一种蓝光发射星型有机分子的合成及光电性质

采用分子设计的思想,通过多步反应合成了一种新型的以N原子为中心的蓝光发射星型有机小分子。用1H NMR,MS和元素分析进行了表征,研究了化合物的热稳定性和真空镀膜膜层的光致发光性质,用循环伏安法测定了其电化学性能。结果表明,这种合成的有机化合物光致发光性能优良(量子效率达到87%),热稳定性好,可作为制作有机电致发光器件的候选材料。     

Effect of sound wave stress on antioxidant enzyme activities and lipid peroxidation of Dendrobium candidum

The effect of sound wave stress on important medicinal plant, Dendrobium candidum Wall. ex Lindl, was investigated, including the responses on malondialdehyde (MDA) content, the activities change of superoxide dismutase (SOD), catalase (CAT), peroxidase (POD) and ascorbate peroxidase (APX). Results were found that the activities of SOD, CAT, POD and APX enhanced totally in different organs of D. candidum, as leaves, stems and roots, in response to the stress. Furthermore there happened similar shift of antioxidant enzymes activities, which increased in the initial stimulation and decreased afterwards. Data showed SOD, CAT, POD and APX activities ascended to max at day 9, 6, 9 and 12 in leaves, at day 9, 6, 12 and 9 in stems, and at day 12, 6, 9 and 9 in roots, respectively. As a lipid peroxidation parameter, MDA content in different organs increased in the beginning, dropped afterward, and increased again in the late. Anyway the total trend was the rise of MDA level compared to the control. It was interesting that the MDA content appeared the lowest levels almost when the antioxidant enzymes activities were up to the highest. Our results demonstrated the different organs of D. candidum might produce accumulation of active oxygen species (AOS) under initial treatment of sound wave stress. Later AOS might start to reduce due to the enhancement of antioxidant enzymes activities treated by the stress. The data revealed that the antioxidant metabolism was to be important in determining the ability of plants to survive in sound stress, and the up regulation of these enzymes activities would help to reduce the build up of AOS, which could protect plant cells from oxidative damage. Moreover, different cell compartments might activate different defensive system to reduce excessive amount of AOS. Finally the mechanism of this action was also discussed simply.     

Synthesis of aza-naphthindolizinedione derivatives

A series of aza-naphthindolizinedione derivatives, such as indolizinoquinolinedione derivatives, indolizinophthalazinedione derivatives and indolizinoquinoxalinedione derivatives were designed and synthesized. The synthetic pathway was also proposed.     

QuEChERS-高效液相色谱法检测蔬菜中的吡虫啉、虫酰肼、阿维菌素和噻螨酮

将一种新的QuEChERS样品处理方法进行了提取及净化的改进,结合HPLC对蔬菜中吡虫啉、虫酰肼、阿维菌素和噻螨酮4种农药进行同时检测,取得了满意结果。以乙腈-水为流动相,梯度洗脱,269、240 nm双波长检测,流速1.0 mL/min。检出限分别为:吡虫啉0.02 mg/kg、虫酰肼0.02 mg/kg、阿维菌素0.10 mg/kg、噻螨酮0.05 mg/kg。在添加浓度为0.05~1.0 mg/kg范围内,4种化合物回收率在80%~100%之间,相对标准偏差1%~10%。方法适用于蔬菜中吡虫啉、虫酰肼、阿维菌素和噻螨酮4种农药残留量的同时检测。     

烟草中克百威和抗蚜威残留量测定

采用液相色谱-质谱联用技术(LC-MS-MS)检测了烟草中的克百威和抗蚜威两种氨基甲酸酯类农药的残留量。样品用乙腈超声波提取,以甲醇-50mmol甲酸铵为梯度流动相,C18柱分离,电喷雾正离子选择反应监测(SRM)模式定量分析。结果表明,克百威和抗蚜威的平均加标回收率为96.05%~104.0%,相对标准偏差为2.8%~5.7%。样品前处理不含净化和浓缩步骤,操作简单。     

不饱和类硅烯H2C=SiNaCl的密度泛函理论研究

采用密度泛函理论方法,在B3LYP/6-311G(d,p)水平上研究了不饱和类硅烯H2C=SiNaCl的结构.结果表明,不饱和类硅烯H2C=SiNaCl共有4种平衡构型,其中非平面的p-配合物型构型能量最低,是不饱和类硅烯H2C=SiNaCl存在的主要构型.对平衡构型间异构化反应的过渡态进行了计算,求得了转化势垒.计算预言了最稳定构型的振动频率和红外强度.     

