,杂质很有可能藏匿在抛光微裂纹中。