Design of a circular Dammann grating

A novel circular Dammann grating is proposed to generate uniform-intensity impulse rings corresponding to different diffraction orders in the far field. The intensities of the rings are determined by the coefficients of the circular sine series decomposition of the grating function. The definition of diffraction efficiency and uniformity for this novel device are described. Numerical solutions of binary phase circular Dammann gratings are presented. A binary phase three-order circular Dammann grating of pi phase depth is fabricated by an e-beam direct writing technique and is experimentally demonstrated.     

Solid-state laser spectral narrowing using a volumetric photothermal refractive Bragg grating cavity mirror

Dramatic spectral narrowing of two normally broadband lasers, Ti:sapphire and Cr:LiSAF, was achieved by simply replacing the output mirror with a reflective, volumetric Bragg grating recorded in photothermal refractive glass. The output power of each laser was unchanged from that obtained using dielectric coated output mirrors with the same output coupling as the Bragg grating while spectral brightness increased by 3 orders of magnitude.     

Tens of GHz Tantalum pentoxide‐based micro‐ring all‐optical modulator for Si photonics

A tantalum pentoxide‐based (Ta₂O₅‐based) micro‐ring all‐optical modulator was fabricated. The refractive index inside the micro‐ring cavity was modified using the Kerr effect by injecting a pumped pulse. The transmittance of the ring resonator was controlled to achieve all‐optical modulation at the wavelength of the injected probe. When 12 GHz pulses with a peak power of 1.2 W were coupled in the ring cavity, the transmission spectrum of the Ta₂O₅ resonator was red‐shifted by 0.04 nm because of the Kerr effect. The relationship between the modulation depth and gap of the Ta₂O₅ directional coupler is discussed. An optimized gap of 1100 nm was obtained, and a maximum buildup factor of 11.7 with 84% modulation depth was achieved. The nonlinear refractive index of Ta₂O₅ at 1.55 μm was estimated as 3.4 × 10^?14 cm²/W based on the Kerr effect, which is almost an order of magnitude higher than that of Si₃N₄. All results indicate that Ta₂O₅ has potential for use in nonlinear waveguide applications with modulation speeds as high as tens of GHz.

     

Failure of Russell-Saunders coupling in the 5f states of plutonium

Using high energy-electron energy loss spectroscopy, transmission electron microscopy, and synchrotron-radiation-based x-ray absorption spectroscopy, we provide the first experimental evidence that Russell-Saunders (LS) coupling fails for the 5f states of Pu. These results support the assumption that only the use of jj or intermediate coupling is appropriate for the 5f states of Pu. High energy-electron energy loss spectroscopy experiments were performed by use of a transmission electron microscope and are coupled with image and diffraction data; therefore, the measurements are completely phase specific.     

Property changes of electroplated Cu/Co alloys and multilayers by organic additives

We investigated the change of magnetic properties of the electroplated Cu/Co alloys and multilayers caused by organic additives and high temperature annealing. When plated with a pure Cu/Co electrolyte, the alloy contained ∼25% of Cu and ∼75% of Co. The alloy was made of hcp-Co, fcc-Co and Cu(1 1 1) and was super-paramagnetic at room temperature. As we add a few organic additives in the plating electrolyte, the hcp-Co of the films disappeared. The organic additives contained in the electrolytes changed paramagnetic Cu/Co multilayers to ferromagnets. High-temperature thermal annealing increased coercivity due to the growth of the Co grains.     

Preparation of Fe–Si–B–Nb amorphous powder cores with excellent high-frequency magnetic properties

FeSiBNb amorphous powder cores were prepared with the amorphous powder by gas atomization and subsequent hot pressing of resulting powder after creating oxide layers on the amorphous powder. Fully amorphous FeSiBNb powders with good soft magnetic properties were successfully obtained in the particle size range below 100 μm. FeSiBNb amorphous powder cores exhibit stable permeability up to 10 MHz, showing excellent high-frequency characteristics.     

Wavelength and power monitoring of DWDM systems using scanning F–P filter calibrated with a F–P laser

A novel technique to overcome the long-term drift and hysteresis of a scanning Fabry–Perot filter was developed and applied to wavelength and power monitoring of DWDM system. By using the comb peaks generated by a temperature-stabilized, near threshold-biased Fabry–Perot diode laser as wavelength reference for the scanning Fabry–Perot filter, wavelength and power measurement accuracy of better than ±10 pm and 0.2 dB, respectively, were achieved.