综合创新型实验:乙胺嘧啶合成的设计与教学实践

乙胺嘧啶(商品名:达拉匹林)是一种抗寄生虫药物,改进了合成方法,并设计转化为创新型综合教学实验。从对氯苯乙腈出发,使用丙酸乙酯为酰化试剂,在叔丁醇钾作用下得到烯醇前体。在三甲基氧鎓四氟硼酸盐(Me3O·BF4,Meerwein盐)和碱作用下进行选择性甲基化反应得到烯醇甲醚后,与胍在碱性条件下环化得到最终产物达拉匹林,并通过红外光谱、核磁共振对其结构进行表征。改进后的实验方法具有重现性好、毒性低、操作方便、实验微型化等优点。实验过程中不仅提升了学生的实验技能和科研思维,更提高了学生的创新能力和绿色环保意识。     

电感耦合等离子体原子发射光谱法测定镍基单晶高温合金中Mo、W、Ta、Re、Ru时元素之间相互干扰的消除与校正的研究

称取镍基单晶高温合金0.100 0g于聚四氟乙烯烧杯中,先令其与盐酸9mL和硝酸1mL加热反应,待反应缓慢时滴加氢氟酸2mL并继续加热使样品完全溶解。加入500g·L^-1酒石酸溶液2mL,冷却至室温,在塑料容量瓶中加水定容至100.0mL。按仪器工作条件采用电感耦合等离子体原子发射光谱法测定其中5种合金元素(Mo、W、Ta、Re、Ru)的含量,选择分析谱线依次为204.598,207.911,240.063,197.312,240.272nm。结果发现:除了Re外,其余4种元素的测定中均受共存元素的光谱干扰,严重影响了测定结果的准确性。为克服其干扰,除了采用基体匹配法消除镍的基体干扰外,试验采用混合校正系数矩阵法对测定结果进行校准。通过一系列试验计算得到混合校准系数矩阵K,并应用于模拟样品的分析。结果表明:经过矩阵K的校准,所测定的5种元素的准确度显著提高,达到了消除共存元素之间光谱干扰的目的。通过精密度试验,测得上述5种元素测定值的相对标准偏差(n=11)均在1.5%以下,并通过标准加入法进行回收试验,测得5种元素的回收率为97.0%~105%。     

一种天线分子与卟啉染料自组装在染料敏化太阳能电池中的应用

以卟啉分子H2-pTCPP作为基础染料,通过配位自组装的方法将天线分子S3修饰到染料结构中。结果表明经天线分子修饰后染料敏化太阳能电池器件的整体性能得到了极大的改善。天线效应有效地提高了器件的光子捕获能力,光电流得到了显著的提高,并且电荷复合行为也得到了明显的抑制。基于H2-pTCPP的电池器件显示了1.18%的转换效率,而经过天线分子修饰后的Mn-pTCPP+S3显示了2.64%的转换效率,性能提高了1.2倍。     

双金属氮化物Co3W3N/CNTs纳米复合材料的制备及其室温常压氮还原性能

采用水热法并经氨气保护热处理制备了双过渡金属氮化物Co3W3N/CNTs复合材料,得到了价格低廉且拥有良好氮电化学还原性能(NRR)的催化剂。通过调节已经预氧化的CNTs与过渡金属氮化物前驱体CoWO4的比例以及氨气热处理温度,实现了Co3W3N在CNTs表面的均匀负载。扫描电子显微镜(SEM)及透射电子显微镜(TEM)测试结果显示该电化学活性纳米微粒均匀地分散于CNTs表面,表明经预氧化的CNTs由于表面富集了较多的活性基团,有利于双过渡金属氮化物的分散生长。热处理后CNTs表面的Co3W3N微粒尺寸约为20 nm,相较于无载体的Co3W3N尺寸(100 nm)有明显减小。室温条件下,在N2饱和的0.01 mol·L^-1 H2SO4溶液中测试了该纳米复合材料在不同过电位下的NRR,该材料在-0.3 V(vs RHE)时的产氨率及法拉第效率分别可达12.73μg·h^-1·cm-2和13.59%,对比同样条件下,纯相Co3W3N的产氨率及法拉第效率仅为1.08μg·h^-1·cm^-2和1.76%。结果表明,通过水热反应和氨气保护热处理的Co3W3N/CNTs纳米复合材料具有良好的NRR性能。