Fluorescence Properties of Europium and Terbium Triundecylenate-Containing Polymers and Solutions

Europium triundecylenate, Eu(UA)₃, and terbium triundecylenate, Tb(UA)₃, were prepared by the method described in our previous paper. Either Eu(UA)₃ or Tb(UA)₃ was dissolved in methacrylic acid (<20%) and copolymerized as a crosslinker with methyl methacrylate (>80) by bulk polymerization in molds made of two glass plates. The fluorescence spectroscopy of these Eu- or Tb-containing polymers under ultraviolet/visible excitation light was investigated. The fluorescence spectroscopy of solutions of Eu(UA)₃ or Tb(UA)₃ in methacrylic acid was measured and compared with that of the solid-state Eu- or Tb-containing polymers. The fluorescence excitation and emission spectra of the solutions and polymers showed the characteristic features of free Eu³⁺ or Tb³⁺. The lifetime fluorescence of the solutions and polymers with Eu³⁺ are also included.     

First Synthesis of 1,3-Alternate 25,27-Dialkyloxy-5,17-diarylcalix[4]arenes-crown-6 as New Cesium Selective Extractants by Suzuki Cross-coupling Reaction

The synthesis of new 25,27-dialkyloxy-5,17-diarylcalix[4]arenes-crown-6 1a–f in 1,3-alternate conformation by Suzuki cross-coupling reaction is reported. Their conformation was determined using ¹H, ¹³C, 2D NMR and ROESY analysis, and X-ray crystallography. Extraction experiments using a two-phase solvent method involving sodium, potassium or cesium picrate showed good extraction of the cesium cation. The X-ray crystal structures of 1,3-alternate 25,27-dipropoxy-5,17-diphenylcalix[4]arene-crown-6 ether 1a and its cesium picrate complex were established. Solid-state data were used to determine the complexation behavior of these new ligands. The efficiency of calixarenes 1a–f for cesium ion extraction could be ascribed to the rigidity and flatness linkages caused by the aryl groups at the lower rim of the aromatic moieties in the calixarene skeleton. In addition, the introduction of these aromatic moieties in positions 5 and 17 enhanced the solubility of the metal complexes in organic media.     

金属有机骨架薄膜材料的三阶非线性光学性能研究进展

金属有机骨架(MOFs)材料因其可设计的结构以及灵活可控的配位模式,在三阶非线性光学(NLO)领域引起了广泛的关注。与液体分散状态相比,MOFs在固体状态下的三阶NLO性能更为重要,这不仅可以深入了解MOFs本身所固有的光学性能,还有助于实现MOFs在光学器件中的实际应用。然而,由于散射的存在和透光率的限制,单独的MOFs材料难以直接实现固体状态下的三阶NLO性能研究,将MOFs制备成具有较好光学透过性的薄膜是研究其NLO性能最为可行的一种策略。MOFs薄膜不仅很好地继承了MOFs所固有的三阶NLO性能,而且还结合了薄膜的高透光率以及灵活的机械性能。基于此,本文分析总结了MOFs薄膜的制备方法及其NLO性能研究方面的相关工作,并根据目前MOFs薄膜在三阶NLO性能方面的研究现状对其未来发展予以了展望。     

AFS–3100原子荧光光度计联机异常故障排除

介绍了北京海光仪器公司生产的AFS–3100原子荧光光度计在使用过程中仪器与电脑通讯失败的故障原因及排除方法。     

微波消解–石墨炉原子吸收法测定化妆品中的铅

建立了微波消解–石墨炉原子吸收光谱法测定化妆品中铅的方法。探讨了样品前处理条件、基体改性剂的选择和优化、石墨炉升温条件等对测定结果的影响。在优化的试验条件下,铅的质量浓度在0~100 ng/mL范围内与吸光度具有良好的线性关系,线性相关系数r=0.9991,检出限为0.33 ng/mL。用该法对5种化妆品中的铅进行测定,加标回收率在95.0%~106.1%之间,测定结果的相对标准偏差不大于3.6%。该方法可应用于化妆品中痕量铅的分析。     

Highly porous magnetite/graphene nanocomposites for a solid-state electrochemiluminescence sensor on paper-based chips

Graphene-nanosheet-based highly porous magnetite nanocomposites (GN-HPMNs) have been prepared using a simple solvothermal method and used as an immobilization matrix for the fabrication of a solid-state electrochemiluminescence (ECL) sensor on paper-based chips. Highly porous Fe₃O₄ nanocrystal clusters were coated with acrylate and wrapped tightly on the skeleton of graphene nanosheets. The structures and sizes of the GN-HPMNs could be tuned by varying the proportions of the solvents ethylene glycol and diethylene glycol. Then, the relatively highly porous ones with an average diameter of about 65 nm were combined with Nafion to form composite films on an electrode surface for immobilization of Ru(bpy)₃ ²⁺ (bpy is 2,2′-bipyridine). Because of their porosity, negatively charged surface, and cooperative characteristics of magnetic nanomaterials and graphene, under an external magnetic field, the GN-HPMNs ensured effective immobilization, excellent electron transfer, and long-term stability of Ru(bpy)₃ ²⁺ in the composite film. The sensor developed exhibited excellent reproducibility with a relative standard deviation of 0.65 % for 30 continuous cycles. It was found to be much more favorable for detecting compounds containing tertiary amino groups and DNAs with guanine and adenine. A detection limit (signal-to-noise ratio of 3) of 5.0 nM was obtained for tripropylamine. As an application example, 0.5 nM single-nucleotide mismatch could be detected. This was the first attempt to introduce magnetic nanomaterials and an external magnetic field into paper-based chips. The sensor developed has the advantages of high sensitivity, good stability, and wide potential applicability as well as simplicity, low cost, and good disposability.

Total Synthesis of α-Elvucitabine

Total synthesis of α-elvucitabine was achieved in 26% overall yield by a concise nine-step procedure starting from L-lyxose, with trimethylsilyl trifluoromethaneoulfonate (TMSOTf)–mediated stereocontrolled α-N-glycosidation and olefination through Barton–McCombie deoxygenation being the key steps, and the stereochemistry of the product was determined by nuclear Overhauser effect spectroscopy.     

The role of benzoic acid in proline‐catalyzed asymmetric michael addition: A density functional theory study

In asymmetric Michael addition between ketones and nitroolefins catalyzed by L ‐proline, we observed that it was benzoic acid or its derivatives rather than other proton acid that could accelerate the reaction greatly, and different benzoic acid derivatives brought different yields. To explain the experimental phenomena, a density functional theory study was performed to elucidate the mechanism of proline‐catalyzed asymmetric Michael addition with benzoic acid. The results of the theoretical calculation at the level of B3LYP/6‐311+G(2df,p)//B3LYP/6‐31G(d) demonstrated that benzoic acid played two major roles in the formation of nitroalkane: assisting proton transfer and activating the nitro group. In the stage of enamine formation from imine, the energy profiles of benzoic acid derivatives were also calculated to investigate the reasons why different benzoic acid derivatives caused different yields. The results demonstrated that the pK_a value was the major factor for p‐substituted benzoic acid derivatives to improve the yields, whereas for m/o‐substituted benzoic acid derivatives, both pK_a value and electronic and steric effects could significantly increase the yields. The calculated results would be very helpful for understanding the reaction mechanism of Michael addition and provide some insights into the selection of efficient additives for similar experiments. © 2012 Wiley Periodicals, Inc.     

Ferric(III) Nitrate Supported on Kieselguhr: A New Reagent for Selective Oxidation of Alcohols

A selective and effective oxidation of alcohols into the corresponding aldehydes and ketones, respectively, with a new reagent, ferric(III) nitrate supported on kieselguhr, under heterogeneous conditions is reported.